[PATCH AUTOSEL 5.17 003/149] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[PATCH AUTOSEL 5.17 003/149] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]

The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];

There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.

The patch is NOT tested with real device.

The following is the fuzzing report

BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214

CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 __kasan_report.cold+0x37/0x7c
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 kasan_report+0xe/0x20
 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
 ath5k_eeprom_init+0x2513/0x6290 [ath5k]
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? usleep_range+0xb8/0x100
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
 ath5k_hw_init+0xb60/0x1970 [ath5k]
 ath5k_init_ah+0x6fe/0x2530 [ath5k]
 ? kasprintf+0xa6/0xe0
 ? ath5k_stop+0x140/0x140 [ath5k]
 ? _dev_notice+0xf6/0xf6
 ? apic_timer_interrupt+0xa/0x20
 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 ? mutex_lock+0x89/0xd0
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0
 ? pci_device_remove+0x280/0x280
 ? pci_device_remove+0x280/0x280
 really_probe+0x209/0x5d0

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath5k/eeprom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 1fbc2c19848f..d444b3d70ba2 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -746,6 +746,9 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
 			}
 		}
 
+		if (idx == AR5K_EEPROM_N_PD_CURVES)
+			goto err_out;
+
 		ee->ee_pd_gains[mode] = 1;
 
 		pd = &chinfo[pier].pd_curves[idx];
-- 
2.34.1

[PATCH AUTOSEL 5.17 029/149] ath11k: fix kernel panic during unload/load ath11k modules

[Sasha Levin]

From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>

[ Upstream commit 22b59cb965f79ee1accf83172441c9ca0ecb632a ]

Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.

[  971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[  971.204227] pgd = 594c2919
[  971.211478] [6d97a208] *pgd=00000000
[  971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[  971.434256] Hardware name: Generic DT based system
[  971.440165] PC is at napi_by_id+0x10/0x40
[  971.445019] LR is at netif_napi_add+0x160/0x1dc

[  971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[  971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[  971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[  971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[  971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[  971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[  971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[  971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[  971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[  971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[  971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[  971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[  971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[  971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[  971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[  971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1

Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583973-21599-1-git-send-email-quic_vnaralas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/ahb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 3fb0aa000825..24bd0520926b 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -391,6 +391,8 @@ static void ath11k_ahb_free_ext_irq(struct ath11k_base *ab)
 
 		for (j = 0; j < irq_grp->num_irq; j++)
 			free_irq(ab->irq_num[irq_grp->irqs[j]], irq_grp);
+
+		netif_napi_del(&irq_grp->napi);
 	}
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.17 030/149] ath11k: pci: fix crash on suspend if board file is not found

[Sasha Levin]

From: Kalle Valo <quic_kvalo@quicinc.com>

[ Upstream commit b4f4c56459a5c744f7f066b9fc2b54ea995030c5 ]

Mario reported that the kernel was crashing on suspend if ath11k was not able
to find a board file:

[  473.693286] PM: Suspending system (s2idle)
[  473.693291] printk: Suspending console(s) (use no_console_suspend to debug)
[  474.407787] BUG: unable to handle page fault for address: 0000000000002070
[  474.407791] #PF: supervisor read access in kernel mode
[  474.407794] #PF: error_code(0x0000) - not-present page
[  474.407798] PGD 0 P4D 0
[  474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G        W         5.16.0 #248
[...]
[  474.407868] Call Trace:
[  474.407870]  <TASK>
[  474.407874]  ? _raw_spin_lock_irqsave+0x2a/0x60
[  474.407882]  ? lock_timer_base+0x72/0xa0
[  474.407889]  ? _raw_spin_unlock_irqrestore+0x29/0x3d
[  474.407892]  ? try_to_del_timer_sync+0x54/0x80
[  474.407896]  ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k]
[  474.407912]  ath11k_core_suspend+0x34/0x130 [ath11k]
[  474.407923]  ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci]
[  474.407928]  pci_pm_suspend+0x7e/0x170
[  474.407935]  ? pci_pm_freeze+0xc0/0xc0
[  474.407939]  dpm_run_callback+0x4e/0x150
[  474.407947]  __device_suspend+0x148/0x4c0
[  474.407951]  async_suspend+0x20/0x90
dmesg-efi-164255130401001:
Oops#1 Part1
[  474.407955]  async_run_entry_fn+0x33/0x120
[  474.407959]  process_one_work+0x220/0x3f0
[  474.407966]  worker_thread+0x4a/0x3d0
[  474.407971]  kthread+0x17a/0x1a0
[  474.407975]  ? process_one_work+0x3f0/0x3f0
[  474.407979]  ? set_kthread_struct+0x40/0x40
[  474.407983]  ret_from_fork+0x22/0x30
[  474.407991]  </TASK>

The issue here is that board file loading happens after ath11k_pci_probe()
succesfully returns (ath11k initialisation happends asynchronously) and the
suspend handler is still enabled, of course failing as ath11k is not properly
initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and
resume.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index de71ad594f34..903758751c99 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -1571,6 +1571,11 @@ static __maybe_unused int ath11k_pci_pm_suspend(struct device *dev)
 	struct ath11k_base *ab = dev_get_drvdata(dev);
 	int ret;
 
+	if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) {
+		ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci suspend as qmi is not initialised\n");
+		return 0;
+	}
+
 	ret = ath11k_core_suspend(ab);
 	if (ret)
 		ath11k_warn(ab, "failed to suspend core: %d\n", ret);
@@ -1583,6 +1588,11 @@ static __maybe_unused int ath11k_pci_pm_resume(struct device *dev)
 	struct ath11k_base *ab = dev_get_drvdata(dev);
 	int ret;
 
+	if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) {
+		ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci resume as qmi is not initialised\n");
+		return 0;
+	}
+
 	ret = ath11k_core_resume(ab);
 	if (ret)
 		ath11k_warn(ab, "failed to resume core: %d\n", ret);
-- 
2.34.1

[PATCH AUTOSEL 5.17 031/149] ath11k: mhi: use mhi_sync_power_up()

[Sasha Levin]

From: Kalle Valo <quic_kvalo@quicinc.com>

[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.

I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.

[  145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[  145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[  145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G        W         5.16.0-wt-ath+ #567
[  145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[  145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[  145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[  145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[  145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[  145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[  145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[  145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[  145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[  145.570465] FS:  00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[  145.570519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[  145.570623] Call Trace:
[  145.570675]  <TASK>
[  145.570727]  ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[  145.570797]  ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[  145.570864]  ? tasklet_init+0x150/0x150
[  145.570919]  ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[  145.570986]  ? tasklet_clear_sched+0x42/0xe0
[  145.571042]  ? tasklet_kill+0xe9/0x1b0
[  145.571095]  ? tasklet_clear_sched+0xe0/0xe0
[  145.571148]  ? irq_has_action+0x120/0x120
[  145.571202]  ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[  145.571270]  ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[  145.571345]  ath11k_core_stop+0x8a/0xc0 [ath11k]
[  145.571434]  ath11k_core_deinit+0x9e/0x150 [ath11k]
[  145.571499]  ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[  145.571553]  pci_device_remove+0x9a/0x1c0
[  145.571605]  __device_release_driver+0x332/0x660
[  145.571659]  driver_detach+0x1e7/0x2c0
[  145.571712]  bus_remove_driver+0xe2/0x2d0
[  145.571772]  pci_unregister_driver+0x21/0x250
[  145.571826]  __do_sys_delete_module+0x30a/0x4b0
[  145.571879]  ? free_module+0xac0/0xac0
[  145.571933]  ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[  145.571986]  ? syscall_enter_from_user_mode+0x1d/0x50
[  145.572039]  ? lockdep_hardirqs_on+0x79/0x100
[  145.572097]  do_syscall_64+0x3b/0x90
[  145.572153]  entry_SYSCALL_64_after_hwframe+0x44/0xae

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index e4250ba8dfee..f4400b25c5cf 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -560,7 +560,7 @@ static int ath11k_mhi_set_state(struct ath11k_pci *ab_pci,
 		ret = 0;
 		break;
 	case ATH11K_MHI_POWER_ON:
-		ret = mhi_async_power_up(ab_pci->mhi_ctrl);
+		ret = mhi_sync_power_up(ab_pci->mhi_ctrl);
 		break;
 	case ATH11K_MHI_POWER_OFF:
 		mhi_power_down(ab_pci->mhi_ctrl, true);
-- 
2.34.1

[PATCH AUTOSEL 5.17 039/149] mt76: mt7921: fix crash when startup fails.

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit 827e7799c61b978fbc2cc9dac66cb62401b2b3f0 ]

If the nic fails to start, it is possible that the
reset_work has already been scheduled.  Ensure the
work item is canceled so we do not have use-after-free
crash in case cleanup is called before the work item
is executed.

This fixes crash on my x86_64 apu2 when mt7921k radio
fails to work.  Radio still fails, but OS does not
crash.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 7a8d2596c226..4abb7a6e775a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -273,6 +273,7 @@ static void mt7921_stop(struct ieee80211_hw *hw)
 
 	cancel_delayed_work_sync(&dev->pm.ps_work);
 	cancel_work_sync(&dev->pm.wake_work);
+	cancel_work_sync(&dev->reset_work);
 	mt76_connac_free_pending_tx_skbs(&dev->pm, NULL);
 
 	mt7921_mutex_acquire(dev);
-- 
2.34.1

[PATCH AUTOSEL 5.17 040/149] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 577298ec55dfc8b9aece54520f0258c3f93a6573 ]

Even if it is only a false-positive since skip_buf0/skip_buf1 are only
used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in
mt76_dma_rx_fill in order to fix the following UBSAN report:

[   13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13
[   13.924909] load of value 225 is not a valid value for type '_Bool'
[   13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu
[   13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021
[   13.924915] Call Trace:
[   13.924917]  <TASK>
[   13.924920]  show_stack+0x52/0x58
[   13.924925]  dump_stack_lvl+0x4a/0x5f
[   13.924931]  dump_stack+0x10/0x12
[   13.924932]  ubsan_epilogue+0x9/0x45
[   13.924934]  __ubsan_handle_load_invalid_value.cold+0x44/0x49
[   13.924935]  ? __iommu_dma_map+0x84/0xf0
[   13.924939]  mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76]
[   13.924949]  mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76]
[   13.924954]  mt76_dma_init+0xc9/0x150 [mt76]
[   13.924959]  ? mt7921_dma_enable+0x110/0x110 [mt7921e]
[   13.924966]  mt7921_dma_init+0x1e3/0x260 [mt7921e]
[   13.924970]  mt7921_register_device+0x29d/0x510 [mt7921e]
[   13.924975]  mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e]
[   13.924980]  mt7921_pci_probe+0x43/0x60 [mt7921e]
[   13.924984]  local_pci_probe+0x4b/0x90
[   13.924987]  pci_device_probe+0x115/0x1f0
[   13.924989]  really_probe+0x21e/0x420
[   13.924992]  __driver_probe_device+0x115/0x190
[   13.924994]  driver_probe_device+0x23/0xc0
[   13.924996]  __driver_attach+0xbd/0x1d0
[   13.924998]  ? __device_attach_driver+0x110/0x110
[   13.924999]  bus_for_each_dev+0x7e/0xc0
[   13.925001]  driver_attach+0x1e/0x20
[   13.925003]  bus_add_driver+0x135/0x200
[   13.925005]  driver_register+0x95/0xf0
[   13.925008]  ? 0xffffffffc0766000
[   13.925010]  __pci_register_driver+0x68/0x70
[   13.925011]  mt7921_pci_driver_init+0x23/0x1000 [mt7921e]
[   13.925015]  do_one_initcall+0x48/0x1d0
[   13.925019]  ? kmem_cache_alloc_trace+0x19e/0x2e0
[   13.925022]  do_init_module+0x62/0x280
[   13.925025]  load_module+0xac9/0xbb0
[   13.925027]  __do_sys_finit_module+0xbf/0x120
[   13.925029]  __x64_sys_finit_module+0x18/0x20
[   13.925030]  do_syscall_64+0x5c/0xc0
[   13.925033]  ? do_syscall_64+0x69/0xc0
[   13.925034]  ? sysvec_reschedule_ipi+0x78/0xe0
[   13.925036]  ? asm_sysvec_reschedule_ipi+0xa/0x20
[   13.925039]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   13.925040] RIP: 0033:0x7fbf2b90f94d
[   13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d
[   13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013
[   13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[   13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441
[   13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0
[   13.925053]  </TASK>

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 3a9af8931c35..3d644925a4e0 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -465,6 +465,7 @@ mt76_dma_rx_fill(struct mt76_dev *dev, struct mt76_queue *q)
 
 		qbuf.addr = addr + offset;
 		qbuf.len = len - offset;
+		qbuf.skip_unmap = false;
 		mt76_dma_add_buf(dev, q, &qbuf, 1, 0, buf, NULL);
 		frames++;
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.17 042/149] cfg80211: don't add non transmitted BSS to 6GHz scanned channels

[Sasha Levin]

From: Avraham Stern <avraham.stern@intel.com>

[ Upstream commit 5666ee154f4696c011dfa8544aaf5591b6b87515 ]

When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/scan.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index b888522f133b..b2fdac96bab0 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -700,8 +700,12 @@ static bool cfg80211_find_ssid_match(struct cfg80211_colocated_ap *ap,
 
 	for (i = 0; i < request->n_ssids; i++) {
 		/* wildcard ssid in the scan request */
-		if (!request->ssids[i].ssid_len)
+		if (!request->ssids[i].ssid_len) {
+			if (ap->multi_bss && !ap->transmitted_bssid)
+				continue;
+
 			return true;
+		}
 
 		if (ap->ssid_len &&
 		    ap->ssid_len == request->ssids[i].ssid_len) {
@@ -827,6 +831,9 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 		    !cfg80211_find_ssid_match(ap, request))
 			continue;
 
+		if (!request->n_ssids && ap->multi_bss && !ap->transmitted_bssid)
+			continue;
+
 		cfg80211_scan_req_add_chan(request, chan, true);
 		memcpy(scan_6ghz_params->bssid, ap->bssid, ETH_ALEN);
 		scan_6ghz_params->short_ssid = ap->short_ssid;
-- 
2.34.1

[PATCH AUTOSEL 5.17 078/149] iwlwifi: mvm: Correctly set fragmented EBS

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ]

Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 5f92a09db374..4cd507cb412d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1893,7 +1893,10 @@ static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,
 			IWL_SCAN_CHANNEL_FLAG_CACHE_ADD;
 
 	/* set fragmented ebs for fragmented scan on HB channels */
-	if (iwl_mvm_is_scan_fragmented(params->hb_type))
+	if ((!iwl_mvm_is_cdb_supported(mvm) &&
+	     iwl_mvm_is_scan_fragmented(params->type)) ||
+	    (iwl_mvm_is_cdb_supported(mvm) &&
+	     iwl_mvm_is_scan_fragmented(params->hb_type)))
 		flags |= IWL_SCAN_CHANNEL_FLAG_EBS_FRAG;
 
 	return flags;
-- 
2.34.1

[PATCH AUTOSEL 5.17 079/149] iwlwifi: mvm: Passively scan non PSC channels only when requested so

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 9966904e9472703a05861f343157cd78f47514fd ]

Non PSC channels should generally be scanned based on information about
collocated APs obtained during scan on legacy bands, and otherwise
should not be scanned unless specifically requested so (as there are
relatively many non PSC channels, scanning them passively is time consuming
and interferes with regular data traffic).

Thus, modify the scan logic to avoid passively scanning PSC channels
if there is no information about collocated APs and the scan is not
a passive scan.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.457da4cc95eb.Ic98472bab5f5475f1e102547644caaae89ce4c4a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 42 ++++++++++++++-----
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 4cd507cb412d..630cfb64c6b1 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1735,27 +1735,37 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm,
 }
 
 /* TODO: this function can be merged with iwl_mvm_scan_umac_fill_ch_p_v6 */
-static void
-iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
+static u32
+iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm *mvm,
+				     struct iwl_mvm_scan_params *params,
 				     u32 n_channels,
 				     struct iwl_scan_probe_params_v4 *pp,
 				     struct iwl_scan_channel_params_v6 *cp,
 				     enum nl80211_iftype vif_type)
 {
-	struct iwl_scan_channel_cfg_umac *channel_cfg = cp->channel_config;
 	int i;
 	struct cfg80211_scan_6ghz_params *scan_6ghz_params =
 		params->scan_6ghz_params;
+	u32 ch_cnt;
 
-	for (i = 0; i < params->n_channels; i++) {
+	for (i = 0, ch_cnt = 0; i < params->n_channels; i++) {
 		struct iwl_scan_channel_cfg_umac *cfg =
-			&cp->channel_config[i];
+			&cp->channel_config[ch_cnt];
 
 		u32 s_ssid_bitmap = 0, bssid_bitmap = 0, flags = 0;
 		u8 j, k, s_max = 0, b_max = 0, n_used_bssid_entries;
 		bool force_passive, found = false, allow_passive = true,
 		     unsolicited_probe_on_chan = false, psc_no_listen = false;
 
+		/*
+		 * Avoid performing passive scan on non PSC channels unless the
+		 * scan is specifically a passive scan, i.e., no SSIDs
+		 * configured in the scan command.
+		 */
+		if (!cfg80211_channel_is_psc(params->channels[i]) &&
+		    !params->n_6ghz_params && params->n_ssids)
+			continue;
+
 		cfg->v1.channel_num = params->channels[i]->hw_value;
 		cfg->v2.band = 2;
 		cfg->v2.iter_count = 1;
@@ -1875,8 +1885,16 @@ iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
 		else
 			flags |= bssid_bitmap | (s_ssid_bitmap << 16);
 
-		channel_cfg[i].flags |= cpu_to_le32(flags);
+		cfg->flags |= cpu_to_le32(flags);
+		ch_cnt++;
 	}
+
+	if (params->n_channels > ch_cnt)
+		IWL_DEBUG_SCAN(mvm,
+			       "6GHz: reducing number channels: (%u->%u)\n",
+			       params->n_channels, ch_cnt);
+
+	return ch_cnt;
 }
 
 static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,
@@ -2424,10 +2442,14 @@ static int iwl_mvm_scan_umac_v14_and_above(struct iwl_mvm *mvm,
 	if (ret)
 		return ret;
 
-	iwl_mvm_umac_scan_cfg_channels_v6_6g(params,
-					     params->n_channels,
-					     pb, cp, vif->type);
-	cp->count = params->n_channels;
+	cp->count = iwl_mvm_umac_scan_cfg_channels_v6_6g(mvm, params,
+							 params->n_channels,
+							 pb, cp, vif->type);
+	if (!cp->count) {
+		mvm->scan_uid_status[uid] = 0;
+		return -EINVAL;
+	}
+
 	if (!params->n_ssids ||
 	    (params->n_ssids == 1 && !params->ssids[0].ssid_len))
 		cp->flags |= IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER;
-- 
2.34.1

Re: [PATCH AUTOSEL 5.17 079/149] iwlwifi: mvm: Passively scan non PSC channels only when requested so

[Ben Greear]

I had to revert this patch in my 5.17+ kernel (with 5.18-ish iwlwifi patches backported)
to get the station to properly scan and connect to a vendor's AP.

I got zero response to my earlier email about that regression.

I think this is not something that should be added to stable builds at this time.

Thanks,
Ben

On 4/1/22 7:24 AM, Sasha Levin wrote:
> From: Ilan Peer <ilan.peer@intel.com>
> 
> [ Upstream commit 9966904e9472703a05861f343157cd78f47514fd ]
> 
> Non PSC channels should generally be scanned based on information about
> collocated APs obtained during scan on legacy bands, and otherwise
> should not be scanned unless specifically requested so (as there are
> relatively many non PSC channels, scanning them passively is time consuming
> and interferes with regular data traffic).
> 
> Thus, modify the scan logic to avoid passively scanning PSC channels
> if there is no information about collocated APs and the scan is not
> a passive scan.
> 
> Signed-off-by: Ilan Peer <ilan.peer@intel.com>
> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
> Link: https://lore.kernel.org/r/iwlwifi.20220204122220.457da4cc95eb.Ic98472bab5f5475f1e102547644caaae89ce4c4a@changeid
> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 42 ++++++++++++++-----
>   1 file changed, 32 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
> index 4cd507cb412d..630cfb64c6b1 100644
> --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
> +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
> @@ -1735,27 +1735,37 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm,
>   }
>   
>   /* TODO: this function can be merged with iwl_mvm_scan_umac_fill_ch_p_v6 */
> -static void
> -iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
> +static u32
> +iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm *mvm,
> +				     struct iwl_mvm_scan_params *params,
>   				     u32 n_channels,
>   				     struct iwl_scan_probe_params_v4 *pp,
>   				     struct iwl_scan_channel_params_v6 *cp,
>   				     enum nl80211_iftype vif_type)
>   {
> -	struct iwl_scan_channel_cfg_umac *channel_cfg = cp->channel_config;
>   	int i;
>   	struct cfg80211_scan_6ghz_params *scan_6ghz_params =
>   		params->scan_6ghz_params;
> +	u32 ch_cnt;
>   
> -	for (i = 0; i < params->n_channels; i++) {
> +	for (i = 0, ch_cnt = 0; i < params->n_channels; i++) {
>   		struct iwl_scan_channel_cfg_umac *cfg =
> -			&cp->channel_config[i];
> +			&cp->channel_config[ch_cnt];
>   
>   		u32 s_ssid_bitmap = 0, bssid_bitmap = 0, flags = 0;
>   		u8 j, k, s_max = 0, b_max = 0, n_used_bssid_entries;
>   		bool force_passive, found = false, allow_passive = true,
>   		     unsolicited_probe_on_chan = false, psc_no_listen = false;
>   
> +		/*
> +		 * Avoid performing passive scan on non PSC channels unless the
> +		 * scan is specifically a passive scan, i.e., no SSIDs
> +		 * configured in the scan command.
> +		 */
> +		if (!cfg80211_channel_is_psc(params->channels[i]) &&
> +		    !params->n_6ghz_params && params->n_ssids)
> +			continue;
> +
>   		cfg->v1.channel_num = params->channels[i]->hw_value;
>   		cfg->v2.band = 2;
>   		cfg->v2.iter_count = 1;
> @@ -1875,8 +1885,16 @@ iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
>   		else
>   			flags |= bssid_bitmap | (s_ssid_bitmap << 16);
>   
> -		channel_cfg[i].flags |= cpu_to_le32(flags);
> +		cfg->flags |= cpu_to_le32(flags);
> +		ch_cnt++;
>   	}
> +
> +	if (params->n_channels > ch_cnt)
> +		IWL_DEBUG_SCAN(mvm,
> +			       "6GHz: reducing number channels: (%u->%u)\n",
> +			       params->n_channels, ch_cnt);
> +
> +	return ch_cnt;
>   }
>   
>   static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,
> @@ -2424,10 +2442,14 @@ static int iwl_mvm_scan_umac_v14_and_above(struct iwl_mvm *mvm,
>   	if (ret)
>   		return ret;
>   
> -	iwl_mvm_umac_scan_cfg_channels_v6_6g(params,
> -					     params->n_channels,
> -					     pb, cp, vif->type);
> -	cp->count = params->n_channels;
> +	cp->count = iwl_mvm_umac_scan_cfg_channels_v6_6g(mvm, params,
> +							 params->n_channels,
> +							 pb, cp, vif->type);
> +	if (!cp->count) {
> +		mvm->scan_uid_status[uid] = 0;
> +		return -EINVAL;
> +	}
> +
>   	if (!params->n_ssids ||
>   	    (params->n_ssids == 1 && !params->ssids[0].ssid_len))
>   		cp->flags |= IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER;
> 


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

Re: [PATCH AUTOSEL 5.17 079/149] iwlwifi: mvm: Passively scan non PSC channels only when requested so

[Sasha Levin]

On Fri, Apr 01, 2022 at 07:52:39AM -0700, Ben Greear wrote:
>I had to revert this patch in my 5.17+ kernel (with 5.18-ish iwlwifi patches backported)
>to get the station to properly scan and connect to a vendor's AP.
>
>I got zero response to my earlier email about that regression.
>
>I think this is not something that should be added to stable builds at this time.

Agreed and dropped, thanks.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.17 080/149] iwlwifi: fix small doc mistake for iwl_fw_ini_addr_val

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit 3009c797c4b3840495e8f48d8d07f48d2ddfed80 ]

There was a small copy and paste mistake in the doc declaration of
iwl_fw_ini_addr_val.  Fix it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.aeec71c397b3.I0ba3234419eb8c8c7512a2ca531a6dbb55046cf7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h
index 456b7eaac570..061fe6cc6cf5 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
- * Copyright (C) 2018-2021 Intel Corporation
+ * Copyright (C) 2018-2022 Intel Corporation
  */
 #ifndef __iwl_fw_dbg_tlv_h__
 #define __iwl_fw_dbg_tlv_h__
@@ -249,11 +249,10 @@ struct iwl_fw_ini_hcmd_tlv {
 } __packed; /* FW_TLV_DEBUG_HCMD_API_S_VER_1 */
 
 /**
-* struct iwl_fw_ini_conf_tlv - preset configuration TLV
+* struct iwl_fw_ini_addr_val - Address and value to set it to
 *
 * @address: the base address
 * @value: value to set at address
-
 */
 struct iwl_fw_ini_addr_val {
 	__le32 address;
-- 
2.34.1

[PATCH AUTOSEL 5.17 081/149] iwlwifi: mvm: move only to an enabled channel

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit e04135c07755d001b5cde61048c69a7cc84bb94b ]

During disassociation we're decreasing the phy's ref count.
If the ref count becomes 0, we're configuring the phy ctxt
to the default channel (the lowest channel which the device
can operate on). Currently we're not checking whether the
the default channel is enabled or not. Fix it by configuring
the phy ctxt to the lowest channel which is enabled.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.03f281b6a6bc.I5b63d43ec41996d599e6f37ec3f32e878b3e405e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/phy-ctxt.c | 31 +++++++++++++------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
index 9af40b0fa37a..a6e6673bf4ee 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
- * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
  * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
  * Copyright (C) 2017 Intel Deutschland GmbH
  */
@@ -349,18 +349,31 @@ void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
 	 * otherwise we might not be able to reuse this phy.
 	 */
 	if (ctxt->ref == 0) {
-		struct ieee80211_channel *chan;
+		struct ieee80211_channel *chan = NULL;
 		struct cfg80211_chan_def chandef;
-		struct ieee80211_supported_band *sband = NULL;
-		enum nl80211_band band = NL80211_BAND_2GHZ;
+		struct ieee80211_supported_band *sband;
+		enum nl80211_band band;
+		int channel;
 
-		while (!sband && band < NUM_NL80211_BANDS)
-			sband = mvm->hw->wiphy->bands[band++];
+		for (band = NL80211_BAND_2GHZ; band < NUM_NL80211_BANDS; band++) {
+			sband = mvm->hw->wiphy->bands[band];
 
-		if (WARN_ON(!sband))
-			return;
+			if (!sband)
+				continue;
+
+			for (channel = 0; channel < sband->n_channels; channel++)
+				if (!(sband->channels[channel].flags &
+						IEEE80211_CHAN_DISABLED)) {
+					chan = &sband->channels[channel];
+					break;
+				}
 
-		chan = &sband->channels[0];
+			if (chan)
+				break;
+		}
+
+		if (WARN_ON(!chan))
+			return;
 
 		cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT);
 		iwl_mvm_phy_ctxt_changed(mvm, ctxt, &chandef, 1, 1);
-- 
2.34.1

[PATCH AUTOSEL 5.17 085/149] rtw89: fix RCU usage in rtw89_core_txq_push()

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit f3d825a35920714fb7f73e4d4f36ea2328860660 ]

ieee80211_tx_h_select_key() is performing a series of RCU dereferences,
but rtw89_core_txq_push() is calling it (via ieee80211_tx_dequeue_ni())
without RCU read-side lock held; fix that.

This addresses the splat below.

 =============================
 WARNING: suspicious RCU usage
 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G            E
 -----------------------------
 net/mac80211/tx.c:593 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 2 locks held by kworker/u33:0/184:
  #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660
  #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660

 stack backtrace:
 CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G            E     5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13
 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021
 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x58/0x71
  ieee80211_tx_h_select_key+0x2c0/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365]
  ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365]
  rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea]
  process_one_work+0x2d8/0x660
  worker_thread+0x39/0x3e0
  ? process_one_work+0x660/0x660
  kthread+0xe5/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>

 =============================
 WARNING: suspicious RCU usage
 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G            E
 -----------------------------
 net/mac80211/tx.c:607 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 2 locks held by kworker/u33:0/184:
  #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660
  #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660

 stack backtrace:
 CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G            E     5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13
 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021
 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x58/0x71
  ieee80211_tx_h_select_key+0x464/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365]
  ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365]
  rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea]
  process_one_work+0x2d8/0x660
  worker_thread+0x39/0x3e0
  ? process_one_work+0x660/0x660
  kthread+0xe5/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2202152037000.11721@cbobk.fhfr.pm
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw89/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index a0737eea9f81..9632e7f218dd 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -1509,11 +1509,12 @@ static void rtw89_core_txq_push(struct rtw89_dev *rtwdev,
 	unsigned long i;
 	int ret;
 
+	rcu_read_lock();
 	for (i = 0; i < frame_cnt; i++) {
 		skb = ieee80211_tx_dequeue_ni(rtwdev->hw, txq);
 		if (!skb) {
 			rtw89_debug(rtwdev, RTW89_DBG_TXRX, "dequeue a NULL skb\n");
-			return;
+			goto out;
 		}
 		rtw89_core_txq_check_agg(rtwdev, rtwtxq, skb);
 		ret = rtw89_core_tx_write(rtwdev, vif, sta, skb, NULL);
@@ -1523,6 +1524,8 @@ static void rtw89_core_txq_push(struct rtw89_dev *rtwdev,
 			break;
 		}
 	}
+out:
+	rcu_read_unlock();
 }
 
 static u32 rtw89_check_and_reclaim_tx_resource(struct rtw89_dev *rtwdev, u8 tid)
-- 
2.34.1

[PATCH AUTOSEL 5.17 086/149] ath11k: Fix frames flush failure caused by deadlock

[Sasha Levin]

From: Baochen Qiang <quic_bqiang@quicinc.com>

[ Upstream commit 261b07519518bd14cb168b287b17e1d195f8d0c8 ]

We are seeing below warnings:

kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0
kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0

this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work
has no chance to run in 5 seconds.

By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing
ATH11K_FLUSH_TIMEOUT to 50 we get below warnings:

kernel: [  120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds.
kernel: [  120.763169]       Not tainted 5.10.90 #12
kernel: [  120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [  120.763186] task:wpa_supplicant  state:D stack:    0 pid:  924 ppid:     1 flags:0x000043a0
kernel: [  120.763201] Call Trace:
kernel: [  120.763214]  __schedule+0x785/0x12fa
kernel: [  120.763224]  ? lockdep_hardirqs_on_prepare+0xe2/0x1bb
kernel: [  120.763242]  schedule+0x7e/0xa1
kernel: [  120.763253]  schedule_timeout+0x98/0xfe
kernel: [  120.763266]  ? run_local_timers+0x4a/0x4a
kernel: [  120.763291]  ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a]
kernel: [  120.763306]  ? init_wait_entry+0x2e/0x2e
kernel: [  120.763343]  __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763378]  __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763411]  ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763441]  ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763473]  __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763540]  ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763572]  ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763612]  ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.763654]  cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763697]  nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763715]  genl_rcv_msg+0x392/0x3c2
kernel: [  120.763750]  ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763782]  ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be]
kernel: [  120.763802]  ? genl_rcv+0x36/0x36
kernel: [  120.763814]  netlink_rcv_skb+0x89/0xf7
kernel: [  120.763829]  genl_rcv+0x28/0x36
kernel: [  120.763840]  netlink_unicast+0x179/0x24b
kernel: [  120.763854]  netlink_sendmsg+0x393/0x401
kernel: [  120.763872]  sock_sendmsg+0x72/0x76
kernel: [  120.763886]  ____sys_sendmsg+0x170/0x1e6
kernel: [  120.763897]  ? copy_msghdr_from_user+0x7a/0xa2
kernel: [  120.763914]  ___sys_sendmsg+0x95/0xd1
kernel: [  120.763940]  __sys_sendmsg+0x85/0xbf
kernel: [  120.763956]  do_syscall_64+0x43/0x55
kernel: [  120.763966]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
kernel: [  120.763977] RIP: 0033:0x79089f3fcc83
kernel: [  120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
kernel: [  120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83
kernel: [  120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009
kernel: [  120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000
kernel: [  120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980
kernel: [  120.764032] R13: 00007ffe604f0638 R14: 000059b40e98c360 R15: 00007ffe604f0558
...
kernel: [  120.765230] INFO: task kworker/u32:26:4239 blocked for more than 20 seconds.
kernel: [  120.765238]       Not tainted 5.10.90 #12
kernel: [  120.765245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: [  120.765253] task:kworker/u32:26  state:D stack:    0 pid: 4239 ppid:     2 flags:0x00004080
kernel: [  120.765284] Workqueue: phy0 ieee80211_iface_work [mac80211]
kernel: [  120.765295] Call Trace:
kernel: [  120.765306]  __schedule+0x785/0x12fa
kernel: [  120.765316]  ? find_held_lock+0x3d/0xb2
kernel: [  120.765331]  schedule+0x7e/0xa1
kernel: [  120.765340]  schedule_preempt_disabled+0x15/0x1e
kernel: [  120.765349]  __mutex_lock_common+0x561/0xc0d
kernel: [  120.765375]  ? ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765390]  mutex_lock_nested+0x20/0x26
kernel: [  120.765416]  ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765430]  ? skb_dequeue+0x54/0x5e
kernel: [  120.765456]  ? ieee80211_iface_work+0x7b/0x339 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c]
kernel: [  120.765485]  process_one_work+0x270/0x504
kernel: [  120.765501]  worker_thread+0x215/0x376
kernel: [  120.765514]  kthread+0x159/0x168
kernel: [  120.765526]  ? pr_cont_work+0x5b/0x5b
kernel: [  120.765536]  ? kthread_blkcg+0x31/0x31
kernel: [  120.765550]  ret_from_fork+0x22/0x30
...
kernel: [  120.765867] Showing all locks held in the system:
...
kernel: [  120.766164] 5 locks held by wpa_supplicant/924:
kernel: [  120.766172]  #0: ffffffffb1e63eb0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x36
kernel: [  120.766197]  #1: ffffffffb1e5b1c8 (rtnl_mutex){+.+.}-{3:3}, at: nl80211_pre_doit+0x2a/0x15c [cfg80211]
kernel: [  120.766238]  #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: nl80211_deauthenticate+0xde/0x123 [cfg80211]
kernel: [  120.766279]  #3: ffff99f09df12a48 (&local->mtx){+.+.}-{3:3}, at: ieee80211_destroy_auth_data+0x9b/0xe6 [mac80211]
kernel: [  120.766321]  #4: ffff99f09df12ce0 (&local->chanctx_mtx){+.+.}-{3:3}, at: ieee80211_vif_release_channel+0x5e/0x81 [mac80211]
...
kernel: [  120.766585] 3 locks held by kworker/u32:26/4239:
kernel: [  120.766593]  #0: ffff99f04458f948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x19a/0x504
kernel: [  120.766621]  #1: ffffbad54b3cfe50 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1c0/0x504
kernel: [  120.766649]  #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_work+0x3e/0x1232 [mac80211]

With above info the issue is clear: First wmi_mgmt_tx_work is inserted
to local->workqueue after sdata->work inserted, then wpa_supplicant
acquires wdev->mtx in nl80211_deauthenticate and finally calls
ath11k_mac_op_flush where it waits all mgmt. frames to be sent out by
wmi_mgmt_tx_work. Meanwhile, sdata->work is blocked by wdev->mtx in
ieee80211_sta_work, as a result wmi_mgmt_tx_work has no chance to run.

Change to use ab->workqueue instead of local->workqueue to fix this issue.

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220217084545.18844-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 07f499d5ec92..36be4ec969ad 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5566,7 +5566,7 @@ static int ath11k_mac_mgmt_tx(struct ath11k *ar, struct sk_buff *skb,
 
 	skb_queue_tail(q, skb);
 	atomic_inc(&ar->num_pending_mgmt_tx);
-	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+	queue_work(ar->ab->workqueue, &ar->wmi_mgmt_tx_work);
 
 	return 0;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.17 088/149] rtw88: change rtw_info() to proper message level

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit a0061be4e54b52e5e4ff179c3f817107ddbb2830 ]

Larry reported funny log entries [1] when he used rtl8821ce. These
messages are not harmless, but not useful for users, so change them to
rtw_dbg() level. By the way, I review all rtw_info() and change others
to rtw_warn().

[1] https://lore.kernel.org/linux-wireless/c356d5ae-a7b3-3065-1121-64c446e70333@lwfinger.net/

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220218035527.9835-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/debug.c    | 2 +-
 drivers/net/wireless/realtek/rtw88/debug.h    | 1 +
 drivers/net/wireless/realtek/rtw88/fw.c       | 2 +-
 drivers/net/wireless/realtek/rtw88/mac80211.c | 8 ++++----
 drivers/net/wireless/realtek/rtw88/main.c     | 8 ++++----
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 2 +-
 drivers/net/wireless/realtek/rtw88/rtw8822b.c | 4 ++--
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 4 ++--
 drivers/net/wireless/realtek/rtw88/sar.c      | 8 ++++----
 9 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/debug.c b/drivers/net/wireless/realtek/rtw88/debug.c
index e429428232c1..e7e9f17df96a 100644
--- a/drivers/net/wireless/realtek/rtw88/debug.c
+++ b/drivers/net/wireless/realtek/rtw88/debug.c
@@ -390,7 +390,7 @@ static ssize_t rtw_debugfs_set_h2c(struct file *filp,
 		     &param[0], &param[1], &param[2], &param[3],
 		     &param[4], &param[5], &param[6], &param[7]);
 	if (num != 8) {
-		rtw_info(rtwdev, "invalid H2C command format for debug\n");
+		rtw_warn(rtwdev, "invalid H2C command format for debug\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/wireless/realtek/rtw88/debug.h b/drivers/net/wireless/realtek/rtw88/debug.h
index 61f8369fe2d6..066792dd96af 100644
--- a/drivers/net/wireless/realtek/rtw88/debug.h
+++ b/drivers/net/wireless/realtek/rtw88/debug.h
@@ -23,6 +23,7 @@ enum rtw_debug_mask {
 	RTW_DBG_PATH_DIV	= 0x00004000,
 	RTW_DBG_ADAPTIVITY	= 0x00008000,
 	RTW_DBG_HW_SCAN		= 0x00010000,
+	RTW_DBG_STATE		= 0x00020000,
 
 	RTW_DBG_ALL		= 0xffffffff
 };
diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 2f7c036f9022..08437df0f0ed 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -2109,7 +2109,7 @@ void rtw_hw_scan_status_report(struct rtw_dev *rtwdev, struct sk_buff *skb)
 	rtw_hw_scan_complete(rtwdev, vif, aborted);
 
 	if (aborted)
-		rtw_info(rtwdev, "HW scan aborted with code: %d\n", rc);
+		rtw_dbg(rtwdev, RTW_DBG_HW_SCAN, "HW scan aborted with code: %d\n", rc);
 }
 
 void rtw_store_op_chan(struct rtw_dev *rtwdev)
diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index ae7d97de5fdf..2933a8be1a18 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -205,7 +205,7 @@ static int rtw_ops_add_interface(struct ieee80211_hw *hw,
 
 	mutex_unlock(&rtwdev->mutex);
 
-	rtw_info(rtwdev, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
 	return 0;
 }
 
@@ -216,7 +216,7 @@ static void rtw_ops_remove_interface(struct ieee80211_hw *hw,
 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
 	u32 config = 0;
 
-	rtw_info(rtwdev, "stop vif %pM on port %d\n", vif->addr, rtwvif->port);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "stop vif %pM on port %d\n", vif->addr, rtwvif->port);
 
 	mutex_lock(&rtwdev->mutex);
 
@@ -242,8 +242,8 @@ static int rtw_ops_change_interface(struct ieee80211_hw *hw,
 {
 	struct rtw_dev *rtwdev = hw->priv;
 
-	rtw_info(rtwdev, "change vif %pM (%d)->(%d), p2p (%d)->(%d)\n",
-		 vif->addr, vif->type, type, vif->p2p, p2p);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "change vif %pM (%d)->(%d), p2p (%d)->(%d)\n",
+		vif->addr, vif->type, type, vif->p2p, p2p);
 
 	rtw_ops_remove_interface(hw, vif);
 
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 38252113c4a8..20b85af7bd3e 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -305,8 +305,8 @@ int rtw_sta_add(struct rtw_dev *rtwdev, struct ieee80211_sta *sta,
 
 	rtwdev->sta_cnt++;
 	rtwdev->beacon_loss = false;
-	rtw_info(rtwdev, "sta %pM joined with macid %d\n",
-		 sta->addr, si->mac_id);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "sta %pM joined with macid %d\n",
+		sta->addr, si->mac_id);
 
 	return 0;
 }
@@ -327,8 +327,8 @@ void rtw_sta_remove(struct rtw_dev *rtwdev, struct ieee80211_sta *sta,
 	kfree(si->mask);
 
 	rtwdev->sta_cnt--;
-	rtw_info(rtwdev, "sta %pM with macid %d left\n",
-		 sta->addr, si->mac_id);
+	rtw_dbg(rtwdev, RTW_DBG_STATE, "sta %pM with macid %d left\n",
+		sta->addr, si->mac_id);
 }
 
 struct rtw_fwcd_hdr {
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index db078df63f85..80d4761796b1 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -499,7 +499,7 @@ static s8 get_cck_rx_pwr(struct rtw_dev *rtwdev, u8 lna_idx, u8 vga_idx)
 	}
 
 	if (lna_idx >= lna_gain_table_size) {
-		rtw_info(rtwdev, "incorrect lna index (%d)\n", lna_idx);
+		rtw_warn(rtwdev, "incorrect lna index (%d)\n", lna_idx);
 		return -120;
 	}
 
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index dd4fbb82750d..a23806b69b0f 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -1012,12 +1012,12 @@ static int rtw8822b_set_antenna(struct rtw_dev *rtwdev,
 		antenna_tx, antenna_rx);
 
 	if (!rtw8822b_check_rf_path(antenna_tx)) {
-		rtw_info(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
+		rtw_warn(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
 		return -EINVAL;
 	}
 
 	if (!rtw8822b_check_rf_path(antenna_rx)) {
-		rtw_info(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
+		rtw_warn(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 35c46e5209de..ddf4d1a23e60 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -2798,7 +2798,7 @@ static int rtw8822c_set_antenna(struct rtw_dev *rtwdev,
 	case BB_PATH_AB:
 		break;
 	default:
-		rtw_info(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
+		rtw_warn(rtwdev, "unsupported tx path 0x%x\n", antenna_tx);
 		return -EINVAL;
 	}
 
@@ -2808,7 +2808,7 @@ static int rtw8822c_set_antenna(struct rtw_dev *rtwdev,
 	case BB_PATH_AB:
 		break;
 	default:
-		rtw_info(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
+		rtw_warn(rtwdev, "unsupported rx path 0x%x\n", antenna_rx);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/wireless/realtek/rtw88/sar.c b/drivers/net/wireless/realtek/rtw88/sar.c
index 3383726c4d90..c472f1502b82 100644
--- a/drivers/net/wireless/realtek/rtw88/sar.c
+++ b/drivers/net/wireless/realtek/rtw88/sar.c
@@ -91,10 +91,10 @@ int rtw_set_sar_specs(struct rtw_dev *rtwdev,
 			return -EINVAL;
 
 		power = sar->sub_specs[i].power;
-		rtw_info(rtwdev, "On freq %u to %u, set SAR %d in 1/%lu dBm\n",
-			 rtw_common_sar_freq_ranges[idx].start_freq,
-			 rtw_common_sar_freq_ranges[idx].end_freq,
-			 power, BIT(RTW_COMMON_SAR_FCT));
+		rtw_dbg(rtwdev, RTW_DBG_REGD, "On freq %u to %u, set SAR %d in 1/%lu dBm\n",
+			rtw_common_sar_freq_ranges[idx].start_freq,
+			rtw_common_sar_freq_ranges[idx].end_freq,
+			power, BIT(RTW_COMMON_SAR_FCT));
 
 		for (j = 0; j < RTW_RF_PATH_MAX; j++) {
 			for (k = 0; k < RTW_RATE_SECTION_MAX; k++) {
-- 
2.34.1

[PATCH AUTOSEL 5.17 099/149] mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 28225a6ef80ebf46c46e5fbd5b1ee231a0b2b5b7 ]

Before, the hardware would be allowed to transmit injected 802.11 MPDUs
as A-MSDU. This resulted in corrupted frames being transmitted. Now,
injected MPDUs are transmitted as-is, without A-MSDU.

The fix was verified with frame injection on MT7915 hardware, both with
and without the injected frame being encrypted.

If the hardware cannot do A-MSDU aggregation on MPDUs, this problem
would also be present in the TX path where mac80211 does the 802.11
encapsulation. However, I have not observed any such problem when
disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode.
Therefore this fix is isolated to injected frames only.

The same A-MSDU logic is also present in the mt7921 driver, so it is
likely that this fix should be applied there too. I do not have access
to mt7921 hardware so I have not been able to test that.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 48f115502282..31a792b62e1b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1080,6 +1080,7 @@ mt7915_mac_write_txwi_80211(struct mt7915_dev *dev, __le32 *txwi,
 		val = MT_TXD3_SN_VALID |
 		      FIELD_PREP(MT_TXD3_SEQ, IEEE80211_SEQ_TO_SN(seqno));
 		txwi[3] |= cpu_to_le32(val);
+		txwi[7] &= ~cpu_to_le32(MT_TXD7_HW_AMSDU);
 	}
 
 	val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
-- 
2.34.1

[PATCH AUTOSEL 5.17 103/149] mt76: mt7615: Fix assigning negative values to unsigned variable

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 9273ffcc9a11942bd586bb42584337ef3962b692 ]

Smatch reports the following:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned
variable 'def_th'
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned
variable 'def_th'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index ec25e5a95d44..dd4ab6063440 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1835,7 +1835,7 @@ mt7615_mac_adjust_sensitivity(struct mt7615_phy *phy,
 	struct mt7615_dev *dev = phy->dev;
 	int false_cca = ofdm ? phy->false_cca_ofdm : phy->false_cca_cck;
 	bool ext_phy = phy != &dev->phy;
-	u16 def_th = ofdm ? -98 : -110;
+	s16 def_th = ofdm ? -98 : -110;
 	bool update = false;
 	s8 *sensitivity;
 	int signal;
-- 
2.34.1

[PATCH AUTOSEL 5.17 138/149] mt76: fix monitor mode crash with sdio driver

[Sasha Levin]

From: Deren Wu <deren.wu@mediatek.com>

[ Upstream commit 123bc712b1de0805f9d683687e17b1ec2aba0b68 ]

mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().

To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.

[   52.007562] kernel BUG at include/linux/skbuff.h:2313!
[   52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   52.007987] pc : skb_pull+0x48/0x4c
[   52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[   52.008361] Call trace:
[   52.008377]  skb_pull+0x48/0x4c
[   52.008400]  mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[   52.008431]  __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[   52.008449]  kthread+0x148/0x3ac
[   52.008466]  ret_from_fork+0x10/0x30

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 404c3d1a70d6..368a5c6455b1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -19,7 +19,7 @@
 
 #define MT_MCU_RING_SIZE	32
 #define MT_RX_BUF_SIZE		2048
-#define MT_SKB_HEAD_LEN		128
+#define MT_SKB_HEAD_LEN		256
 
 #define MT_MAX_NON_AQL_PKT	16
 #define MT_TXQ_FREE_THR		32
-- 
2.34.1

[PATCH AUTOSEL 5.17 140/149] iwlwifi: mei: fix building iwlmei

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 066291bec0c55315e568ead501bebdefcb8453d2 ]

Building iwlmei without CONFIG_CFG80211 causes a link-time warning:

ld.lld: error: undefined symbol: ieee80211_hdrlen
>>> referenced by net.c
>>>               net/wireless/intel/iwlwifi/mei/net.o:(iwl_mei_tx_copy_to_csme) in archive drivers/built-in.a

Add an explicit dependency to avoid this. In theory it should not
be needed here, but it also seems pointless to allow IWLMEI
for configurations without CFG80211.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Emmanuel Grumbach <Emmanuel.grumbach@intel.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316183617.1470631-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 85e704283755..a647a406b87b 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -139,6 +139,7 @@ config IWLMEI
 	tristate "Intel Management Engine communication over WLAN"
 	depends on INTEL_MEI
 	depends on PM
+	depends on CFG80211
 	help
 	  Enables the iwlmei kernel module.
 
-- 
2.34.1