From: Lech Perczak <lech.perczak@camlingroup.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org,
"Paweł Lenkow" <pawel.lenkow@camlingroup.com>,
"Jérôme Pouiller" <jerome.pouiller@silabs.com>,
"Peter Seiderer" <ps.report@gmx.net>,
"Kalle Valo" <kvalo@kernel.org>,
"Krzysztof Drobiński" <krzysztof.drobinski@camlingroup.com>,
"Lech Perczak" <lech.perczak@camlingroup.com>
Subject: [PATCH] mac80211: fix memory corruption in minstrel_ht_update_rates()
Date: Mon, 19 Sep 2022 17:01:35 +0200 [thread overview]
Message-ID: <20220919150135.90785-1-lech.perczak@camlingroup.com> (raw)
From: Paweł Lenkow <pawel.lenkow@camlingroup.com>
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab756a ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
---
net/mac80211/rc80211_minstrel_ht.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 5f27e6746762..788a82f9c74d 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -10,6 +10,7 @@
#include <linux/random.h>
#include <linux/moduleparam.h>
#include <linux/ieee80211.h>
+#include <linux/minmax.h>
#include <net/mac80211.h>
#include "rate.h"
#include "sta_info.h"
@@ -1550,6 +1551,7 @@ minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
{
struct ieee80211_sta_rates *rates;
int i = 0;
+ int max_rates = min_t(int, mp->hw->max_rates, IEEE80211_TX_RATE_TABLE_SIZE);
rates = kzalloc(sizeof(*rates), GFP_ATOMIC);
if (!rates)
@@ -1559,10 +1561,10 @@ minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[0]);
/* Fill up remaining, keep one entry for max_probe_rate */
- for (; i < (mp->hw->max_rates - 1); i++)
+ for (; i < (max_rates - 1); i++)
minstrel_ht_set_rate(mp, mi, rates, i, mi->max_tp_rate[i]);
- if (i < mp->hw->max_rates)
+ if (i < max_rates)
minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
if (i < IEEE80211_TX_RATE_TABLE_SIZE)
--
2.25.1
next reply other threads:[~2022-09-19 15:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 15:01 Lech Perczak [this message]
2022-09-19 19:31 ` [PATCH] mac80211: fix memory corruption in minstrel_ht_update_rates() Peter Seiderer
2022-09-20 8:27 ` Jérôme Pouiller
2022-09-20 8:46 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220919150135.90785-1-lech.perczak@camlingroup.com \
--to=lech.perczak@camlingroup.com \
--cc=jerome.pouiller@silabs.com \
--cc=johannes@sipsolutions.net \
--cc=krzysztof.drobinski@camlingroup.com \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pawel.lenkow@camlingroup.com \
--cc=ps.report@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox