[PATCH AUTOSEL 6.3 47/67] wifi: mac80211: recalc chanctx mindef before assigning

[Sasha Levin <sashal@kernel.org>]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 04312de4ced4b152749614e8179f3978a20a992f ]

When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning.  Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.

Fix this by calculating the mindef with the new link considered
before calling the driver.

In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-5-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/chan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 1b182cf9d6610..77c90ed8f5d7d 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -871,6 +871,9 @@ static int ieee80211_assign_link_chanctx(struct ieee80211_link_data *link,
 	}
 
 	if (new_ctx) {
+		/* recalc considering the link we'll use it for now */
+		ieee80211_recalc_chanctx_min_def(local, new_ctx, link);
+
 		ret = drv_assign_vif_chanctx(local, sdata, link->conf, new_ctx);
 		if (ret)
 			goto out;
-- 
2.39.2