From: Wenli Looi <wlooi@ucalgary.ca>
To: "Toke Høiland-Jørgensen" <toke@toke.dk>
Cc: Kalle Valo <kvalo@kernel.org>,
linux-wireless@vger.kernel.org, ath9k-devel@qca.qualcomm.com,
Wenli Looi <wlooi@ucalgary.ca>
Subject: [PATCH 1/9] ath9k: add QCN550x device IDs
Date: Mon, 18 Apr 2022 00:13:05 -0700 [thread overview]
Message-ID: <20220418071313.882179-2-wlooi@ucalgary.ca> (raw)
In-Reply-To: <20220418071313.882179-1-wlooi@ucalgary.ca>
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
---
drivers/net/wireless/ath/ath9k/ahb.c | 4 ++++
drivers/net/wireless/ath/ath9k/hw.c | 6 ++++++
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/reg.h | 5 ++++-
4 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 9cd12b20b..1835b4469 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -47,6 +47,10 @@ static const struct platform_device_id ath9k_platform_id_table[] = {
.name = "qca956x_wmac",
.driver_data = AR9300_DEVID_QCA956X,
},
+ {
+ .name = "qcn550x_wmac",
+ .driver_data = AR9300_DEVID_QCN550X,
+ },
{},
};
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 172081ffe..047512ce1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -282,6 +282,9 @@ static bool ath9k_hw_read_revisions(struct ath_hw *ah)
case AR9300_DEVID_QCA956X:
ah->hw_version.macVersion = AR_SREV_VERSION_9561;
return true;
+ case AR9300_DEVID_QCN550X:
+ ah->hw_version.macVersion = AR_SREV_VERSION_5502;
+ return true;
}
srev = REG_READ(ah, AR_SREV);
@@ -592,6 +595,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
case AR_SREV_VERSION_9565:
case AR_SREV_VERSION_9531:
case AR_SREV_VERSION_9561:
+ case AR_SREV_VERSION_5502:
break;
default:
ath_err(common,
@@ -688,6 +692,7 @@ int ath9k_hw_init(struct ath_hw *ah)
case AR9300_DEVID_AR9565:
case AR9300_DEVID_AR953X:
case AR9300_DEVID_QCA956X:
+ case AR9300_DEVID_QCN550X:
break;
default:
if (common->bus_ops->ath_bus_type == ATH_USB)
@@ -3315,6 +3320,7 @@ static struct {
{ AR_SREV_VERSION_9565, "9565" },
{ AR_SREV_VERSION_9531, "9531" },
{ AR_SREV_VERSION_9561, "9561" },
+ { AR_SREV_VERSION_5502, "5502" },
};
/* For devices with external radios */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 096a206f4..759a5991a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -56,6 +56,7 @@
#define AR9300_DEVID_AR9565 0x0036
#define AR9300_DEVID_AR953X 0x003d
#define AR9300_DEVID_QCA956X 0x003f
+#define AR9300_DEVID_QCN550X 0x0040
#define AR5416_AR9100_DEVID 0x000b
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 8983ea6fc..5a07cf7d8 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -825,6 +825,7 @@
#define AR_SREV_REVISION_9531_11 1
#define AR_SREV_REVISION_9531_20 2
#define AR_SREV_VERSION_9561 0x600
+#define AR_SREV_VERSION_5502 0x700
#define AR_SREV_5416(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) || \
@@ -992,10 +993,12 @@
#define AR_SREV_9561(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9561))
+#define AR_SREV_5502(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_5502))
#define AR_SREV_SOC(_ah) \
(AR_SREV_9340(_ah) || AR_SREV_9531(_ah) || AR_SREV_9550(_ah) || \
- AR_SREV_9561(_ah))
+ AR_SREV_9561(_ah) || AR_SREV_5502(_ah))
/* NOTE: When adding chips newer than Peacock, add chip check here */
#define AR_SREV_9580_10_OR_LATER(_ah) \
--
2.25.1
next prev parent reply other threads:[~2022-04-18 7:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-18 7:13 [PATCH 0/9] ath9k: add support for QCN550x Wenli Looi
2022-04-18 7:13 ` Wenli Looi [this message]
2022-04-20 12:00 ` [PATCH 1/9] ath9k: add QCN550x device IDs Kalle Valo
2022-04-18 7:13 ` [PATCH 2/9] ath9k: basic support for QCN550x Wenli Looi
2022-04-20 12:01 ` Kalle Valo
2022-04-18 7:13 ` [PATCH 3/9] ath9k: add QCN550x initvals Wenli Looi
2022-04-18 7:13 ` [PATCH 4/9] ath9k: implement QCN550x rx Wenli Looi
2022-04-18 7:13 ` [PATCH 5/9] ath9k: implement QCN550x tx Wenli Looi
2022-04-18 7:13 ` [PATCH 6/9] ath9k: group some ar9300 eeprom functions at the top Wenli Looi
2022-04-18 7:13 ` [PATCH 7/9] ath9k: add abstractions over ar9300 eeprom Wenli Looi
2022-04-18 7:13 ` [PATCH 8/9] ath9k: rename ar9300_eeprom to ar9300_eeprom_v1 Wenli Looi
2022-04-18 7:13 ` [PATCH 9/9] ath9k: add ar9300_eeprom_v2 Wenli Looi
2022-05-10 18:39 ` [PATCH 0/9] ath9k: add support for QCN550x Wenli Looi
2022-05-11 4:39 ` Kalle Valo
2022-05-11 9:54 ` Toke Høiland-Jørgensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220418071313.882179-2-wlooi@ucalgary.ca \
--to=wlooi@ucalgary.ca \
--cc=ath9k-devel@qca.qualcomm.com \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=toke@toke.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).