* [PATCH AUTOSEL 5.4 02/30] brcmfmac: return error when getting invalid max_flowrings from dongle
[not found] <20221218161836.933697-1-sashal@kernel.org>
@ 2022-12-18 16:18 ` Sasha Levin
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 03/30] wifi: ath9k: verify the expected usb_endpoints are present Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2022-12-18 16:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wright Feng, Chi-hsien Lin, Ian Lin, Kalle Valo, Sasha Levin,
aspriel, franky.lin, hante.meuleman, davem, edumazet, kuba,
pabeni, marcan, linus.walleij, rmk+kernel, soontak.lee, alep,
linux-wireless, brcm80211-dev-list.pdl, SHA-cyfmac-dev-list,
netdev
From: Wright Feng <wright.feng@cypress.com>
[ Upstream commit 2aca4f3734bd717e04943ddf340d49ab62299a00 ]
When firmware hit trap at initialization, host will read abnormal
max_flowrings number from dongle, and it will cause kernel panic when
doing iowrite to initialize dongle ring.
To detect this error at early stage, we directly return error when getting
invalid max_flowrings(>256).
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index b5d2e5b9f67c..8d4512c7181e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1109,6 +1109,10 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
BRCMF_NROF_H2D_COMMON_MSGRINGS;
max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
}
+ if (max_flowrings > 256) {
+ brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
+ return -EIO;
+ }
if (devinfo->dma_idx_sz != 0) {
bufsz = (max_submissionrings + max_completionrings) *
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 5.4 03/30] wifi: ath9k: verify the expected usb_endpoints are present
[not found] <20221218161836.933697-1-sashal@kernel.org>
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 02/30] brcmfmac: return error when getting invalid max_flowrings from dongle Sasha Levin
@ 2022-12-18 16:18 ` Sasha Levin
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 04/30] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out Sasha Levin
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 10/30] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2022-12-18 16:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Fedor Pchelkin, Alan Stern, Alexey Khoroshilov,
Toke Høiland-Jørgensen, Kalle Valo, Sasha Levin, kvalo,
davem, edumazet, kuba, pabeni, linux-wireless, netdev
From: Fedor Pchelkin <pchelkin@ispras.ru>
[ Upstream commit 16ef02bad239f11f322df8425d302be62f0443ce ]
The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
kthread+0x3b4/0x4a0 kernel/kthread.c:313
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index c8c7afe0e343..fddfab6b35da 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1330,10 +1330,24 @@ static int send_eject_command(struct usb_interface *interface)
static int ath9k_hif_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt;
struct hif_device_usb *hif_dev;
int ret = 0;
+ /* Verify the expected endpoints are present */
+ alt = interface->cur_altsetting;
+ if (usb_find_common_endpoints(alt, &bulk_in, &bulk_out, &int_in, &int_out) < 0 ||
+ usb_endpoint_num(bulk_in) != USB_WLAN_RX_PIPE ||
+ usb_endpoint_num(bulk_out) != USB_WLAN_TX_PIPE ||
+ usb_endpoint_num(int_in) != USB_REG_IN_PIPE ||
+ usb_endpoint_num(int_out) != USB_REG_OUT_PIPE) {
+ dev_err(&udev->dev,
+ "ath9k_htc: Device endpoint numbers are not the expected ones\n");
+ return -ENODEV;
+ }
+
if (id->driver_info == STORAGE_DEVICE)
return send_eject_command(interface);
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 5.4 04/30] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
[not found] <20221218161836.933697-1-sashal@kernel.org>
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 02/30] brcmfmac: return error when getting invalid max_flowrings from dongle Sasha Levin
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 03/30] wifi: ath9k: verify the expected usb_endpoints are present Sasha Levin
@ 2022-12-18 16:18 ` Sasha Levin
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 10/30] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2022-12-18 16:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Shigeru Yoshida, syzbot+95001b1fd6dfcc716c29, Kalle Valo,
Sasha Levin, pontus.fuchs, kvalo, davem, edumazet, kuba, pabeni,
linux-wireless, netdev
From: Shigeru Yoshida <syoshida@redhat.com>
[ Upstream commit b6702a942a069c2a975478d719e98d83cdae1797 ]
syzkaller reported use-after-free with the stack trace like below [1]:
[ 38.960489][ C3] ==================================================================
[ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[ 38.966363][ C3]
[ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 38.969959][ C3] Call Trace:
[ 38.970841][ C3] <IRQ>
[ 38.971663][ C3] dump_stack_lvl+0xfc/0x174
[ 38.972620][ C3] print_report.cold+0x2c3/0x752
[ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.974644][ C3] kasan_report+0xb1/0x1d0
[ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240
[ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0
[ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430
[ 38.981266][ C3] dummy_timer+0x140c/0x34e0
[ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0
[ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.986242][ C3] ? lock_release+0x51c/0x790
[ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70
[ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130
[ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 38.990777][ C3] ? lock_acquire+0x472/0x550
[ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.993138][ C3] ? lock_acquire+0x472/0x550
[ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230
[ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0
[ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0
[ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0
[ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0
[ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0
[ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10
[ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40
[ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0
[ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0
[ 39.016196][ C3] __do_softirq+0x1d2/0x9be
[ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190
[ 39.019004][ C3] irq_exit_rcu+0x5/0x20
[ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0
[ 39.021965][ C3] </IRQ>
[ 39.023237][ C3] <TASK>
In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):
ar5523_probe()
-> ar5523_host_available()
-> ar5523_cmd_read()
-> ar5523_cmd()
If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb()
might touch the freed structure.
This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out.
Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1]
Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 58e189ec672f..5d3cf354f6cb 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -241,6 +241,11 @@ static void ar5523_cmd_tx_cb(struct urb *urb)
}
}
+static void ar5523_cancel_tx_cmd(struct ar5523 *ar)
+{
+ usb_kill_urb(ar->tx_cmd.urb_tx);
+}
+
static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
int ilen, void *odata, int olen, int flags)
{
@@ -280,6 +285,7 @@ static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
}
if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+ ar5523_cancel_tx_cmd(ar);
cmd->odata = NULL;
ar5523_err(ar, "timeout waiting for command %02x reply\n",
code);
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 5.4 10/30] wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
[not found] <20221218161836.933697-1-sashal@kernel.org>
` (2 preceding siblings ...)
2022-12-18 16:18 ` [PATCH AUTOSEL 5.4 04/30] wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out Sasha Levin
@ 2022-12-18 16:18 ` Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2022-12-18 16:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Minsuk Kang, Dokyung Song, Jisoo Jang, Kalle Valo, Sasha Levin,
aspriel, franky.lin, hante.meuleman, davem, edumazet, kuba,
pabeni, marcan, alsi, rmk+kernel, linus.walleij, phil, ardb,
wsa+renesas, linux-wireless, brcm80211-dev-list.pdl,
SHA-cyfmac-dev-list, netdev
From: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
[ Upstream commit 81d17f6f3331f03c8eafdacea68ab773426c1e3c ]
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? process_one_work+0x13e0/0x13e0
kthread+0x379/0x450
? _raw_spin_unlock_irq+0x24/0x30
? set_kthread_struct+0x100/0x100
ret_from_fork+0x1f/0x30
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 544ad80629a9..47e33fe53eeb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -703,6 +703,11 @@ brcmf_fw_alloc_request(u32 chip, u32 chiprev,
u32 i, j;
char end = '\0';
+ if (chiprev >= BITS_PER_TYPE(u32)) {
+ brcmf_err("Invalid chip revision %u\n", chiprev);
+ return NULL;
+ }
+
for (i = 0; i < table_size; i++) {
if (mapping_table[i].chipid == chip &&
mapping_table[i].revmask & BIT(chiprev))
--
2.35.1
^ permalink raw reply related [flat|nested] 4+ messages in thread