[PATCH] ath11k: Update signal filled flag during sta_statistics drv op

[PATCH] ath11k: Update signal filled flag during sta_statistics drv op

[Sriram R]

Currently, though the peer rssi information is updated to station dump
from driver sta_statistics mac op, the info doesn't get updated
since the NL80211_STA_INFO_SIGNAL filled flag is not set in station
info. Hence update this flag while filling the rssi info.

Tested on: IPQ8074 WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <srirrama@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index de6c132..6c4049d 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5610,6 +5610,7 @@ static void ath11k_mac_op_sta_statistics(struct ieee80211_hw *hw,
 
 	/* TODO: Use real NF instead of default one. */
 	sinfo->signal = arsta->rssi_comb + ATH11K_DEFAULT_NOISE_FLOOR;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
 }
 
 static const struct ieee80211_ops ath11k_ops = {
-- 
2.7.4

Re: [PATCH] ath11k: Update signal filled flag during sta_statistics drv op

[Kalle Valo]

Sriram R <srirrama@codeaurora.org> wrote:

> Currently, though the peer rssi information is updated to station dump
> from driver sta_statistics mac op, the info doesn't get updated
> since the NL80211_STA_INFO_SIGNAL filled flag is not set in station
> info. Hence update this flag while filling the rssi info.
> 
> Tested on: IPQ8074 WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Sriram R <srirrama@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

f277eb0500b4 ath11k: Update signal filled flag during sta_statistics drv op

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20210224090241.3098-1-srirrama@codeaurora.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches