* [PATCH] ath11k: Enable radar detection for 160MHz secondary segment
@ 2021-02-16 7:24 Lavanya Suresh
2021-02-16 8:05 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Lavanya Suresh @ 2021-02-16 7:24 UTC (permalink / raw)
To: ath11k; +Cc: linux-wireless, Lavanya Suresh
WMI_CHAN_INFO_DFS_FREQ2 needs to be set in wmi vdev start command chan
info parameter, to enable radar detection for secondary segment in 160MHz.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 893d74a..8dae097 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5757,13 +5757,14 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
arg.channel.chan_radar =
!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
+ arg.channel.freq2_radar =
+ !!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
+
arg.channel.passive = arg.channel.chan_radar;
spin_lock_bh(&ab->base_lock);
arg.regdomain = ar->ab->dfs_region;
spin_unlock_bh(&ab->base_lock);
-
- /* TODO: Notify if secondary 80Mhz also needs radar detection */
}
arg.channel.passive |= !!(chandef->chan->flags & IEEE80211_CHAN_NO_IR);
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-16 8:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-02-16 7:24 [PATCH] ath11k: Enable radar detection for 160MHz secondary segment Lavanya Suresh
2021-02-16 8:05 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).