linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Sriram R <srirrama@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 07/12] ath11k: Fix crash during firmware recovery on reo cmd ring access
Date: Thu, 22 Jul 2021 00:20:24 +0300	[thread overview]
Message-ID: <20210721212029.142388-7-jouni@codeaurora.org> (raw)
In-Reply-To: <20210721212029.142388-1-jouni@codeaurora.org>

From: Sriram R <srirrama@codeaurora.org>

In scenario when a peer is disassociating, there could be
multiple places where a reo cmd ring is accessed, such as
during aggregation teardown, tid queue cleanup, etc.

When this happens during firmware recovery where accessing of FW/HW
resources/registers is not recommended, accessing reo cmd ring in
this case could lead to crash or undefined behaviour.

Hence avoid this by checking for corresponding flag to avoid
accessing reo cmd ring during firmware recovery.

Sample crash:

[ 3936.456050] Unhandled fault: imprecise external abort (0x1c06) at 0x54bb842a
[ 3936.456411] WARN: Access Violation!!!, Run "cat /sys/kernel/debug/qcom_debug_logs/tz_log" for more details
[ 3936.467997] pgd = b4474000
[ 3936.477440] [54bb842a] *pgd=6fa61831, *pte=7f95d59f, *ppte=7f95de7e
<snip>
[ 3937.177436] [<8030ab10>] (_raw_spin_unlock_bh) from [<7f5e9eb8>] (ath11k_hal_reo_cmd_send+0x440/0x458 [ath11k])
[ 3937.185730] [<7f5e9eb8>] (ath11k_hal_reo_cmd_send [ath11k]) from [<7f601c4c>] (ath11k_dp_tx_send_reo_cmd+0x2c/0xcc [ath11k])
[ 3937.195524] [<7f601c4c>] (ath11k_dp_tx_send_reo_cmd [ath11k]) from [<7f602f10>] (ath11k_peer_rx_tid_reo_update+0x84/0xbc [ath11k])
[ 3937.206984] [<7f602f10>] (ath11k_peer_rx_tid_reo_update [ath11k]) from [<7f605a9c>] (ath11k_dp_rx_ampdu_stop+0xa8/0x130 [ath11k])
[ 3937.218532] [<7f605a9c>] (ath11k_dp_rx_ampdu_stop [ath11k]) from [<7f5f6730>] (ath11k_mac_op_ampdu_action+0x6c/0x98 [ath11k])
[ 3937.230250] [<7f5f6730>] (ath11k_mac_op_ampdu_action [ath11k]) from [<c7b6e890>] (___ieee80211_stop_rx_ba_session+0x98/0x144 [mac80211])
[ 3937.241499] [<c7b6e890>] (___ieee80211_stop_rx_ba_session [mac80211]) from [<c7b6cdd8>] (ieee80211_sta_tear_down_BA_sessions+0x4c/0xf4 [)
[ 3937.253833] [<c7b6cdd8>] (ieee80211_sta_tear_down_BA_sessions [mac80211]) from [<c7b63460>] (ieee80211_sta_eosp+0x5b8/0x960 [mac80211])
[ 3937.266764] [<c7b63460>] (ieee80211_sta_eosp [mac80211]) from [<c7b66da8>] (__sta_info_flush+0x9c/0x134 [mac80211])
[ 3937.278826] [<c7b66da8>] (__sta_info_flush [mac80211]) from [<c7b7bd00>] (ieee80211_stop_ap+0x14c/0x28c [mac80211])
[ 3937.289240] [<c7b7bd00>] (ieee80211_stop_ap [mac80211]) from [<7f509cf0>] (__cfg80211_stop_ap+0x4c/0xd8 [cfg80211])
[ 3937.299629] [<7f509cf0>] (__cfg80211_stop_ap [cfg80211]) from [<7f4dddec>] (cfg80211_leave+0x24/0x30 [cfg80211])
[ 3937.310041] [<7f4dddec>] (cfg80211_leave [cfg80211]) from [<7f4de03c>] (cfg80211_netdev_notifier_call+0x174/0x48c [cfg80211])
[ 3937.320457] [<7f4de03c>] (cfg80211_netdev_notifier_call [cfg80211]) from [<80339928>] (notifier_call_chain+0x40/0x68)
[ 3937.331636] [<80339928>] (notifier_call_chain) from [<803399a8>] (raw_notifier_call_chain+0x14/0x1c)
[ 3937.342221] [<803399a8>] (raw_notifier_call_chain) from [<8073bb00>] (call_netdevice_notifiers+0xc/0x14)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01240-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/dp_tx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 2f21e3378ae1..b00e78de36bc 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -622,6 +622,9 @@ int ath11k_dp_tx_send_reo_cmd(struct ath11k_base *ab, struct dp_rx_tid *rx_tid,
 	struct hal_srng *cmd_ring;
 	int cmd_num;
 
+	if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags))
+		return -ESHUTDOWN;
+
 	cmd_ring = &ab->hal.srng_list[dp->reo_cmd_ring.ring_id];
 	cmd_num = ath11k_hal_reo_cmd_send(ab, cmd_ring, type, cmd);
 
-- 
2.25.1


  parent reply	other threads:[~2021-07-21 21:21 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21 21:20 [PATCH 01/12] ath11k: Fix pktlog lite rx events Jouni Malinen
2021-07-21 21:20 ` [PATCH 02/12] ath11k: Update pdev tx and rx firmware stats Jouni Malinen
2021-07-21 21:20 ` [PATCH 03/12] ath11k: Avoid reg rules update during firmware recovery Jouni Malinen
2021-07-21 21:20 ` [PATCH 04/12] ath11k: Avoid race during regd updates Jouni Malinen
2021-07-21 21:20 ` [PATCH 05/12] ath11k: Add vdev start flag to disable hardware encryption Jouni Malinen
2021-07-21 21:20 ` [PATCH 06/12] ath11k: Assign free_vdev_map value before ieee80211_register_hw Jouni Malinen
2021-07-21 21:20 ` Jouni Malinen [this message]
2021-07-21 21:20 ` [PATCH 08/12] ath11k: Avoid "No VIF found" warning message Jouni Malinen
2021-07-21 21:20 ` [PATCH 09/12] ath11k: Add wmi peer create conf event in wmi_tlv_event_id Jouni Malinen
2021-07-21 21:20 ` [PATCH 10/12] ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware Jouni Malinen
2021-09-28 10:46   ` Kalle Valo
2021-09-28 12:01     ` Rameshkumar Sundaram
2021-11-12  8:01   ` Kalle Valo
2021-07-21 21:20 ` [PATCH 11/12] ath11k: Clear auth flag only for actual association in security mode Jouni Malinen
2021-07-21 21:20 ` [PATCH 12/12] ath11k: Change QCN9074 firmware to operate in mode-2 Jouni Malinen
2021-11-12  8:19   ` Kalle Valo
2021-12-08 12:39     ` Anilkumar Kolli
2021-09-28 10:58 ` [PATCH 01/12] ath11k: Fix pktlog lite rx events Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210721212029.142388-7-jouni@codeaurora.org \
    --to=jouni@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=srirrama@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).