From: Jonas Jelonek <jelonek.jonas@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: kvalo@kernel.org, nbd@nbd.name, johannes@sipsolutions.net,
Jonas Jelonek <jelonek.jonas@gmail.com>
Subject: [PATCH v2 1/2] mac80211: extend current rate control tx status API
Date: Wed, 9 Mar 2022 20:57:58 +0100 [thread overview]
Message-ID: <20220309195759.1494-2-jelonek.jonas@gmail.com> (raw)
In-Reply-To: <20220309195759.1494-1-jelonek.jonas@gmail.com>
This patch adds the new struct ieee80211_rate_status and replaces
'struct rate_info *rate' in ieee80211_tx_status with pointer and length
annotation.
The struct ieee80211_rate_status allows to:
(1) receive tx power status feedback for transmit power control (TPC)
per packet or packet retry
(2) dynamic mapping of wifi chip specific multi-rate retry (mrr)
chains with different lengths
(3) increase the limit of annotatable rate indices to support
IEEE802.11ac rate sets and beyond
ieee80211_tx_info, control and status buffer, and ieee80211_tx_rate
cannot be used to achieve these goals due to fixed size limitations.
Our new struct contains a struct rate_info to annotate the rate that was
used, retry count of the rate and tx power. It is intended for all
information related to RC and TPC that needs to be passed from driver to
mac80211 and its RC/TPC algorithms like Minstrel_HT. It corresponds to
one stage in an mrr. Multiple subsequent instances of this struct can be
included in struct ieee80211_tx_status via a pointer and a length variable.
Those instances can be allocated on-stack. The former reference to a single
instance of struct rate_info is replaced with our new annotation.
Further mandatory changes in status.c and mt76 driver due to the
removal of 'struct rate_info *rate' are also included.
status.c already uses the information in ieee80211_tx_status->rate in
radiotap, this is now changed to use ieee80211_rate_status->rate_idx.
mt76 driver already uses struct rate_info to pass the tx rate to status
path. It is now enclosed in an instance of struct ieee80211_rate_status
with default values for retry_count and tx_power. The latter should be
adjusted later to pass more accurate values.
Compile-Tested: current wireless-next tree with all flags on
Tested-on: Xiaomi 4A Gigabit (MediaTek MT7603E, MT7612E) with OpenWrt
Linux 5.10.83
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
---
drivers/net/wireless/mediatek/mt76/tx.c | 13 +++-
include/net/mac80211.h | 10 ++-
net/mac80211/status.c | 91 ++++++++++++++-----------
3 files changed, 71 insertions(+), 43 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index 6b8c9dc80542..ed3f3654999f 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -62,13 +62,20 @@ mt76_tx_status_unlock(struct mt76_dev *dev, struct sk_buff_head *list)
};
struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb);
struct mt76_wcid *wcid;
+ struct ieee80211_rate_status rate = {0};
wcid = rcu_dereference(dev->wcid[cb->wcid]);
if (wcid) {
status.sta = wcid_to_sta(wcid);
-
- if (status.sta)
- status.rate = &wcid->rate;
+ if (status.sta) {
+ rate.rate_idx = wcid->rate;
+ rate.retry_count = 1;
+ /* Default 0 for now, can be used by TPC algorithm */
+ rate.tx_power = 0;
+
+ status.rates = &rate;
+ status.n_rates = 1;
+ }
}
hw = mt76_tx_status_get_hw(dev, skb);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c50221d7e82c..1e98ed04b446 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1131,6 +1131,12 @@ ieee80211_info_get_tx_time_est(struct ieee80211_tx_info *info)
return info->tx_time_est << 2;
}
+struct ieee80211_rate_status {
+ struct rate_info rate_idx;
+ u8 retry_count;
+ s8 tx_power;
+};
+
/**
* struct ieee80211_tx_status - extended tx status info for rate control
*
@@ -1144,7 +1150,9 @@ struct ieee80211_tx_status {
struct ieee80211_sta *sta;
struct ieee80211_tx_info *info;
struct sk_buff *skb;
- struct rate_info *rate;
+ struct ieee80211_rate_status *rates;
+ u8 n_rates;
+
struct list_head *free_list;
};
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index f6f63a0b1b72..23c4c35182a5 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -246,15 +246,19 @@ static void ieee80211_set_bar_pending(struct sta_info *sta, u8 tid, u16 ssn)
static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info,
struct ieee80211_tx_status *status)
{
+ struct ieee80211_rate_status *status_rate = NULL;
int len = sizeof(struct ieee80211_radiotap_header);
+ if (status && status->rates)
+ status_rate = &status->rates[status->n_rates - 1];
+
/* IEEE80211_RADIOTAP_RATE rate */
- if (status && status->rate && !(status->rate->flags &
- (RATE_INFO_FLAGS_MCS |
- RATE_INFO_FLAGS_DMG |
- RATE_INFO_FLAGS_EDMG |
- RATE_INFO_FLAGS_VHT_MCS |
- RATE_INFO_FLAGS_HE_MCS)))
+ if (status_rate && !(status_rate->rate_idx.flags &
+ (RATE_INFO_FLAGS_MCS |
+ RATE_INFO_FLAGS_DMG |
+ RATE_INFO_FLAGS_EDMG |
+ RATE_INFO_FLAGS_VHT_MCS |
+ RATE_INFO_FLAGS_HE_MCS)))
len += 2;
else if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags &
@@ -269,12 +273,12 @@ static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info,
/* IEEE80211_RADIOTAP_MCS
* IEEE80211_RADIOTAP_VHT */
- if (status && status->rate) {
- if (status->rate->flags & RATE_INFO_FLAGS_MCS)
+ if (status_rate) {
+ if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_MCS)
len += 3;
- else if (status->rate->flags & RATE_INFO_FLAGS_VHT_MCS)
+ else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_VHT_MCS)
len = ALIGN(len, 2) + 12;
- else if (status->rate->flags & RATE_INFO_FLAGS_HE_MCS)
+ else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_HE_MCS)
len = ALIGN(len, 2) + 12;
} else if (info->status.rates[0].idx >= 0) {
if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS)
@@ -296,10 +300,14 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_radiotap_header *rthdr;
+ struct ieee80211_rate_status *status_rate = NULL;
unsigned char *pos;
u16 legacy_rate = 0;
u16 txflags;
+ if (status && status->rates)
+ status_rate = &status->rates[status->n_rates - 1];
+
rthdr = skb_push(skb, rtap_len);
memset(rthdr, 0, rtap_len);
@@ -317,13 +325,14 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
/* IEEE80211_RADIOTAP_RATE */
- if (status && status->rate) {
- if (!(status->rate->flags & (RATE_INFO_FLAGS_MCS |
- RATE_INFO_FLAGS_DMG |
- RATE_INFO_FLAGS_EDMG |
- RATE_INFO_FLAGS_VHT_MCS |
- RATE_INFO_FLAGS_HE_MCS)))
- legacy_rate = status->rate->legacy;
+ if (status_rate) {
+ if (!(status_rate->rate_idx.flags &
+ (RATE_INFO_FLAGS_MCS |
+ RATE_INFO_FLAGS_DMG |
+ RATE_INFO_FLAGS_EDMG |
+ RATE_INFO_FLAGS_VHT_MCS |
+ RATE_INFO_FLAGS_HE_MCS)))
+ legacy_rate = status_rate->rate_idx.legacy;
} else if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS |
IEEE80211_TX_RC_VHT_MCS)))
@@ -356,20 +365,22 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
*pos = retry_count;
pos++;
- if (status && status->rate &&
- (status->rate->flags & RATE_INFO_FLAGS_MCS)) {
+ if (status_rate && (status_rate->rate_idx.flags &
+ RATE_INFO_FLAGS_MCS))
+ {
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS));
pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
IEEE80211_RADIOTAP_MCS_HAVE_GI |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
- if (status->rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+ if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI)
pos[1] |= IEEE80211_RADIOTAP_MCS_SGI;
- if (status->rate->bw == RATE_INFO_BW_40)
+ if (status_rate->rate_idx.bw == RATE_INFO_BW_40)
pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40;
- pos[2] = status->rate->mcs;
+ pos[2] = status_rate->rate_idx.mcs;
pos += 3;
- } else if (status && status->rate &&
- (status->rate->flags & RATE_INFO_FLAGS_VHT_MCS)) {
+ } else if (status_rate && (status_rate->rate_idx.flags &
+ RATE_INFO_FLAGS_VHT_MCS))
+ {
u16 known = local->hw.radiotap_vht_details &
(IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH);
@@ -384,12 +395,12 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
pos += 2;
/* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */
- if (status->rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+ if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI)
*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI;
pos++;
/* u8 bandwidth */
- switch (status->rate->bw) {
+ switch (status_rate->rate_idx.bw) {
case RATE_INFO_BW_160:
*pos = 11;
break;
@@ -406,7 +417,8 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
pos++;
/* u8 mcs_nss[4] */
- *pos = (status->rate->mcs << 4) | status->rate->nss;
+ *pos = (status_rate->rate_idx.mcs << 4) |
+ status_rate->rate_idx.nss;
pos += 4;
/* u8 coding */
@@ -415,8 +427,9 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
pos++;
/* u16 partial_aid */
pos += 2;
- } else if (status && status->rate &&
- (status->rate->flags & RATE_INFO_FLAGS_HE_MCS)) {
+ } else if (status_rate && (status_rate->rate_idx.flags &
+ RATE_INFO_FLAGS_HE_MCS))
+ {
struct ieee80211_radiotap_he *he;
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_HE));
@@ -434,7 +447,7 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
#define HE_PREP(f, val) le16_encode_bits(val, IEEE80211_RADIOTAP_HE_##f)
- he->data6 |= HE_PREP(DATA6_NSTS, status->rate->nss);
+ he->data6 |= HE_PREP(DATA6_NSTS, status_rate->rate_idx.nss);
#define CHECK_GI(s) \
BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_GI_##s != \
@@ -444,12 +457,12 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
CHECK_GI(1_6);
CHECK_GI(3_2);
- he->data3 |= HE_PREP(DATA3_DATA_MCS, status->rate->mcs);
- he->data3 |= HE_PREP(DATA3_DATA_DCM, status->rate->he_dcm);
+ he->data3 |= HE_PREP(DATA3_DATA_MCS, status_rate->rate_idx.mcs);
+ he->data3 |= HE_PREP(DATA3_DATA_DCM, status_rate->rate_idx.he_dcm);
- he->data5 |= HE_PREP(DATA5_GI, status->rate->he_gi);
+ he->data5 |= HE_PREP(DATA5_GI, status_rate->rate_idx.he_gi);
- switch (status->rate->bw) {
+ switch (status_rate->rate_idx.bw) {
case RATE_INFO_BW_20:
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_20MHZ);
@@ -480,16 +493,16 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
CHECK_RU_ALLOC(2x996);
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
- status->rate->he_ru_alloc + 4);
+ status_rate->rate_idx.he_ru_alloc + 4);
break;
default:
- WARN_ONCE(1, "Invalid SU BW %d\n", status->rate->bw);
+ WARN_ONCE(1, "Invalid SU BW %d\n", status_rate->rate_idx.bw);
}
pos += sizeof(struct ieee80211_radiotap_he);
}
- if ((status && status->rate) || info->status.rates[0].idx < 0)
+ if (status_rate || info->status.rates[0].idx < 0)
return;
/* IEEE80211_RADIOTAP_MCS
@@ -1108,8 +1121,8 @@ void ieee80211_tx_status_ext(struct ieee80211_hw *hw,
if (pubsta) {
sta = container_of(pubsta, struct sta_info, sta);
- if (status->rate)
- sta->tx_stats.last_rate_info = *status->rate;
+ if (status->rates)
+ sta->tx_stats.last_rate_info = status->rates[0].rate_idx;
}
if (skb && (tx_time_est =
--
2.30.2
next prev parent reply other threads:[~2022-03-09 19:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-09 19:57 [PATCH v2 0/2] mac80211: extend current rate control tx status API Jonas Jelonek
2022-03-09 19:57 ` Jonas Jelonek [this message]
2022-03-09 20:38 ` [PATCH v2 1/2] " Ben Greear
2022-03-10 16:07 ` Thomas Hühn
2022-03-10 16:43 ` Ben Greear
2022-03-10 17:27 ` Jonas Jelonek
2022-03-10 17:33 ` Ben Greear
2022-03-09 19:57 ` [PATCH v2 2/2] mac80211: minstrel_ht: support ieee80211_rate_status Jonas Jelonek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220309195759.1494-2-jelonek.jonas@gmail.com \
--to=jelonek.jonas@gmail.com \
--cc=johannes@sipsolutions.net \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox