[PATCH AUTOSEL 6.1 03/85] brcmfmac: return error when getting invalid max_flowrings from dongle

[PATCH AUTOSEL 6.1 03/85] brcmfmac: return error when getting invalid max_flowrings from dongle

[Sasha Levin]

From: Wright Feng <wright.feng@cypress.com>

[ Upstream commit 2aca4f3734bd717e04943ddf340d49ab62299a00 ]

When firmware hit trap at initialization, host will read abnormal
max_flowrings number from dongle, and it will cause kernel panic when
doing iowrite to initialize dongle ring.
To detect this error at early stage, we directly return error when getting
invalid max_flowrings(>256).

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 80083f9ea311..8b72deff12f5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1218,6 +1218,10 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
 				BRCMF_NROF_H2D_COMMON_MSGRINGS;
 		max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
 	}
+	if (max_flowrings > 256) {
+		brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
+		return -EIO;
+	}
 
 	if (devinfo->dma_idx_sz != 0) {
 		bufsz = (max_submissionrings + max_completionrings) *
-- 
2.35.1

[PATCH AUTOSEL 6.1 04/85] wifi: ath9k: verify the expected usb_endpoints are present

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ]

The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
 ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
 ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
 ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
 kthread+0x3b4/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 4d9002a9d082..1ffd6cd5dceb 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1329,10 +1329,24 @@ static int send_eject_command(struct usb_interface *interface)
 static int ath9k_hif_usb_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
 	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *alt;
 	struct hif_device_usb *hif_dev;
 	int ret = 0;
 
+	/* Verify the expected endpoints are present */
+	alt = interface->cur_altsetting;
+	if (usb_find_common_endpoints(alt, &bulk_in, &bulk_out, &int_in, &int_out) < 0 ||
+	    usb_endpoint_num(bulk_in) != USB_WLAN_RX_PIPE ||
+	    usb_endpoint_num(bulk_out) != USB_WLAN_TX_PIPE ||
+	    usb_endpoint_num(int_in) != USB_REG_IN_PIPE ||
+	    usb_endpoint_num(int_out) != USB_REG_OUT_PIPE) {
+		dev_err(&udev->dev,
+			"ath9k_htc: Device endpoint numbers are not the expected ones\n");
+		return -ENODEV;
+	}
+
 	if (id->driver_info == STORAGE_DEVICE)
 		return send_eject_command(interface);
 
-- 
2.35.1

[PATCH AUTOSEL 6.1 05/85] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ]

syzkaller reported use-after-free with the stack trace like below [1]:

[   38.960489][    C3] ==================================================================
[   38.963216][    C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[   38.964950][    C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[   38.966363][    C3]
[   38.967053][    C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[   38.968464][    C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[   38.969959][    C3] Call Trace:
[   38.970841][    C3]  <IRQ>
[   38.971663][    C3]  dump_stack_lvl+0xfc/0x174
[   38.972620][    C3]  print_report.cold+0x2c3/0x752
[   38.973626][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.974644][    C3]  kasan_report+0xb1/0x1d0
[   38.975720][    C3]  ? ar5523_cmd_tx_cb+0x220/0x240
[   38.976831][    C3]  ar5523_cmd_tx_cb+0x220/0x240
[   38.978412][    C3]  __usb_hcd_giveback_urb+0x353/0x5b0
[   38.979755][    C3]  usb_hcd_giveback_urb+0x385/0x430
[   38.981266][    C3]  dummy_timer+0x140c/0x34e0
[   38.982925][    C3]  ? notifier_call_chain+0xb5/0x1e0
[   38.984761][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.986242][    C3]  ? lock_release+0x51c/0x790
[   38.987323][    C3]  ? _raw_read_unlock_irqrestore+0x37/0x70
[   38.988483][    C3]  ? __wake_up_common_lock+0xde/0x130
[   38.989621][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   38.990777][    C3]  ? lock_acquire+0x472/0x550
[   38.991919][    C3]  ? rcu_read_lock_sched_held+0xb/0x60
[   38.993138][    C3]  ? lock_acquire+0x472/0x550
[   38.994890][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.996266][    C3]  ? do_raw_spin_unlock+0x16f/0x230
[   38.997670][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   38.999116][    C3]  call_timer_fn+0x1a0/0x6a0
[   39.000668][    C3]  ? add_timer_on+0x4a0/0x4a0
[   39.002137][    C3]  ? reacquire_held_locks+0x4a0/0x4a0
[   39.003809][    C3]  ? __next_timer_interrupt+0x226/0x2a0
[   39.005509][    C3]  __run_timers.part.0+0x69a/0xac0
[   39.007025][    C3]  ? dummy_urb_enqueue+0x860/0x860
[   39.008716][    C3]  ? call_timer_fn+0x6a0/0x6a0
[   39.010254][    C3]  ? cpuacct_percpu_seq_show+0x10/0x10
[   39.011795][    C3]  ? kvm_sched_clock_read+0x14/0x40
[   39.013277][    C3]  ? sched_clock_cpu+0x69/0x2b0
[   39.014724][    C3]  run_timer_softirq+0xb6/0x1d0
[   39.016196][    C3]  __do_softirq+0x1d2/0x9be
[   39.017616][    C3]  __irq_exit_rcu+0xeb/0x190
[   39.019004][    C3]  irq_exit_rcu+0x5/0x20
[   39.020361][    C3]  sysvec_apic_timer_interrupt+0x8f/0xb0
[   39.021965][    C3]  </IRQ>
[   39.023237][    C3]  <TASK>

In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):

ar5523_probe()
-> ar5523_host_available()
   -> ar5523_cmd_read()
      -> ar5523_cmd()

If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure.  So, ar5523_cmd_tx_cb()
might touch the freed structure.

This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out.

Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1]
Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 6f937d2cc126..ce3d613fa36c 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -241,6 +241,11 @@ static void ar5523_cmd_tx_cb(struct urb *urb)
 	}
 }
 
+static void ar5523_cancel_tx_cmd(struct ar5523 *ar)
+{
+	usb_kill_urb(ar->tx_cmd.urb_tx);
+}
+
 static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 		      int ilen, void *odata, int olen, int flags)
 {
@@ -280,6 +285,7 @@ static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
 	}
 
 	if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+		ar5523_cancel_tx_cmd(ar);
 		cmd->odata = NULL;
 		ar5523_err(ar, "timeout waiting for command %02x reply\n",
 			   code);
-- 
2.35.1

[PATCH AUTOSEL 6.1 09/85] wifi: ath10k: Delay the unmapping of the buffer

[Sasha Levin]

From: Youghandhar Chintala <quic_youghand@quicinc.com>

[ Upstream commit acd4324e5f1f11351630234297f95076f0ac9a2f ]

On WCN3990, we are seeing a rare scenario where copy engine hardware is
sending a copy complete interrupt to the host driver while still
processing the buffer that the driver has sent, this is leading into an
SMMU fault triggering kernel panic. This is happening on copy engine
channel 3 (CE3) where the driver normally enqueues WMI commands to the
firmware. Upon receiving a copy complete interrupt, host driver will
immediately unmap and frees the buffer presuming that hardware has
processed the buffer. In the issue case, upon receiving copy complete
interrupt, host driver will unmap and free the buffer but since hardware
is still accessing the buffer (which in this case got unmapped in
parallel), SMMU hardware will trigger an SMMU fault resulting in a
kernel panic.

In order to avoid this, as a work around, add a delay before unmapping
the copy engine source DMA buffer. This is conditionally done for
WCN3990 and only for the CE3 channel where issue is seen.

Below is the crash signature:

wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled
context fault: fsr=0x402, iova=0x7fdfd8ac0,
fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled
context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003,
cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error
received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091:
cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149
remoteproc remoteproc0: crash detected in
4080000.remoteproc: type fatal error <3> remoteproc remoteproc0:
handling crash #1 in 4080000.remoteproc

pc : __arm_lpae_unmap+0x500/0x514
lr : __arm_lpae_unmap+0x4bc/0x514
sp : ffffffc011ffb530
x29: ffffffc011ffb590 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000004
x25: 0000000000000003 x24: ffffffc011ffb890
x23: ffffffa762ef9be0 x22: ffffffa77244ef00
x21: 0000000000000009 x20: 00000007fff7c000
x19: 0000000000000003 x18: 0000000000000000
x17: 0000000000000004 x16: ffffffd7a357d9f0
x15: 0000000000000000 x14: 00fd5d4fa7ffffff
x13: 000000000000000e x12: 0000000000000000
x11: 00000000ffffffff x10: 00000000fffffe00
x9 : 000000000000017c x8 : 000000000000000c
x7 : 0000000000000000 x6 : ffffffa762ef9000
x5 : 0000000000000003 x4 : 0000000000000004
x3 : 0000000000001000 x2 : 00000007fff7c000
x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace:
__arm_lpae_unmap+0x500/0x514
__arm_lpae_unmap+0x4bc/0x514
__arm_lpae_unmap+0x4bc/0x514
arm_lpae_unmap_pages+0x78/0xa4
arm_smmu_unmap_pages+0x78/0x104
__iommu_unmap+0xc8/0x1e4
iommu_unmap_fast+0x38/0x48
__iommu_dma_unmap+0x84/0x104
iommu_dma_free+0x34/0x50
dma_free_attrs+0xa4/0xd0
ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c
[ath10k_core]
ath10k_halt+0x11c/0x180 [ath10k_core]
ath10k_stop+0x54/0x94 [ath10k_core]
drv_stop+0x48/0x1c8 [mac80211]
ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c
[mac80211]
__dev_open+0xb4/0x174
__dev_change_flags+0xc4/0x1dc
dev_change_flags+0x3c/0x7c
devinet_ioctl+0x2b4/0x580
inet_ioctl+0xb0/0x1b4
sock_do_ioctl+0x4c/0x16c
compat_ifreq_ioctl+0x1cc/0x35c
compat_sock_ioctl+0x110/0x2ac
__arm64_compat_sys_ioctl+0xf4/0x3e0
el0_svc_common+0xb4/0x17c
el0_svc_compat_handler+0x2c/0x58
el0_svc_compat+0x8/0x2c

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1

Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221012142733.32420-1-quic_youghand@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath10k/htc.c  |  9 +++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 3 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 400f332a7ff0..5eb131ab916f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -99,6 +99,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -138,6 +139,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -178,6 +180,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -213,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -252,6 +256,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -291,6 +296,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -330,6 +336,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -373,6 +380,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -418,6 +426,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -470,6 +479,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -519,6 +529,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -558,6 +569,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -599,6 +611,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -631,6 +644,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -677,6 +691,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = false,
 		.hw_restart_disconnect = false,
 		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -709,6 +724,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.dynamic_sar_support = true,
 		.hw_restart_disconnect = true,
 		.use_fw_tx_credits = false,
+		.delay_unmap_buffer = true,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 6d1784f74bea..5bfeecb95fca 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -56,6 +56,15 @@ void ath10k_htc_notify_tx_completion(struct ath10k_htc_ep *ep,
 	ath10k_dbg(ar, ATH10K_DBG_HTC, "%s: ep %d skb %pK\n", __func__,
 		   ep->eid, skb);
 
+	/* A corner case where the copy completion is reaching to host but still
+	 * copy engine is processing it due to which host unmaps corresponding
+	 * memory and causes SMMU fault, hence as workaround adding delay
+	 * the unmapping memory to avoid SMMU faults.
+	 */
+	if (ar->hw_params.delay_unmap_buffer &&
+	    ep->ul_pipe_id == 3)
+		mdelay(2);
+
 	hdr = (struct ath10k_htc_hdr *)skb->data;
 	ath10k_htc_restore_tx_skb(ep->htc, skb);
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 1b99f3a39a11..9643031a4427 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -637,6 +637,8 @@ struct ath10k_hw_params {
 	bool hw_restart_disconnect;
 
 	bool use_fw_tx_credits;
+
+	bool delay_unmap_buffer;
 };
 
 struct htt_resp;
-- 
2.35.1

[PATCH AUTOSEL 6.1 20/85] wifi: ath11k: Fix qmi_msg_handler data structure initialization

[Sasha Levin]

From: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>

[ Upstream commit ed3725e15a154ebebf44e0c34806c57525483f92 ]

qmi_msg_handler is required to be null terminated by QMI module.
There might be a case where a handler for a msg id is not present in the
handlers array which can lead to infinite loop while searching the handler
and therefore out of bound access in qmi_invoke_handler().
Hence update the initialization in qmi_msg_handler data structure.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 51de2208b789..8358fe08c234 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -3087,6 +3087,9 @@ static const struct qmi_msg_handler ath11k_qmi_msg_handlers[] = {
 			sizeof(struct qmi_wlfw_fw_init_done_ind_msg_v01),
 		.fn = ath11k_qmi_msg_fw_init_done_cb,
 	},
+
+	/* end of list */
+	{},
 };
 
 static int ath11k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,
-- 
2.35.1

[PATCH AUTOSEL 6.1 26/85] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()

[Sasha Levin]

From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>

[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]

This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.

Found by a modified version of syzkaller.

UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
 ? lock_chain_count+0x20/0x20
 brcmf_fw_alloc_request.cold+0x19/0x3ea
 ? brcmf_fw_get_firmwares+0x250/0x250
 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
 brcmf_usb_get_fwname+0x114/0x1a0
 ? brcmf_usb_reset_resume+0x120/0x120
 ? number+0x6c4/0x9a0
 brcmf_c_process_clm_blob+0x168/0x590
 ? put_dec+0x90/0x90
 ? enable_ptr_key_workfn+0x20/0x20
 ? brcmf_common_pd_remove+0x50/0x50
 ? rcu_read_lock_sched_held+0xa1/0xd0
 brcmf_c_preinit_dcmds+0x673/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1cc/0x260
 ? mark_held_locks+0x9f/0xe0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 ? trace_hardirqs_on+0x1c/0x120
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1476/0x1d50
 ? kmemdup+0x30/0x40
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 ? usb_match_id.part.0+0x88/0xc0
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __mutex_unlock_slowpath+0xe7/0x660
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_set_configuration+0x984/0x1770
 ? kernfs_create_link+0x175/0x230
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 ? driver_allows_async_probing+0x120/0x120
 bus_for_each_drv+0x123/0x1a0
 ? bus_rescan_devices+0x20/0x20
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x1c/0x120
 __device_attach+0x207/0x330
 ? device_bind_driver+0xb0/0xb0
 ? kobject_uevent_env+0x230/0x12c0
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 ? __fw_devlink_link_to_suppliers+0x550/0x550
 usb_new_device.cold+0x463/0xf66
 ? hub_disconnect+0x400/0x400
 ? _raw_spin_unlock_irq+0x24/0x30
 hub_event+0x10d5/0x3330
 ? hub_port_debounce+0x280/0x280
 ? __lock_acquire+0x1671/0x5790
 ? wq_calc_node_cpumask+0x170/0x2a0
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index f2207793f6e2..09d2f2dc2b46 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -803,6 +803,11 @@ brcmf_fw_alloc_request(u32 chip, u32 chiprev,
 	u32 i, j;
 	char end = '\0';
 
+	if (chiprev >= BITS_PER_TYPE(u32)) {
+		brcmf_err("Invalid chip revision %u\n", chiprev);
+		return NULL;
+	}
+
 	for (i = 0; i < table_size; i++) {
 		if (mapping_table[i].chipid == chip &&
 		    mapping_table[i].revmask & BIT(chiprev))
-- 
2.35.1

[PATCH AUTOSEL 6.1 27/85] wifi: brcmfmac: Fix potential NULL pointer dereference in 'brcmf_c_preinit_dcmds()'

[Sasha Levin]

From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>

[ Upstream commit 683b9728f28895660c66da250cd31654b8fcbc6e ]

This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when ptr which is NULL pointer passed as an argument of strlcpy() in
brcmf_c_preinit_dcmds(). This happens when the driver passes a firmware
version string that does not contain a space " ", making strrchr()
return a null pointer. This patch adds a null pointer check.

Found by a modified version of syzkaller.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1983 Comm: kworker/0:2 Not tainted 5.14.0+ #79
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:strlen+0x1a/0x90
Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00
00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04
02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801
R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c
R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 brcmf_c_preinit_dcmds+0x9f2/0xc40
 ? brcmf_c_set_joinpref_default+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lock_acquire+0x19d/0x4e0
 ? find_held_lock+0x2d/0x110
 ? brcmf_usb_deq+0x1a7/0x260
 ? brcmf_usb_rx_fill_all+0x5a/0xf0
 brcmf_attach+0x246/0xd40
 ? wiphy_new_nm+0x1703/0x1dd0
 ? kmemdup+0x43/0x50
 brcmf_usb_probe+0x12de/0x1690
 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
 usb_probe_interface+0x2aa/0x760
 ? usb_probe_device+0x250/0x250
 really_probe+0x205/0xb70
 ? driver_allows_async_probing+0x130/0x130
 __driver_probe_device+0x311/0x4b0
 ? driver_allows_async_probing+0x130/0x130
 driver_probe_device+0x4e/0x150
 __device_attach_driver+0x1cc/0x2a0
 bus_for_each_drv+0x156/0x1d0
 ? bus_rescan_devices+0x30/0x30
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 ? trace_hardirqs_on+0x46/0x160
 __device_attach+0x23f/0x3a0
 ? device_bind_driver+0xd0/0xd0
 ? kobject_uevent_env+0x287/0x14b0
 bus_probe_device+0x1da/0x290
 device_add+0xb7b/0x1eb0
 ? wait_for_completion+0x290/0x290
 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
 usb_set_configuration+0xf59/0x16f0
 usb_generic_driver_probe+0x82/0xa0
 usb_probe_device+0xbb/0x250
 ? usb_suspend+0x590/0x590
 really_probe+0x205/0xb70
 ? driver_allows_async_probing+0x130/0x130
 __driver_probe_device+0x311/0x4b0
 ? usb_generic_driver_match+0x75/0x90
 ? driver_allows_async_probing+0x130/0x130
 driver_probe_device+0x4e/0x150
 __device_attach_driver+0x1cc/0x2a0
 bus_for_each_drv+0x156/0x1d0
 ? bus_rescan_devices+0x30/0x30
 ? _raw_spin_unlock_irqrestore+0x47/0x50
 __device_attach+0x23f/0x3a0
 ? device_bind_driver+0xd0/0xd0
 ? kobject_uevent_env+0x287/0x14b0
 bus_probe_device+0x1da/0x290
 device_add+0xb7b/0x1eb0
 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0
 ? kfree+0x14a/0x6b0
 ? __usb_get_extra_descriptor+0x116/0x160
 usb_new_device.cold+0x49c/0x1029
 ? hub_disconnect+0x450/0x450
 ? rwlock_bug.part.0+0x90/0x90
 ? _raw_spin_unlock_irq+0x24/0x30
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 hub_event+0x248b/0x31c9
 ? usb_port_suspend.cold+0x139/0x139
 ? check_irq_usage+0x861/0xf20
 ? drain_workqueue+0x280/0x360
 ? lock_release+0x640/0x640
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x92b/0x1460
 ? pwq_dec_nr_in_flight+0x330/0x330
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x95/0xe00
 ? __kthread_parkme+0x115/0x1e0
 ? process_one_work+0x1460/0x1460
 kthread+0x3a1/0x480
 ? set_kthread_struct+0x120/0x120
 ret_from_fork+0x1f/0x30
Modulesdd linked in:
---[ end trace c112c68924ddd800 ]---
RIP: 0010:strlen+0x1a/0x90
Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00
00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04
02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00
RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296
RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801
R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c
R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221101183642.166450-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 74020fa10065..22344e68fd59 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -305,8 +305,12 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 	brcmf_info("Firmware: %s %s\n", ri->chipname, buf);
 
 	/* locate firmware version number for ethtool */
-	ptr = strrchr(buf, ' ') + 1;
-	strscpy(ifp->drvr->fwver, ptr, sizeof(ifp->drvr->fwver));
+	ptr = strrchr(buf, ' ');
+	if (!ptr) {
+		bphy_err(drvr, "Retrieving version number failed");
+		goto done;
+	}
+	strscpy(ifp->drvr->fwver, ptr + 1, sizeof(ifp->drvr->fwver));
 
 	/* Query for 'clmver' to get CLM version info from firmware */
 	memset(buf, 0, sizeof(buf));
-- 
2.35.1

[PATCH AUTOSEL 6.1 71/85] wifi: mt76: do not run mt76u_status_worker if the device is not running

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit bd5dac7ced5a7c9faa4dc468ac9560c3256df845 ]

Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.

KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 mt76x02_send_tx_status+0x1d2/0xeb0
 mt76x02_tx_status_data+0x8e/0xd0
 mt76u_tx_status_data+0xe1/0x240
 process_one_work+0x92b/0x1460
 worker_thread+0x95/0xe00
 kthread+0x3a1/0x480
 ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554

Moreover move stat_work schedule out of the for loop.

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/usb.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 4c4033bb1bb3..0597df2729a6 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -766,6 +766,9 @@ static void mt76u_status_worker(struct mt76_worker *w)
 	struct mt76_queue *q;
 	int i;
 
+	if (!test_bit(MT76_STATE_RUNNING, &dev->phy.state))
+		return;
+
 	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
 		q = dev->phy.q_tx[i];
 		if (!q)
@@ -785,11 +788,11 @@ static void mt76u_status_worker(struct mt76_worker *w)
 			wake_up(&dev->tx_wait);
 
 		mt76_worker_schedule(&dev->tx_worker);
-
-		if (dev->drv->tx_status_data &&
-		    !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
-			queue_work(dev->wq, &dev->usb.stat_work);
 	}
+
+	if (dev->drv->tx_status_data &&
+	    !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
+		queue_work(dev->wq, &dev->usb.stat_work);
 }
 
 static void mt76u_tx_status_data(struct work_struct *work)
-- 
2.35.1