[PATCH AUTOSEL 5.10 082/137] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

[PATCH AUTOSEL 5.10 082/137] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]

At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.

Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 9d7dbfe7fe0c..c6da0cfb4afb 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1503,6 +1503,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
+	/* Device may be in ELP from the bootloader or kexec */
+	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
+	usleep_range(500000, 700000);
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
 	if (ret < 0)
 		goto out;
-- 
2.30.2

Re: [PATCH AUTOSEL 5.10 082/137] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1088 bytes --]

Hi!

> From: Tony Lindgren <tony@atomide.com>
> 
> [ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]
> 
> At least on wl12xx, reading the MAC after boot can fail with a warning
> at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
> The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
> after request_firmware_work_func().

> +++ b/drivers/net/wireless/ti/wl12xx/main.c
> @@ -1503,6 +1503,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
>  	u32 mac1, mac2;
>  	int ret;
>  
> +	/* Device may be in ELP from the bootloader or kexec */
> +	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
> +	if (ret < 0)
> +		goto out;
> +
> +	usleep_range(500000, 700000);
> +

While this probably improves things.... I don't believe delaying boot
by extra 200msec is good idea. This should simply be msleep(500),
AFAICT.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCH AUTOSEL 5.10 083/137] wl1251: Fix possible buffer overflow in wl1251_cmd_scan

[Sasha Levin]

From: Lee Gibson <leegib@gmail.com>

[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]

Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428115508.25624-1-leegib@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index 9547aea01b0f..ea0215246c5c 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -466,9 +466,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 		cmd->channels[i].channel = channels[i]->hw_value;
 	}
 
-	cmd->params.ssid_len = ssid_len;
-	if (ssid)
-		memcpy(cmd->params.ssid, ssid, ssid_len);
+	if (ssid) {
+		int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+		cmd->params.ssid_len = len;
+		memcpy(cmd->params.ssid, ssid, len);
+	}
 
 	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 	if (ret < 0) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 084/137] cw1200: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
index b65ec14136c7..4c30b5772ce0 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
@@ -53,6 +53,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = {
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
 	{ /* end: all zeroes */			},
 };
+MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
 
 /* hwbus_ops implemetation */
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 090/137] mt76: mt7615: fix fixed-rate tx status reporting

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]

Rely on the txs fixed-rate bit instead of info->control.rates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 5795e44f8a52..f44f478bb970 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1177,22 +1177,20 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 	int first_idx = 0, last_idx;
 	int i, idx, count;
 	bool fixed_rate, ack_timeout;
-	bool probe, ampdu, cck = false;
+	bool ampdu, cck = false;
 	bool rs_idx;
 	u32 rate_set_tsf;
 	u32 final_rate, final_rate_flags, final_nss, txs;
 
-	fixed_rate = info->status.rates[0].count;
-	probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
-
 	txs = le32_to_cpu(txs_data[1]);
-	ampdu = !fixed_rate && (txs & MT_TXS1_AMPDU);
+	ampdu = txs & MT_TXS1_AMPDU;
 
 	txs = le32_to_cpu(txs_data[3]);
 	count = FIELD_GET(MT_TXS3_TX_COUNT, txs);
 	last_idx = FIELD_GET(MT_TXS3_LAST_TX_RATE, txs);
 
 	txs = le32_to_cpu(txs_data[0]);
+	fixed_rate = txs & MT_TXS0_FIXED_RATE;
 	final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs);
 	ack_timeout = txs & MT_TXS0_ACK_TIMEOUT;
 
@@ -1214,7 +1212,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 
 	first_idx = max_t(int, 0, last_idx - (count - 1) / MT7615_RATE_RETRY);
 
-	if (fixed_rate && !probe) {
+	if (fixed_rate) {
 		info->status.rates[0].count = count;
 		i = 0;
 		goto out;
-- 
2.30.2

[PATCH AUTOSEL 5.10 097/137] mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 2707ff4dd7b1479dbd44ebb3c74788084cc95245 ]

The value of station mode is always 0.

Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 0232b66acb4f..8f01ca1694bc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -335,6 +335,9 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 	if (nss < 2)
 		return;
 
+	/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */
+	elem->phy_cap_info[7] |= min_t(int, nss - 1, 2) << 3;
+
 	if (vif != NL80211_IFTYPE_AP)
 		return;
 
@@ -348,9 +351,6 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 	c = IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB |
 	    IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB;
 	elem->phy_cap_info[6] |= c;
-
-	/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */
-	elem->phy_cap_info[7] |= min_t(int, nss - 1, 2) << 3;
 }
 
 static void
-- 
2.30.2

[PATCH AUTOSEL 5.10 098/137] rtl8xxxu: Fix device info for RTL8192EU devices

[Sasha Levin]

From: Pascal Terjan <pterjan@google.com>

[ Upstream commit c240b044edefa3c3af4014a4030e017dd95b59a1 ]

Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  | 11 +---
 .../realtek/rtl8xxxu/rtl8xxxu_8192e.c         | 59 +++++++++++++++++--
 2 files changed, 56 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index d6d1be4169e5..acb6b0cd3667 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -853,15 +853,10 @@ struct rtl8192eu_efuse {
 	u8 usb_optional_function;
 	u8 res9[2];
 	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
-	u8 res10[2];
-	u8 vendor_name[7];
-	u8 res11[2];
-	u8 device_name[0x0b];		/* 0xe8 */
-	u8 res12[2];
-	u8 serial[0x0b];		/* 0xf5 */
-	u8 res13[0x30];
+	u8 device_info[80];
+	u8 res11[3];
 	u8 unknown[0x0d];		/* 0x130 */
-	u8 res14[0xc3];
+	u8 res12[0xc3];
 };
 
 struct rtl8xxxu_reg8val {
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index 9f1f93d04145..199e7e031d7d 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -554,9 +554,43 @@ rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
 	}
 }
 
+static void rtl8192eu_log_next_device_info(struct rtl8xxxu_priv *priv,
+					   char *record_name,
+					   char *device_info,
+					   unsigned int *record_offset)
+{
+	char *record = device_info + *record_offset;
+
+	/* A record is [ total length | 0x03 | value ] */
+	unsigned char l = record[0];
+
+	/*
+	 * The whole device info section seems to be 80 characters, make sure
+	 * we don't read further.
+	 */
+	if (*record_offset + l > 80) {
+		dev_warn(&priv->udev->dev,
+			 "invalid record length %d while parsing \"%s\" at offset %u.\n",
+			 l, record_name, *record_offset);
+		return;
+	}
+
+	if (l >= 2) {
+		char value[80];
+
+		memcpy(value, &record[2], l - 2);
+		value[l - 2] = '\0';
+		dev_info(&priv->udev->dev, "%s: %s\n", record_name, value);
+		*record_offset = *record_offset + l;
+	} else {
+		dev_info(&priv->udev->dev, "%s not available.\n", record_name);
+	}
+}
+
 static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
 {
 	struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu;
+	unsigned int record_offset;
 	int i;
 
 	if (efuse->rtl_id != cpu_to_le16(0x8129))
@@ -604,12 +638,25 @@ static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
 	priv->has_xtalk = 1;
 	priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f;
 
-	dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
-	dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name);
-	if (memchr_inv(efuse->serial, 0xff, 11))
-		dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial);
-	else
-		dev_info(&priv->udev->dev, "Serial not available.\n");
+	/*
+	 * device_info section seems to be laid out as records
+	 * [ total length | 0x03 | value ] so:
+	 * - vendor length + 2
+	 * - 0x03
+	 * - vendor string (not null terminated)
+	 * - product length + 2
+	 * - 0x03
+	 * - product string (not null terminated)
+	 * Then there is one or 2 0x00 on all the 4 devices I own or found
+	 * dumped online.
+	 * As previous version of the code handled an optional serial
+	 * string, I now assume there may be a third record if the
+	 * length is not 0.
+	 */
+	record_offset = 0;
+	rtl8192eu_log_next_device_info(priv, "Vendor", efuse->device_info, &record_offset);
+	rtl8192eu_log_next_device_info(priv, "Product", efuse->device_info, &record_offset);
+	rtl8192eu_log_next_device_info(priv, "Serial", efuse->device_info, &record_offset);
 
 	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
 		unsigned char *raw = priv->efuse_wifi.raw;
-- 
2.30.2

[PATCH AUTOSEL 5.10 105/137] iwlwifi: mvm: don't change band on bound PHY contexts

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index d42165559df6..8cba923b1ec6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3794,6 +3794,7 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct cfg80211_chan_def chandef;
 	struct iwl_mvm_phy_ctxt *phy_ctxt;
+	bool band_change_removal;
 	int ret, i;
 
 	IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
@@ -3874,19 +3875,30 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	cfg80211_chandef_create(&chandef, channel, NL80211_CHAN_NO_HT);
 
 	/*
-	 * Change the PHY context configuration as it is currently referenced
-	 * only by the P2P Device MAC
+	 * Check if the remain-on-channel is on a different band and that
+	 * requires context removal, see iwl_mvm_phy_ctxt_changed(). If
+	 * so, we'll need to release and then re-configure here, since we
+	 * must not remove a PHY context that's part of a binding.
 	 */
-	if (mvmvif->phy_ctxt->ref == 1) {
+	band_change_removal =
+		fw_has_capa(&mvm->fw->ucode_capa,
+			    IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT) &&
+		mvmvif->phy_ctxt->channel->band != chandef.chan->band;
+
+	if (mvmvif->phy_ctxt->ref == 1 && !band_change_removal) {
+		/*
+		 * Change the PHY context configuration as it is currently
+		 * referenced only by the P2P Device MAC (and we can modify it)
+		 */
 		ret = iwl_mvm_phy_ctxt_changed(mvm, mvmvif->phy_ctxt,
 					       &chandef, 1, 1);
 		if (ret)
 			goto out_unlock;
 	} else {
 		/*
-		 * The PHY context is shared with other MACs. Need to remove the
-		 * P2P Device from the binding, allocate an new PHY context and
-		 * create a new binding
+		 * The PHY context is shared with other MACs (or we're trying to
+		 * switch bands), so remove the P2P Device from the binding,
+		 * allocate an new PHY context and create a new binding.
 		 */
 		phy_ctxt = iwl_mvm_get_free_phy_ctxt(mvm);
 		if (!phy_ctxt) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 106/137] iwlwifi: mvm: fix error print when session protection ends

[Sasha Levin]

From: Shaul Triebitz <shaul.triebitz@intel.com>

[ Upstream commit 976ac0af7ba2c5424bc305b926c0807d96fdcc83 ]

When the session protection ends and the Driver is not
associated or a beacon was not heard, the Driver
prints "No beacons heard...".
That's confusing for the case where not associated.
Change the print when not associated to "Not associated...".

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.41a5a5a894fa.I9eabb76e7a3a7f4abbed8f2ef918f1df8e825726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index 3939eccd3d5a..394598b14a17 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -345,6 +345,8 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,
 			 * and know the dtim period.
 			 */
 			iwl_mvm_te_check_disconnect(mvm, te_data->vif,
+				!te_data->vif->bss_conf.assoc ?
+				"Not associated and the time event is over already..." :
 				"No beacon heard and the time event is over already...");
 			break;
 		default:
@@ -843,6 +845,8 @@ void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm,
 			 * and know the dtim period.
 			 */
 			iwl_mvm_te_check_disconnect(mvm, vif,
+						    !vif->bss_conf.assoc ?
+						    "Not associated and the session protection is over already..." :
 						    "No beacon heard and the session protection is over already...");
 			spin_lock_bh(&mvm->time_event_lock);
 			iwl_mvm_te_clear_data(mvm, te_data);
-- 
2.30.2

[PATCH AUTOSEL 5.10 107/137] iwlwifi: mvm: support LONG_GROUP for WOWLAN_GET_STATUSES version

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit d65ab7c0e0b92056754185d3f6925d7318730e94 ]

It's been a while that the firmware uses LONG_GROUP by default
and not LEGACY_GROUP.
Until now the firmware wrongly advertise the WOWLAN_GET_STATUS
command's version with LEGACY_GROUP, but it is now being fixed.
In order to support both firmwares, first try to get the version
number of the command with the LONG_GROUP and if the firmware
didn't advertise the command version with LONG_GROUP, try to get
the command version with LEGACY_GROUP.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.cd6f4e421430.Iec07c746c8e65bc267e4750f38e4f74f2010ca45@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index d21143495e70..2a53792a69f9 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -1682,8 +1682,11 @@ struct iwl_wowlan_status *iwl_mvm_send_wowlan_get_status(struct iwl_mvm *mvm)
 	len = iwl_rx_packet_payload_len(cmd.resp_pkt);
 
 	/* default to 7 (when we have IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL) */
-	notif_ver = iwl_fw_lookup_notif_ver(mvm->fw, LEGACY_GROUP,
-					    WOWLAN_GET_STATUSES, 7);
+	notif_ver = iwl_fw_lookup_notif_ver(mvm->fw, LONG_GROUP,
+					    WOWLAN_GET_STATUSES, 0);
+	if (!notif_ver)
+		notif_ver = iwl_fw_lookup_notif_ver(mvm->fw, LEGACY_GROUP,
+						    WOWLAN_GET_STATUSES, 7);
 
 	if (!fw_has_api(&mvm->fw->ucode_capa,
 			IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL)) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 108/137] iwlwifi: pcie: free IML DMA memory allocation

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]

In the case of gen3 devices with image loader (IML) support,
we were leaking the IML DMA allocation and never freeing it.
Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.07e117dbedb7.I7bb9ebbe0617656986c2a598ea5e827b533bd3b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c  | 15 ++++++++++-----
 .../net/wireless/intel/iwlwifi/pcie/internal.h    |  3 +++
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
index ec1d6025081d..56f63f5f5dd3 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
@@ -126,7 +126,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	struct iwl_prph_scratch *prph_scratch;
 	struct iwl_prph_scratch_ctrl_cfg *prph_sc_ctrl;
 	struct iwl_prph_info *prph_info;
-	void *iml_img;
 	u32 control_flags = 0;
 	int ret;
 	int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
@@ -234,14 +233,15 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	trans_pcie->prph_scratch = prph_scratch;
 
 	/* Allocate IML */
-	iml_img = dma_alloc_coherent(trans->dev, trans->iml_len,
-				     &trans_pcie->iml_dma_addr, GFP_KERNEL);
-	if (!iml_img) {
+	trans_pcie->iml = dma_alloc_coherent(trans->dev, trans->iml_len,
+					     &trans_pcie->iml_dma_addr,
+					     GFP_KERNEL);
+	if (!trans_pcie->iml) {
 		ret = -ENOMEM;
 		goto err_free_ctxt_info;
 	}
 
-	memcpy(iml_img, trans->iml, trans->iml_len);
+	memcpy(trans_pcie->iml, trans->iml, trans->iml_len);
 
 	iwl_enable_fw_load_int_ctx_info(trans);
 
@@ -290,6 +290,11 @@ void iwl_pcie_ctxt_info_gen3_free(struct iwl_trans *trans)
 	trans_pcie->ctxt_info_dma_addr = 0;
 	trans_pcie->ctxt_info_gen3 = NULL;
 
+	dma_free_coherent(trans->dev, trans->iml_len, trans_pcie->iml,
+			  trans_pcie->iml_dma_addr);
+	trans_pcie->iml_dma_addr = 0;
+	trans_pcie->iml = NULL;
+
 	iwl_pcie_ctxt_info_free_fw_img(trans);
 
 	dma_free_coherent(trans->dev, sizeof(*trans_pcie->prph_scratch),
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index ff542d2f0054..f05025e8d11d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -336,6 +336,8 @@ struct cont_rec {
  *	Context information addresses will be taken from here.
  *	This is driver's local copy for keeping track of size and
  *	count for allocating and freeing the memory.
+ * @iml: image loader image virtual address
+ * @iml_dma_addr: image loader image DMA address
  * @trans: pointer to the generic transport area
  * @scd_base_addr: scheduler sram base address in SRAM
  * @kw: keep warm address
@@ -388,6 +390,7 @@ struct iwl_trans_pcie {
 	};
 	struct iwl_prph_info *prph_info;
 	struct iwl_prph_scratch *prph_scratch;
+	void *iml;
 	dma_addr_t ctxt_info_dma_addr;
 	dma_addr_t prph_info_dma_addr;
 	dma_addr_t prph_scratch_dma_addr;
-- 
2.30.2

[PATCH AUTOSEL 5.10 109/137] iwlwifi: pcie: fix context info freeing

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]

After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.

Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
index 4c3ca2a37696..b031e9304983 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
@@ -269,7 +269,8 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr)
 	/* now that we got alive we can free the fw image & the context info.
 	 * paging memory cannot be freed included since FW will still use it
 	 */
-	iwl_pcie_ctxt_info_free(trans);
+	if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210)
+		iwl_pcie_ctxt_info_free(trans);
 
 	/*
 	 * Re-enable all the interrupts, including the RF-Kill one, now that
-- 
2.30.2

[PATCH AUTOSEL 5.10 113/137] wireless: wext-spy: Fix out-of-bounds warning

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]

Fix the following out-of-bounds warning:

net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/wext-spy.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
index 33bef22e44e9..b379a0371653 100644
--- a/net/wireless/wext-spy.c
+++ b/net/wireless/wext-spy.c
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
+	spydata->spy_thr_low = threshold->low;
+	spydata->spy_thr_high = threshold->high;
 
 	/* Clear flag */
 	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold->low = spydata->spy_thr_low;
+	threshold->high = spydata->spy_thr_high;
 
 	return 0;
 }
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device *	dev,
 	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
 	threshold.addr.sa_family = ARPHRD_ETHER;
 	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	threshold.qual = *wstats;
 	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold.low = spydata->spy_thr_low;
+	threshold.high = spydata->spy_thr_high;
 
 	/* Send event to user space */
 	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
-- 
2.30.2

Re: [PATCH AUTOSEL 5.10 113/137] wireless: wext-spy: Fix out-of-bounds warning

[Johannes Berg]

On Tue, 2021-07-06 at 07:21 -0400, Sasha Levin wrote:
> From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
> 
> [ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]
> 
> Fix the following out-of-bounds warning:
> 
> net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

For the record: while this clearly isn't harmful, there's almost
basically no chance that the stable kernel will ever compile warning-
free with -Warray-bounds, so there's not much point in backporting this
patch.

johannes

Re: [PATCH AUTOSEL 5.10 113/137] wireless: wext-spy: Fix out-of-bounds warning

[Sasha Levin]

On Tue, Jul 06, 2021 at 04:08:09PM +0200, Johannes Berg wrote:
>On Tue, 2021-07-06 at 07:21 -0400, Sasha Levin wrote:
>> From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
>>
>> [ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]
>>
>> Fix the following out-of-bounds warning:
>>
>> net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
>
>For the record: while this clearly isn't harmful, there's almost
>basically no chance that the stable kernel will ever compile warning-
>free with -Warray-bounds, so there's not much point in backporting this
>patch.

While the warning is a non-issue, it wasn't clear if it fixes a real bug
or just silences the warning which is why I took it in.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.10 114/137] cfg80211: fix default HE tx bitrate mask in 2G band

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 9df66d5b9f45c39b3925d16e8947cc10009b186d ]

In 2G band, a HE sta can only supports HT and HE, but not supports VHT.
In this case, default HE tx bitrate mask isn't filled, when we use iw to
set bitrates without any parameter.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210609075944.51130-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index daf3f29c7f0c..8fb0478888fb 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4625,11 +4625,10 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 		       sband->ht_cap.mcs.rx_mask,
 		       sizeof(mask->control[i].ht_mcs));
 
-		if (!sband->vht_cap.vht_supported)
-			continue;
-
-		vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
-		vht_build_mcs_mask(vht_tx_mcs_map, mask->control[i].vht_mcs);
+		if (sband->vht_cap.vht_supported) {
+			vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
+			vht_build_mcs_mask(vht_tx_mcs_map, mask->control[i].vht_mcs);
+		}
 
 		he_cap = ieee80211_get_he_iftype_cap(sband, wdev->iftype);
 		if (!he_cap)
-- 
2.30.2

[PATCH AUTOSEL 5.10 115/137] mac80211: consider per-CPU statistics if present

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d656a4c6ead6c3f252b2f2532bc9735598f7e317 ]

If we have been keeping per-CPU statistics, consider them
regardless of USES_RSS, because we may not actually fill
those, for example in non-fast-RX cases when the connection
is not compatible with fast-RX. If we didn't fill them, the
additional data will be zero and not affect anything, and
if we did fill them then it's more correct to consider them.

This fixes an issue in mesh mode where some statistics are
not updated due to USES_RSS being set, but fast-RX isn't
used.

Reported-by: Thiraviyam Mariyappan <tmariyap@codeaurora.org>
Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/sta_info.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index f2fb69da9b6e..641a6657d0c9 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -2093,10 +2093,9 @@ static struct ieee80211_sta_rx_stats *
 sta_get_last_rx_stats(struct sta_info *sta)
 {
 	struct ieee80211_sta_rx_stats *stats = &sta->rx_stats;
-	struct ieee80211_local *local = sta->local;
 	int cpu;
 
-	if (!ieee80211_hw_check(&local->hw, USES_RSS))
+	if (!sta->pcpu_rx_stats)
 		return stats;
 
 	for_each_possible_cpu(cpu) {
@@ -2196,9 +2195,7 @@ static void sta_set_tidstats(struct sta_info *sta,
 	int cpu;
 
 	if (!(tidstats->filled & BIT(NL80211_TID_STATS_RX_MSDU))) {
-		if (!ieee80211_hw_check(&local->hw, USES_RSS))
-			tidstats->rx_msdu +=
-				sta_get_tidstats_msdu(&sta->rx_stats, tid);
+		tidstats->rx_msdu += sta_get_tidstats_msdu(&sta->rx_stats, tid);
 
 		if (sta->pcpu_rx_stats) {
 			for_each_possible_cpu(cpu) {
@@ -2277,7 +2274,6 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo,
 		sinfo->rx_beacon = sdata->u.mgd.count_beacon_signal;
 
 	drv_sta_statistics(local, sdata, &sta->sta, sinfo);
-
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_INACTIVE_TIME) |
 			 BIT_ULL(NL80211_STA_INFO_STA_FLAGS) |
 			 BIT_ULL(NL80211_STA_INFO_BSS_PARAM) |
@@ -2312,8 +2308,7 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo,
 
 	if (!(sinfo->filled & (BIT_ULL(NL80211_STA_INFO_RX_BYTES64) |
 			       BIT_ULL(NL80211_STA_INFO_RX_BYTES)))) {
-		if (!ieee80211_hw_check(&local->hw, USES_RSS))
-			sinfo->rx_bytes += sta_get_stats_bytes(&sta->rx_stats);
+		sinfo->rx_bytes += sta_get_stats_bytes(&sta->rx_stats);
 
 		if (sta->pcpu_rx_stats) {
 			for_each_possible_cpu(cpu) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 116/137] mac80211_hwsim: add concurrent channels scanning support over virtio

[Sasha Levin]

From: Weilun Du <wdu@google.com>

[ Upstream commit 626c30f9e77354301ff9162c3bdddaf92d9b5cf3 ]

This fixed the crash when setting channels to 2 or more when
communicating over virtio.

Signed-off-by: Weilun Du <wdu@google.com>
Link: https://lore.kernel.org/r/20210506180530.3418576-1-wdu@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 48 +++++++++++++++++++++------
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index f147d4feedb9..4ca0b06d09ad 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -557,6 +557,7 @@ struct mac80211_hwsim_data {
 	u32 ciphers[ARRAY_SIZE(hwsim_ciphers)];
 
 	struct mac_address addresses[2];
+	struct ieee80211_chanctx_conf *chanctx;
 	int channels, idx;
 	bool use_chanctx;
 	bool destroy_on_close;
@@ -1187,7 +1188,8 @@ static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)
 
 static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 				       struct sk_buff *my_skb,
-				       int dst_portid)
+				       int dst_portid,
+				       struct ieee80211_channel *channel)
 {
 	struct sk_buff *skb;
 	struct mac80211_hwsim_data *data = hw->priv;
@@ -1242,7 +1244,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 	if (nla_put_u32(skb, HWSIM_ATTR_FLAGS, hwsim_flags))
 		goto nla_put_failure;
 
-	if (nla_put_u32(skb, HWSIM_ATTR_FREQ, data->channel->center_freq))
+	if (nla_put_u32(skb, HWSIM_ATTR_FREQ, channel->center_freq))
 		goto nla_put_failure;
 
 	/* We get the tx control (rate and retries) info*/
@@ -1589,7 +1591,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 	_portid = READ_ONCE(data->wmediumd);
 
 	if (_portid || hwsim_virtio_enabled)
-		return mac80211_hwsim_tx_frame_nl(hw, skb, _portid);
+		return mac80211_hwsim_tx_frame_nl(hw, skb, _portid, channel);
 
 	/* NO wmediumd detected, perfect medium simulation */
 	data->tx_pkts++;
@@ -1705,7 +1707,7 @@ static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 	mac80211_hwsim_monitor_rx(hw, skb, chan);
 
 	if (_pid || hwsim_virtio_enabled)
-		return mac80211_hwsim_tx_frame_nl(hw, skb, _pid);
+		return mac80211_hwsim_tx_frame_nl(hw, skb, _pid, chan);
 
 	mac80211_hwsim_tx_frame_no_nl(hw, skb, chan);
 	dev_kfree_skb(skb);
@@ -2444,6 +2446,11 @@ static int mac80211_hwsim_croc(struct ieee80211_hw *hw,
 static int mac80211_hwsim_add_chanctx(struct ieee80211_hw *hw,
 				      struct ieee80211_chanctx_conf *ctx)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = ctx;
+	mutex_unlock(&hwsim->mutex);
 	hwsim_set_chanctx_magic(ctx);
 	wiphy_dbg(hw->wiphy,
 		  "add channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -2455,6 +2462,11 @@ static int mac80211_hwsim_add_chanctx(struct ieee80211_hw *hw,
 static void mac80211_hwsim_remove_chanctx(struct ieee80211_hw *hw,
 					  struct ieee80211_chanctx_conf *ctx)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = NULL;
+	mutex_unlock(&hwsim->mutex);
 	wiphy_dbg(hw->wiphy,
 		  "remove channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
 		  ctx->def.chan->center_freq, ctx->def.width,
@@ -2467,6 +2479,11 @@ static void mac80211_hwsim_change_chanctx(struct ieee80211_hw *hw,
 					  struct ieee80211_chanctx_conf *ctx,
 					  u32 changed)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = ctx;
+	mutex_unlock(&hwsim->mutex);
 	hwsim_check_chanctx_magic(ctx);
 	wiphy_dbg(hw->wiphy,
 		  "change channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -3059,6 +3076,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 		hw->wiphy->max_remain_on_channel_duration = 1000;
 		data->if_combination.radar_detect_widths = 0;
 		data->if_combination.num_different_channels = data->channels;
+		data->chanctx = NULL;
 	} else {
 		data->if_combination.num_different_channels = 1;
 		data->if_combination.radar_detect_widths =
@@ -3566,6 +3584,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	int frame_data_len;
 	void *frame_data;
 	struct sk_buff *skb = NULL;
+	struct ieee80211_channel *channel = NULL;
 
 	if (!info->attrs[HWSIM_ATTR_ADDR_RECEIVER] ||
 	    !info->attrs[HWSIM_ATTR_FRAME] ||
@@ -3592,6 +3611,17 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	if (!data2)
 		goto out;
 
+	if (data2->use_chanctx) {
+		if (data2->tmp_chan)
+			channel = data2->tmp_chan;
+		else if (data2->chanctx)
+			channel = data2->chanctx->def.chan;
+	} else {
+		channel = data2->channel;
+	}
+	if (!channel)
+		goto out;
+
 	if (!hwsim_virtio_enabled) {
 		if (hwsim_net_get_netgroup(genl_info_net(info)) !=
 		    data2->netgroup)
@@ -3603,7 +3633,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 
 	/* check if radio is configured properly */
 
-	if (data2->idle || !data2->started)
+	if ((data2->idle && !data2->tmp_chan) || !data2->started)
 		goto out;
 
 	/* A frame is received from user space */
@@ -3616,18 +3646,16 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 		mutex_lock(&data2->mutex);
 		rx_status.freq = nla_get_u32(info->attrs[HWSIM_ATTR_FREQ]);
 
-		if (rx_status.freq != data2->channel->center_freq &&
-		    (!data2->tmp_chan ||
-		     rx_status.freq != data2->tmp_chan->center_freq)) {
+		if (rx_status.freq != channel->center_freq) {
 			mutex_unlock(&data2->mutex);
 			goto out;
 		}
 		mutex_unlock(&data2->mutex);
 	} else {
-		rx_status.freq = data2->channel->center_freq;
+		rx_status.freq = channel->center_freq;
 	}
 
-	rx_status.band = data2->channel->band;
+	rx_status.band = channel->band;
 	rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]);
 	rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
 
-- 
2.30.2