From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Baochen Qiang <bqiang@codeaurora.org>,
Govind Singh <govinds@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/7] ath11k: add hw reg support for WCN6855
Date: Tue, 11 May 2021 19:22:08 +0300 [thread overview]
Message-ID: <20210511162214.29475-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210511162214.29475-1-jouni@codeaurora.org>
From: Baochen Qiang <bqiang@codeaurora.org>
Reg address of WCN6855 is different from other devices,
so add separate reg definition for this target.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/hw.c | 71 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hw.h | 1 +
2 files changed, 72 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 377ae8d5b58f..d9d7c4608052 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1688,3 +1688,74 @@ const struct ath11k_hw_regs qcn9074_regs = {
.pcie_qserdes_sysclk_en_sel = 0x01e0e0a8,
.pcie_pcs_osc_dtct_config_base = 0x01e0f45c,
};
+
+const struct ath11k_hw_regs wcn6855_regs = {
+ /* SW2TCL(x) R0 ring configuration address */
+ .hal_tcl1_ring_base_lsb = 0x00000690,
+ .hal_tcl1_ring_base_msb = 0x00000694,
+ .hal_tcl1_ring_id = 0x00000698,
+ .hal_tcl1_ring_misc = 0x000006a0,
+ .hal_tcl1_ring_tp_addr_lsb = 0x000006ac,
+ .hal_tcl1_ring_tp_addr_msb = 0x000006b0,
+ .hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c0,
+ .hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c4,
+ .hal_tcl1_ring_msi1_base_lsb = 0x000006d8,
+ .hal_tcl1_ring_msi1_base_msb = 0x000006dc,
+ .hal_tcl1_ring_msi1_data = 0x000006e0,
+ .hal_tcl2_ring_base_lsb = 0x000006e8,
+ .hal_tcl_ring_base_lsb = 0x00000798,
+
+ /* TCL STATUS ring address */
+ .hal_tcl_status_ring_base_lsb = 0x000008a0,
+
+ /* REO2SW(x) R0 ring configuration address */
+ .hal_reo1_ring_base_lsb = 0x00000244,
+ .hal_reo1_ring_base_msb = 0x00000248,
+ .hal_reo1_ring_id = 0x0000024c,
+ .hal_reo1_ring_misc = 0x00000254,
+ .hal_reo1_ring_hp_addr_lsb = 0x00000258,
+ .hal_reo1_ring_hp_addr_msb = 0x0000025c,
+ .hal_reo1_ring_producer_int_setup = 0x00000268,
+ .hal_reo1_ring_msi1_base_lsb = 0x0000028c,
+ .hal_reo1_ring_msi1_base_msb = 0x00000290,
+ .hal_reo1_ring_msi1_data = 0x00000294,
+ .hal_reo2_ring_base_lsb = 0x0000029c,
+ .hal_reo1_aging_thresh_ix_0 = 0x000005bc,
+ .hal_reo1_aging_thresh_ix_1 = 0x000005c0,
+ .hal_reo1_aging_thresh_ix_2 = 0x000005c4,
+ .hal_reo1_aging_thresh_ix_3 = 0x000005c8,
+
+ /* REO2SW(x) R2 ring pointers (head/tail) address */
+ .hal_reo1_ring_hp = 0x00003030,
+ .hal_reo1_ring_tp = 0x00003034,
+ .hal_reo2_ring_hp = 0x00003038,
+
+ /* REO2TCL R0 ring configuration address */
+ .hal_reo_tcl_ring_base_lsb = 0x00000454,
+ .hal_reo_tcl_ring_hp = 0x00003060,
+
+ /* REO status address */
+ .hal_reo_status_ring_base_lsb = 0x0000055c,
+ .hal_reo_status_hp = 0x00003078,
+
+ /* WCSS relative address */
+ .hal_seq_wcss_umac_ce0_src_reg = 0x1b80000,
+ .hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000,
+ .hal_seq_wcss_umac_ce1_src_reg = 0x1b82000,
+ .hal_seq_wcss_umac_ce1_dst_reg = 0x1b83000,
+
+ /* WBM Idle address */
+ .hal_wbm_idle_link_ring_base_lsb = 0x00000870,
+ .hal_wbm_idle_link_ring_misc = 0x00000880,
+
+ /* SW2WBM release address */
+ .hal_wbm_release_ring_base_lsb = 0x000001e8,
+
+ /* WBM2SW release address */
+ .hal_wbm0_release_ring_base_lsb = 0x00000920,
+ .hal_wbm1_release_ring_base_lsb = 0x00000978,
+
+ /* PCIe base address */
+ .pcie_qserdes_sysclk_en_sel = 0x01e0c0ac,
+ .pcie_pcs_osc_dtct_config_base = 0x01e0c628,
+};
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index c81a6328361d..4e7261c0dca1 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -318,5 +318,6 @@ struct ath11k_hw_regs {
extern const struct ath11k_hw_regs ipq8074_regs;
extern const struct ath11k_hw_regs qca6390_regs;
extern const struct ath11k_hw_regs qcn9074_regs;
+extern const struct ath11k_hw_regs wcn6855_regs;
#endif
--
2.25.1
next prev parent reply other threads:[~2021-05-11 16:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 16:22 [PATCH 0/7] ath11k: add support for WCN6855 Jouni Malinen
2021-05-11 16:22 ` Jouni Malinen [this message]
2021-05-31 15:09 ` [PATCH 1/7] ath11k: add hw reg " Kalle Valo
2021-06-12 10:31 ` Kalle Valo
2021-05-11 16:22 ` [PATCH 2/7] ath11k: add dp " Jouni Malinen
2021-05-11 16:22 ` [PATCH 3/7] ath11k: setup REO " Jouni Malinen
2021-05-11 16:22 ` [PATCH 4/7] ath11k: setup WBM_IDLE_LINK ring once again Jouni Malinen
2021-05-11 16:22 ` [PATCH 5/7] ath11k: add support to get peer id for WCN6855 Jouni Malinen
2021-05-11 16:22 ` [PATCH 6/7] ath11k: add support " Jouni Malinen
2021-05-11 16:22 ` [PATCH 7/7] ath11k: don't call ath11k_pci_set_l1ss " Jouni Malinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511162214.29475-2-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=bqiang@codeaurora.org \
--cc=govinds@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).