[PATCH] ath5k: switch to rate table based lookup

[Jonas Jelonek <jelonek.jonas@gmail.com>]

Switching from legacy usage of ieee80211_get_tx_rates() lookup to direct
rate table lookup in struct ieee80211_sta->rates.

The current rate control API allows drivers to directly get rates from
ieee80211_sta->rates. ath5k is currently one of the legacy drivers that
perform translation/merge with the internal rate table via
ieee80211_get_tx_rates provided by rate control API.
For our upcoming changes to rate control API and the implementation of
transmit power control, this patch changes the behaviour. The call to
ieee80211_get_tx_rates and subsequent calls are also avoided. ath5k now
directly reads rates from sta->rates into its internal rate table. Cause
ath5k does not rely on the rate array in SKB->CB, this is not considered
anymore except for the first entry (used for probing).

Tested this on a PCEngines ALIX with CMP9-GP miniPCI wifi card (Atheros
AR5213A). Generated traffic between AP and multiple STAs before and
after applying the patch and simultaneously measured throughput and
captured rc_stats. Comparison resulted in same rate selection and no
performance loss between both runs.

Co-developed-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
---
 drivers/net/wireless/ath/ath5k/base.c | 44 +++++++++++++++++++++++++--
 1 file changed, 42 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index cef17f33c69e..647b3b76495c 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -727,6 +727,43 @@ ath5k_get_rate_hw_value(const struct ieee80211_hw *hw,
 	return hw_rate;
 }
 
+static bool ath5k_merge_ratetbl(struct ieee80211_sta *sta,
+				struct ath5k_buf *bf,
+				struct ieee80211_tx_info *tx_info)
+{
+	struct ieee80211_sta_rates *ratetbl;
+	u8 i;
+
+	if (!sta)
+		return false;
+
+	ratetbl = rcu_dereference(sta->rates);
+	if (!ratetbl)
+		return false;
+
+	if (tx_info->control.rates[0].idx < 0 ||
+	    tx_info->control.rates[0].count == 0)
+	{
+		i = 0;
+	} else {
+		bf->rates[0] = tx_info->control.rates[0];
+		i = 1;
+	}
+
+	for ( ; i < IEEE80211_TX_MAX_RATES; i++) {
+		bf->rates[i].idx = ratetbl->rate[i].idx;
+		bf->rates[i].flags = ratetbl->rate[i].flags;
+		if (tx_info->control.use_rts)
+			bf->rates[i].count = ratetbl->rate[i].count_rts;
+		else if (tx_info->control.use_cts_prot)
+			bf->rates[i].count = ratetbl->rate[i].count_cts;
+		else
+			bf->rates[i].count = ratetbl->rate[i].count;
+	}
+
+	return true;
+}
+
 static int
 ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 		  struct ath5k_txq *txq, int padsize,
@@ -753,8 +790,11 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
 	if (dma_mapping_error(ah->dev, bf->skbaddr))
 		return -ENOSPC;
 
-	ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates,
-			       ARRAY_SIZE(bf->rates));
+	if (!ath5k_merge_ratetbl((control) ? control->sta : NULL, bf, info)) {
+		ieee80211_get_tx_rates(info->control.vif,
+			(control) ? control->sta : NULL, skb, bf->rates,
+			ARRAY_SIZE(bf->rates));
+	}
 
 	rate = ath5k_get_rate(ah->hw, info, bf, 0);
 
-- 
2.30.2