[PATCH AUTOSEL 5.13 131/219] mac80211: Fix monitor MTU limit so that A-MSDUs get through

[PATCH AUTOSEL 5.13 131/219] mac80211: Fix monitor MTU limit so that A-MSDUs get through

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 79f5962baea74ce1cd4e5949598944bff854b166 ]

The maximum MTU was set to 2304, which is the maximum MSDU size. While
this is valid for normal WLAN interfaces, it is too low for monitor
interfaces. A monitor interface may receive and inject MPDU frames, and
the maximum MPDU frame size is larger than 2304. The MPDU may also
contain an A-MSDU frame, in which case the size may be much larger than
the MTU limit. Since the maximum size of an A-MSDU depends on the PHY
mode of the transmitting STA, it is not possible to set an exact MTU
limit for a monitor interface. Now the maximum MTU for a monitor
interface is unrestricted.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/r/20210628123246.2070558-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/iface.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 137fa4c50e07..8df7ab34911c 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1985,9 +1985,16 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 
 		netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
 
-		/* MTU range: 256 - 2304 */
+		/* MTU range is normally 256 - 2304, where the upper limit is
+		 * the maximum MSDU size. Monitor interfaces send and receive
+		 * MPDU and A-MSDU frames which may be much larger so we do
+		 * not impose an upper limit in that case.
+		 */
 		ndev->min_mtu = 256;
-		ndev->max_mtu = local->hw.max_mtu;
+		if (type == NL80211_IFTYPE_MONITOR)
+			ndev->max_mtu = 0;
+		else
+			ndev->max_mtu = local->hw.max_mtu;
 
 		ret = cfg80211_register_netdevice(ndev);
 		if (ret) {
-- 
2.30.2

[PATCH AUTOSEL 5.13 163/219] rtl8xxxu: Fix the handling of TX A-MPDU aggregation

[Sasha Levin]

From: Chris Chiu <chris.chiu@canonical.com>

[ Upstream commit 95a581ab3592082c60a08090aabe09ac7d0bd650 ]

The TX A-MPDU aggregation is not handled in the driver since the
ieee80211_start_tx_ba_session has never been started properly.
Start and stop the TX BA session by tracking the TX aggregation
status of each TID. Fix the ampdu_action and the tx descriptor
accordingly with the given TID.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210804151325.86600-1-chris.chiu@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  |  2 ++
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 33 ++++++++++++++-----
 2 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 01735776345a..7ddce3c3f0c4 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1378,6 +1378,8 @@ struct rtl8xxxu_priv {
 	u8 no_pape:1;
 	u8 int_buf[USB_INTR_CONTENT_LENGTH];
 	u8 rssi_level;
+	DECLARE_BITMAP(tx_aggr_started, IEEE80211_NUM_TIDS);
+	DECLARE_BITMAP(tid_tx_operational, IEEE80211_NUM_TIDS);
 	/*
 	 * Only one virtual interface permitted because only STA mode
 	 * is supported and no iface_combinations are provided.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 9ff09cf7eb62..ce8e2438f86b 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4805,6 +4805,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 	struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 	u32 rate;
 	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
@@ -4828,7 +4830,7 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 
 	tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
 
-	if (ampdu_enable)
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
 		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
 	else
 		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
@@ -4876,6 +4878,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
 	struct rtl8xxxu_txdesc40 *tx_desc40;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 	u32 rate;
 	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
@@ -4902,7 +4906,7 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 
 	tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
 
-	if (ampdu_enable)
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
 		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
 	else
 		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
@@ -5015,12 +5019,19 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 	if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
 		if (sta->ht_cap.ht_supported) {
 			u32 ampdu, val32;
+			u8 *qc = ieee80211_get_qos_ctl(hdr);
+			u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 
 			ampdu = (u32)sta->ht_cap.ampdu_density;
 			val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
 			tx_desc->txdw2 |= cpu_to_le32(val32);
 
 			ampdu_enable = true;
+
+			if (!test_bit(tid, priv->tx_aggr_started) &&
+			    !(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+				if (!ieee80211_start_tx_ba_session(sta, tid, 0))
+					set_bit(tid, priv->tx_aggr_started);
 		}
 	}
 
@@ -6089,6 +6100,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct device *dev = &priv->udev->dev;
 	u8 ampdu_factor, ampdu_density;
 	struct ieee80211_sta *sta = params->sta;
+	u16 tid = params->tid;
 	enum ieee80211_ampdu_mlme_action action = params->action;
 
 	switch (action) {
@@ -6101,17 +6113,20 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		dev_dbg(dev,
 			"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
 			ampdu_factor, ampdu_density);
-		break;
+		return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
-		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
-		rtl8xxxu_set_ampdu_factor(priv, 0);
-		rtl8xxxu_set_ampdu_min_space(priv, 0);
-		break;
 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
-		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
-			 __func__);
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
 		rtl8xxxu_set_ampdu_factor(priv, 0);
 		rtl8xxxu_set_ampdu_min_space(priv, 0);
+		clear_bit(tid, priv->tx_aggr_started);
+		clear_bit(tid, priv->tid_tx_operational);
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+		set_bit(tid, priv->tid_tx_operational);
 		break;
 	case IEEE80211_AMPDU_RX_START:
 		dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
-- 
2.30.2

[PATCH AUTOSEL 5.13 164/219] rtw88: use read_poll_timeout instead of fixed sleep

[Sasha Levin]

From: Chin-Yen Lee <timlee@realtek.com>

[ Upstream commit 02a55c0009a55b204e1e5c17295431f0a9e7d3b6 ]

In current wow flow, driver calls rtw_wow_fw_start and sleep for 100ms,
to wait firmware finish preliminary work and then update the value of
WOWLAN_WAKE_REASON register to zero. But later firmware will start wow
function with power-saving mode, in which mode the value of
WOWLAN_WAKE_REASON register is 0xea. So driver may get 0xea value and
return fail. We use read_poll_timeout instead to check the value to avoid
this issue.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210728014335.8785-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/wow.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/wow.c b/drivers/net/wireless/realtek/rtw88/wow.c
index fc9544f4e5e4..bdccfa70dddc 100644
--- a/drivers/net/wireless/realtek/rtw88/wow.c
+++ b/drivers/net/wireless/realtek/rtw88/wow.c
@@ -283,15 +283,26 @@ static void rtw_wow_rx_dma_start(struct rtw_dev *rtwdev)
 
 static int rtw_wow_check_fw_status(struct rtw_dev *rtwdev, bool wow_enable)
 {
-	/* wait 100ms for wow firmware to finish work */
-	msleep(100);
+	int ret;
+	u8 check;
+	u32 check_dis;
 
 	if (wow_enable) {
-		if (rtw_read8(rtwdev, REG_WOWLAN_WAKE_REASON))
+		ret = read_poll_timeout(rtw_read8, check, !check, 1000,
+					100000, true, rtwdev,
+					REG_WOWLAN_WAKE_REASON);
+		if (ret)
 			goto wow_fail;
 	} else {
-		if (rtw_read32_mask(rtwdev, REG_FE1IMR, BIT_FS_RXDONE) ||
-		    rtw_read32_mask(rtwdev, REG_RXPKT_NUM, BIT_RW_RELEASE))
+		ret = read_poll_timeout(rtw_read32_mask, check_dis,
+					!check_dis, 1000, 100000, true, rtwdev,
+					REG_FE1IMR, BIT_FS_RXDONE);
+		if (ret)
+			goto wow_fail;
+		ret = read_poll_timeout(rtw_read32_mask, check_dis,
+					!check_dis, 1000, 100000, false, rtwdev,
+					REG_RXPKT_NUM, BIT_RW_RELEASE);
+		if (ret)
 			goto wow_fail;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 165/219] rtw88: wow: build wow function only if CONFIG_PM is on

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 05e45887382c4c0f9522515759b34991aa17e69d ]

The kernel test robot reports undefined reference after we report wakeup
reason to mac80211. This is because CONFIG_PM is not defined in the testing
configuration file. In fact, functions within wow.c are used if CONFIG_PM
is defined, so use CONFIG_PM to decide whether we build this file or not.

The reported messages are:
   hppa-linux-ld: drivers/net/wireless/realtek/rtw88/wow.o: in function `rtw_wow_show_wakeup_reason':
>> (.text+0x6c4): undefined reference to `ieee80211_report_wowlan_wakeup'
>> hppa-linux-ld: (.text+0x6e0): undefined reference to `ieee80211_report_wowlan_wakeup'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210728014335.8785-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile
index c0e4b111c8b4..73d6807a8cdf 100644
--- a/drivers/net/wireless/realtek/rtw88/Makefile
+++ b/drivers/net/wireless/realtek/rtw88/Makefile
@@ -15,9 +15,9 @@ rtw88_core-y += main.o \
 	   ps.o \
 	   sec.o \
 	   bf.o \
-	   wow.o \
 	   regd.o
 
+rtw88_core-$(CONFIG_PM) += wow.o
 
 obj-$(CONFIG_RTW88_8822B)	+= rtw88_8822b.o
 rtw88_8822b-objs		:= rtw8822b.o rtw8822b_table.o
-- 
2.30.2

[PATCH AUTOSEL 5.13 166/219] rtw88: wow: fix size access error of probe request

[Sasha Levin]

From: Chin-Yen Lee <timlee@realtek.com>

[ Upstream commit 69c7044526d984df672b8d9b6d6998c34617cde4 ]

Current flow will lead to null ptr access because of trying
to get the size of freed probe-request packets. We store the
information of packet size into rsvd page instead and also fix
the size error issue, which will cause unstable behavoir of
sending probe request by wow firmware.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210728014335.8785-6-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/fw.c | 8 ++++++--
 drivers/net/wireless/realtek/rtw88/fw.h | 1 +
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index ea2cd4db1d3c..ce57932e38a4 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -715,7 +715,7 @@ static u16 rtw_get_rsvd_page_probe_req_size(struct rtw_dev *rtwdev,
 			continue;
 		if ((!ssid && !rsvd_pkt->ssid) ||
 		    rtw_ssid_equal(rsvd_pkt->ssid, ssid))
-			size = rsvd_pkt->skb->len;
+			size = rsvd_pkt->probe_req_size;
 	}
 
 	return size;
@@ -943,6 +943,8 @@ static struct sk_buff *rtw_get_rsvd_page_skb(struct ieee80211_hw *hw,
 							 ssid->ssid_len, 0);
 		else
 			skb_new = ieee80211_probereq_get(hw, vif->addr, NULL, 0, 0);
+		if (skb_new)
+			rsvd_pkt->probe_req_size = (u16)skb_new->len;
 		break;
 	case RSVD_NLO_INFO:
 		skb_new = rtw_nlo_info_get(hw);
@@ -1539,6 +1541,7 @@ int rtw_fw_dump_fifo(struct rtw_dev *rtwdev, u8 fifo_sel, u32 addr, u32 size,
 static void __rtw_fw_update_pkt(struct rtw_dev *rtwdev, u8 pkt_id, u16 size,
 				u8 location)
 {
+	struct rtw_chip_info *chip = rtwdev->chip;
 	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
 	u16 total_size = H2C_PKT_HDR_SIZE + H2C_PKT_UPDATE_PKT_LEN;
 
@@ -1549,6 +1552,7 @@ static void __rtw_fw_update_pkt(struct rtw_dev *rtwdev, u8 pkt_id, u16 size,
 	UPDATE_PKT_SET_LOCATION(h2c_pkt, location);
 
 	/* include txdesc size */
+	size += chip->tx_pkt_desc_sz;
 	UPDATE_PKT_SET_SIZE(h2c_pkt, size);
 
 	rtw_fw_send_h2c_packet(rtwdev, h2c_pkt);
@@ -1558,7 +1562,7 @@ void rtw_fw_update_pkt_probe_req(struct rtw_dev *rtwdev,
 				 struct cfg80211_ssid *ssid)
 {
 	u8 loc;
-	u32 size;
+	u16 size;
 
 	loc = rtw_get_rsvd_page_probe_req_location(rtwdev, ssid);
 	if (!loc) {
diff --git a/drivers/net/wireless/realtek/rtw88/fw.h b/drivers/net/wireless/realtek/rtw88/fw.h
index 7c5b1d75e26f..35bc9e10dcba 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.h
+++ b/drivers/net/wireless/realtek/rtw88/fw.h
@@ -126,6 +126,7 @@ struct rtw_rsvd_page {
 	u8 page;
 	bool add_txdesc;
 	struct cfg80211_ssid *ssid;
+	u16 probe_req_size;
 };
 
 enum rtw_keep_alive_pkt_type {
-- 
2.30.2

[PATCH AUTOSEL 5.13 201/219] iwlwifi: pcie: free RBs during configure

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6ac5720086c8b176794eb74c5cc09f8b79017f38 ]

When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.

Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c    | 5 ++++-
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index fb8491412be4..586c4104edf2 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -487,6 +487,9 @@ void iwl_pcie_free_rbs_pool(struct iwl_trans *trans)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	int i;
 
+	if (!trans_pcie->rx_pool)
+		return;
+
 	for (i = 0; i < RX_POOL_SIZE(trans_pcie->num_rx_bufs); i++) {
 		if (!trans_pcie->rx_pool[i].page)
 			continue;
@@ -1093,7 +1096,7 @@ static int _iwl_pcie_rx_init(struct iwl_trans *trans)
 	INIT_LIST_HEAD(&rba->rbd_empty);
 	spin_unlock_bh(&rba->lock);
 
-	/* free all first - we might be reconfigured for a different size */
+	/* free all first - we overwrite everything here */
 	iwl_pcie_free_rbs_pool(trans);
 
 	for (i = 0; i < RX_QUEUE_SIZE; i++)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 239bc177a3e5..a7a495dbf64d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1866,6 +1866,9 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
+	/* free all first - we might be reconfigured for a different size */
+	iwl_pcie_free_rbs_pool(trans);
+
 	trans->txqs.cmd.q_id = trans_cfg->cmd_queue;
 	trans->txqs.cmd.fifo = trans_cfg->cmd_fifo;
 	trans->txqs.cmd.wdg_timeout = trans_cfg->cmd_q_wdg_timeout;
-- 
2.30.2

[PATCH AUTOSEL 5.13 202/219] iwlwifi: mvm: Do not use full SSIDs in 6GHz scan

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit deedf9b97cd4ef45da476c9bdd2a5f3276053956 ]

The scan request processing populated the direct SSIDs
in the FW scan request command also for 6GHz scan, which is not
needed and might result in unexpected behavior.

Fix the code to add the direct SSIDs only in case the scan
is not a 6GHz scan.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 5a0696c44f6d..3627de2af344 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -2368,14 +2368,17 @@ static int iwl_mvm_scan_umac_v14(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	if (ret)
 		return ret;
 
-	iwl_mvm_scan_umac_fill_probe_p_v4(params, &scan_p->probe_params,
-					  &bitmap_ssid);
 	if (!params->scan_6ghz) {
+		iwl_mvm_scan_umac_fill_probe_p_v4(params, &scan_p->probe_params,
+					  &bitmap_ssid);
 		iwl_mvm_scan_umac_fill_ch_p_v6(mvm, params, vif,
-					       &scan_p->channel_params, bitmap_ssid);
+				       &scan_p->channel_params, bitmap_ssid);
 
 		return 0;
+	} else {
+		pb->preq = params->preq;
 	}
+
 	cp->flags = iwl_mvm_scan_umac_chan_flags_v2(mvm, params, vif);
 	cp->n_aps_override[0] = IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY;
 	cp->n_aps_override[1] = IWL_SCAN_ADWELL_N_APS_SOCIAL_CHS;
-- 
2.30.2

[PATCH AUTOSEL 5.13 203/219] iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changed

[Sasha Levin]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ]

If beacon_inject_active is true, we will return without freeing
beacon.  Fid that by freeing it before returning.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
index fd5e08961651..7f0c82189808 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
@@ -1005,8 +1005,10 @@ int iwl_mvm_mac_ctxt_beacon_changed(struct iwl_mvm *mvm,
 		return -ENOMEM;
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (mvm->beacon_inject_active)
+	if (mvm->beacon_inject_active) {
+		dev_kfree_skb(beacon);
 		return -EBUSY;
+	}
 #endif
 
 	ret = iwl_mvm_mac_ctxt_send_beacon(mvm, vif, beacon);
-- 
2.30.2

[PATCH AUTOSEL 5.13 204/219] iwlwifi: mvm: avoid static queue number aliasing

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ]

When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
 * IWL_MVM_DQA_AUX_QUEUE == 1,
 * both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
   IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
 * IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.

Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.

However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.

Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.

This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.

Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 24 +++++++++++++---
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 30 ++++++++++++--------
 2 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index ebed82c590e5..31611542e1aa 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -754,10 +754,26 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 	mvm->fw_restart = iwlwifi_mod_params.fw_restart ? -1 : 0;
 
-	mvm->aux_queue = IWL_MVM_DQA_AUX_QUEUE;
-	mvm->snif_queue = IWL_MVM_DQA_INJECT_MONITOR_QUEUE;
-	mvm->probe_queue = IWL_MVM_DQA_AP_PROBE_RESP_QUEUE;
-	mvm->p2p_dev_queue = IWL_MVM_DQA_P2P_DEVICE_QUEUE;
+	if (iwl_mvm_has_new_tx_api(mvm)) {
+		/*
+		 * If we have the new TX/queue allocation API initialize them
+		 * all to invalid numbers. We'll rewrite the ones that we need
+		 * later, but that doesn't happen for all of them all of the
+		 * time (e.g. P2P Device is optional), and if a dynamic queue
+		 * ends up getting number 2 (IWL_MVM_DQA_P2P_DEVICE_QUEUE) then
+		 * iwl_mvm_is_static_queue() erroneously returns true, and we
+		 * might have things getting stuck.
+		 */
+		mvm->aux_queue = IWL_MVM_INVALID_QUEUE;
+		mvm->snif_queue = IWL_MVM_INVALID_QUEUE;
+		mvm->probe_queue = IWL_MVM_INVALID_QUEUE;
+		mvm->p2p_dev_queue = IWL_MVM_INVALID_QUEUE;
+	} else {
+		mvm->aux_queue = IWL_MVM_DQA_AUX_QUEUE;
+		mvm->snif_queue = IWL_MVM_DQA_INJECT_MONITOR_QUEUE;
+		mvm->probe_queue = IWL_MVM_DQA_AP_PROBE_RESP_QUEUE;
+		mvm->p2p_dev_queue = IWL_MVM_DQA_P2P_DEVICE_QUEUE;
+	}
 
 	mvm->sf_state = SF_UNINIT;
 	if (iwl_mvm_has_unified_ucode(mvm))
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
index f618368eda83..c310c366c38e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -316,8 +316,9 @@ static int iwl_mvm_invalidate_sta_queue(struct iwl_mvm *mvm, int queue,
 }
 
 static int iwl_mvm_disable_txq(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
-			       int queue, u8 tid, u8 flags)
+			       u16 *queueptr, u8 tid, u8 flags)
 {
+	int queue = *queueptr;
 	struct iwl_scd_txq_cfg_cmd cmd = {
 		.scd_queue = queue,
 		.action = SCD_CFG_DISABLE_QUEUE,
@@ -326,6 +327,7 @@ static int iwl_mvm_disable_txq(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 
 	if (iwl_mvm_has_new_tx_api(mvm)) {
 		iwl_trans_txq_free(mvm->trans, queue);
+		*queueptr = IWL_MVM_INVALID_QUEUE;
 
 		return 0;
 	}
@@ -487,6 +489,7 @@ static int iwl_mvm_free_inactive_queue(struct iwl_mvm *mvm, int queue,
 	u8 sta_id, tid;
 	unsigned long disable_agg_tids = 0;
 	bool same_sta;
+	u16 queue_tmp = queue;
 	int ret;
 
 	lockdep_assert_held(&mvm->mutex);
@@ -509,7 +512,7 @@ static int iwl_mvm_free_inactive_queue(struct iwl_mvm *mvm, int queue,
 		iwl_mvm_invalidate_sta_queue(mvm, queue,
 					     disable_agg_tids, false);
 
-	ret = iwl_mvm_disable_txq(mvm, old_sta, queue, tid, 0);
+	ret = iwl_mvm_disable_txq(mvm, old_sta, &queue_tmp, tid, 0);
 	if (ret) {
 		IWL_ERR(mvm,
 			"Failed to free inactive queue %d (ret=%d)\n",
@@ -1184,6 +1187,7 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm,
 	unsigned int wdg_timeout =
 		iwl_mvm_get_wd_timeout(mvm, mvmsta->vif, false, false);
 	int queue = -1;
+	u16 queue_tmp;
 	unsigned long disable_agg_tids = 0;
 	enum iwl_mvm_agg_state queue_state;
 	bool shared_queue = false, inc_ssn;
@@ -1332,7 +1336,8 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm,
 	return 0;
 
 out_err:
-	iwl_mvm_disable_txq(mvm, sta, queue, tid, 0);
+	queue_tmp = queue;
+	iwl_mvm_disable_txq(mvm, sta, &queue_tmp, tid, 0);
 
 	return ret;
 }
@@ -1779,7 +1784,7 @@ static void iwl_mvm_disable_sta_queues(struct iwl_mvm *mvm,
 		if (mvm_sta->tid_data[i].txq_id == IWL_MVM_INVALID_QUEUE)
 			continue;
 
-		iwl_mvm_disable_txq(mvm, sta, mvm_sta->tid_data[i].txq_id, i,
+		iwl_mvm_disable_txq(mvm, sta, &mvm_sta->tid_data[i].txq_id, i,
 				    0);
 		mvm_sta->tid_data[i].txq_id = IWL_MVM_INVALID_QUEUE;
 	}
@@ -1987,7 +1992,7 @@ static int iwl_mvm_add_int_sta_with_queue(struct iwl_mvm *mvm, int macidx,
 	ret = iwl_mvm_add_int_sta_common(mvm, sta, addr, macidx, maccolor);
 	if (ret) {
 		if (!iwl_mvm_has_new_tx_api(mvm))
-			iwl_mvm_disable_txq(mvm, NULL, *queue,
+			iwl_mvm_disable_txq(mvm, NULL, queue,
 					    IWL_MAX_TID_COUNT, 0);
 		return ret;
 	}
@@ -2060,7 +2065,7 @@ int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	if (WARN_ON_ONCE(mvm->snif_sta.sta_id == IWL_MVM_INVALID_STA))
 		return -EINVAL;
 
-	iwl_mvm_disable_txq(mvm, NULL, mvm->snif_queue, IWL_MAX_TID_COUNT, 0);
+	iwl_mvm_disable_txq(mvm, NULL, &mvm->snif_queue, IWL_MAX_TID_COUNT, 0);
 	ret = iwl_mvm_rm_sta_common(mvm, mvm->snif_sta.sta_id);
 	if (ret)
 		IWL_WARN(mvm, "Failed sending remove station\n");
@@ -2077,7 +2082,7 @@ int iwl_mvm_rm_aux_sta(struct iwl_mvm *mvm)
 	if (WARN_ON_ONCE(mvm->aux_sta.sta_id == IWL_MVM_INVALID_STA))
 		return -EINVAL;
 
-	iwl_mvm_disable_txq(mvm, NULL, mvm->aux_queue, IWL_MAX_TID_COUNT, 0);
+	iwl_mvm_disable_txq(mvm, NULL, &mvm->aux_queue, IWL_MAX_TID_COUNT, 0);
 	ret = iwl_mvm_rm_sta_common(mvm, mvm->aux_sta.sta_id);
 	if (ret)
 		IWL_WARN(mvm, "Failed sending remove station\n");
@@ -2173,7 +2178,7 @@ static void iwl_mvm_free_bcast_sta_queues(struct iwl_mvm *mvm,
 					  struct ieee80211_vif *vif)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
-	int queue;
+	u16 *queueptr, queue;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -2182,10 +2187,10 @@ static void iwl_mvm_free_bcast_sta_queues(struct iwl_mvm *mvm,
 	switch (vif->type) {
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_ADHOC:
-		queue = mvm->probe_queue;
+		queueptr = &mvm->probe_queue;
 		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
-		queue = mvm->p2p_dev_queue;
+		queueptr = &mvm->p2p_dev_queue;
 		break;
 	default:
 		WARN(1, "Can't free bcast queue on vif type %d\n",
@@ -2193,7 +2198,8 @@ static void iwl_mvm_free_bcast_sta_queues(struct iwl_mvm *mvm,
 		return;
 	}
 
-	iwl_mvm_disable_txq(mvm, NULL, queue, IWL_MAX_TID_COUNT, 0);
+	queue = *queueptr;
+	iwl_mvm_disable_txq(mvm, NULL, queueptr, IWL_MAX_TID_COUNT, 0);
 	if (iwl_mvm_has_new_tx_api(mvm))
 		return;
 
@@ -2428,7 +2434,7 @@ int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 
 	iwl_mvm_flush_sta(mvm, &mvmvif->mcast_sta, true);
 
-	iwl_mvm_disable_txq(mvm, NULL, mvmvif->cab_queue, 0, 0);
+	iwl_mvm_disable_txq(mvm, NULL, &mvmvif->cab_queue, 0, 0);
 
 	ret = iwl_mvm_rm_sta_common(mvm, mvmvif->mcast_sta.sta_id);
 	if (ret)
-- 
2.30.2

[PATCH AUTOSEL 5.13 205/219] iwlwifi: mvm: Fix umac scan request probe parameters

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 35fc5feca7b24b97e828e6e6a4243b4b9b0131f8 ]

Both 'iwl_scan_probe_params_v3' and 'iwl_scan_probe_params_v4'
wrongly addressed the 'bssid_array' field which should supposed
to be any array of BSSIDs each of size ETH_ALEN and not the
opposite. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.04146f24794f.I90726440ddff75013e9fecbe9fa1a05c69e3f17b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/scan.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
index b2605aefc290..8b200379f7c2 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
- * Copyright (C) 2012-2014, 2018-2020 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
  * Copyright (C) 2016-2017 Intel Deutschland GmbH
  */
@@ -874,7 +874,7 @@ struct iwl_scan_probe_params_v3 {
 	u8 reserved;
 	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
 	__le32 short_ssid[SCAN_SHORT_SSID_MAX_SIZE];
-	u8 bssid_array[ETH_ALEN][SCAN_BSSID_MAX_SIZE];
+	u8 bssid_array[SCAN_BSSID_MAX_SIZE][ETH_ALEN];
 } __packed; /* SCAN_PROBE_PARAMS_API_S_VER_3 */
 
 /**
@@ -894,7 +894,7 @@ struct iwl_scan_probe_params_v4 {
 	__le16 reserved;
 	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
 	__le32 short_ssid[SCAN_SHORT_SSID_MAX_SIZE];
-	u8 bssid_array[ETH_ALEN][SCAN_BSSID_MAX_SIZE];
+	u8 bssid_array[SCAN_BSSID_MAX_SIZE][ETH_ALEN];
 } __packed; /* SCAN_PROBE_PARAMS_API_S_VER_4 */
 
 #define SCAN_MAX_NUM_CHANS_V3 67
-- 
2.30.2

[PATCH AUTOSEL 5.13 206/219] iwlwifi: mvm: fix access to BSS elements

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ]

BSS elements are protected using RCU, so we need to use
RCU properly to access them, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 141d9fc299b0..6981608ef165 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2987,16 +2987,20 @@ static void iwl_mvm_check_he_obss_narrow_bw_ru_iter(struct wiphy *wiphy,
 						    void *_data)
 {
 	struct iwl_mvm_he_obss_narrow_bw_ru_data *data = _data;
+	const struct cfg80211_bss_ies *ies;
 	const struct element *elem;
 
-	elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, bss->ies->data,
-				  bss->ies->len);
+	rcu_read_lock();
+	ies = rcu_dereference(bss->ies);
+	elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, ies->data,
+				  ies->len);
 
 	if (!elem || elem->datalen < 10 ||
 	    !(elem->data[10] &
 	      WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT)) {
 		data->tolerated = false;
 	}
+	rcu_read_unlock();
 }
 
 static void iwl_mvm_check_he_obss_narrow_bw_ru(struct ieee80211_hw *hw,
-- 
2.30.2

[PATCH AUTOSEL 5.13 207/219] iwlwifi: fw: correctly limit to monitor dump

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit e6344c060209ef4e970cac18adeac1676a2a73cd ]

In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index cc4e18ca9566..a27849419d29 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -2314,7 +2314,7 @@ static void iwl_fw_error_dump(struct iwl_fw_runtime *fwrt,
 		return;
 
 	if (dump_data->monitor_only)
-		dump_mask &= IWL_FW_ERROR_DUMP_FW_MONITOR;
+		dump_mask &= BIT(IWL_FW_ERROR_DUMP_FW_MONITOR);
 
 	fw_error_dump.trans_ptr = iwl_trans_dump_data(fwrt->trans, dump_mask);
 	file_len = le32_to_cpu(dump_file->file_len);
-- 
2.30.2

[PATCH AUTOSEL 5.13 208/219] iwlwifi: mvm: Fix scan channel flags settings

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 090f1be3abf3069ef856b29761f181808bf55917 ]

The iwl_mvm_scan_ch_n_aps_flag() is called with a variable
before the value of the variable is set. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 3627de2af344..ee3aff8bf7c2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1648,7 +1648,7 @@ iwl_mvm_umac_scan_cfg_channels_v6(struct iwl_mvm *mvm,
 		struct iwl_scan_channel_cfg_umac *cfg = &cp->channel_config[i];
 		u32 n_aps_flag =
 			iwl_mvm_scan_ch_n_aps_flag(vif_type,
-						   cfg->v2.channel_num);
+						   channels[i]->hw_value);
 
 		cfg->flags = cpu_to_le32(flags | n_aps_flag);
 		cfg->v2.channel_num = channels[i]->hw_value;
-- 
2.30.2

[PATCH AUTOSEL 5.13 213/219] wcn36xx: Fix missing frame timestamp for beacon/probe-resp

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 8678fd31f2d3eb14f2b8b39c9bc266f16fa24b22 ]

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)

This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/txrx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 1b831157ede1..cab196bb38cd 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -287,6 +287,10 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 		status.rate_idx = 0;
 	}
 
+	if (ieee80211_is_beacon(hdr->frame_control) ||
+	    ieee80211_is_probe_resp(hdr->frame_control))
+		status.boottime_ns = ktime_get_boottime_ns();
+
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 
 	if (ieee80211_is_beacon(hdr->frame_control)) {
-- 
2.30.2

[PATCH AUTOSEL 5.13 214/219] ath9k: fix OOB read ar9300_eeprom_restore_internal

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index b4885a700296..b0a4ca3559fd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3351,7 +3351,8 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 			"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
 			cptr, code, reference, length, major, minor);
 		if ((!AR_SREV_9485(ah) && length >= 1024) ||
-		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485) ||
+		    (length > cptr)) {
 			ath_dbg(common, EEPROM, "Skipping bad header\n");
 			cptr -= COMP_HDR_LEN;
 			continue;
-- 
2.30.2

[PATCH AUTOSEL 5.13 215/219] ath9k: fix sleeping in atomic context

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]

The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:

--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
   --> ath9k_hw_reset()
      --> ath9k_hw_gpio_request_in()
         --> ath9k_hw_gpio_request()
            --> ath9k_hw_gpio_cfg_soc()

Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.

Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hw.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2ca3b86714a9..172081ffe477 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1621,7 +1621,6 @@ static void ath9k_hw_apply_gpio_override(struct ath_hw *ah)
 		ath9k_hw_gpio_request_out(ah, i, NULL,
 					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 		ath9k_hw_set_gpio(ah, i, !!(ah->gpio_val & BIT(i)));
-		ath9k_hw_gpio_free(ah, i);
 	}
 }
 
@@ -2728,14 +2727,17 @@ static void ath9k_hw_gpio_cfg_output_mux(struct ath_hw *ah, u32 gpio, u32 type)
 static void ath9k_hw_gpio_cfg_soc(struct ath_hw *ah, u32 gpio, bool out,
 				  const char *label)
 {
+	int err;
+
 	if (ah->caps.gpio_requested & BIT(gpio))
 		return;
 
-	/* may be requested by BSP, free anyway */
-	gpio_free(gpio);
-
-	if (gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label))
+	err = gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label);
+	if (err) {
+		ath_err(ath9k_hw_common(ah), "request GPIO%d failed:%d\n",
+			gpio, err);
 		return;
+	}
 
 	ah->caps.gpio_requested |= BIT(gpio);
 }
-- 
2.30.2