From: "Jérôme Pouiller" <jerome.pouiller@silabs.com>
To: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
"Jérôme Pouiller" <jerome.pouiller@silabs.com>
Subject: [PATCH v3 8/8] wifi: wfx: implement wfx_remain_on_channel()
Date: Wed, 4 Oct 2023 19:28:43 +0200 [thread overview]
Message-ID: <20231004172843.195332-9-jerome.pouiller@silabs.com> (raw)
In-Reply-To: <20231004172843.195332-1-jerome.pouiller@silabs.com>
With some conditions, the device is able to send/receive frames during
scan operation. So, it is possible to use it implement the "remain on
channel" feature. We just ask for a passive scan (without sending any
probe request) on one channel.
This architecture allows to leverage some interesting features:
- if the device is AP, the device switches channel just after the next
beacon and the beacons are stopped during the off-channel interval.
- if the device is connected, it advertises it is asleep before to
switch channel (so the AP should stop to try to send data)
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
drivers/net/wireless/silabs/wfx/main.c | 3 ++
drivers/net/wireless/silabs/wfx/scan.c | 62 ++++++++++++++++++++++++++
drivers/net/wireless/silabs/wfx/scan.h | 6 +++
drivers/net/wireless/silabs/wfx/sta.c | 1 +
drivers/net/wireless/silabs/wfx/wfx.h | 5 ++-
5 files changed, 76 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/silabs/wfx/main.c b/drivers/net/wireless/silabs/wfx/main.c
index 4bf16bceb0bbc..e7198520bdffc 100644
--- a/drivers/net/wireless/silabs/wfx/main.c
+++ b/drivers/net/wireless/silabs/wfx/main.c
@@ -151,6 +151,8 @@ static const struct ieee80211_ops wfx_ops = {
.change_chanctx = wfx_change_chanctx,
.assign_vif_chanctx = wfx_assign_vif_chanctx,
.unassign_vif_chanctx = wfx_unassign_vif_chanctx,
+ .remain_on_channel = wfx_remain_on_channel,
+ .cancel_remain_on_channel = wfx_cancel_remain_on_channel,
};
bool wfx_api_older_than(struct wfx_dev *wdev, int major, int minor)
@@ -289,6 +291,7 @@ struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_da
hw->wiphy->features |= NL80211_FEATURE_AP_SCAN;
hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ hw->wiphy->max_remain_on_channel_duration = 5000;
hw->wiphy->max_ap_assoc_sta = HIF_LINK_ID_MAX;
hw->wiphy->max_scan_ssids = 2;
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
diff --git a/drivers/net/wireless/silabs/wfx/scan.c b/drivers/net/wireless/silabs/wfx/scan.c
index d6f98035f6844..c3c103ff88cce 100644
--- a/drivers/net/wireless/silabs/wfx/scan.c
+++ b/drivers/net/wireless/silabs/wfx/scan.c
@@ -145,3 +145,65 @@ void wfx_scan_complete(struct wfx_vif *wvif, int nb_chan_done)
wvif->scan_nb_chan_done = nb_chan_done;
complete(&wvif->scan_complete);
}
+
+void wfx_remain_on_channel_work(struct work_struct *work)
+{
+ struct wfx_vif *wvif = container_of(work, struct wfx_vif, remain_on_channel_work);
+ struct ieee80211_channel *chan = wvif->remain_on_channel_chan;
+ int duration = wvif->remain_on_channel_duration;
+ int ret;
+
+ /* Hijack scan request to implement Remain-On-Channel */
+ mutex_lock(&wvif->wdev->conf_mutex);
+ mutex_lock(&wvif->wdev->scan_lock);
+ if (wvif->join_in_progress) {
+ dev_info(wvif->wdev->dev, "abort in-progress REQ_JOIN");
+ wfx_reset(wvif);
+ }
+ wfx_tx_flush(wvif->wdev);
+
+ reinit_completion(&wvif->scan_complete);
+ ret = wfx_hif_scan_uniq(wvif, chan, duration);
+ if (ret)
+ goto end;
+ ieee80211_ready_on_channel(wvif->wdev->hw);
+ ret = wait_for_completion_timeout(&wvif->scan_complete,
+ msecs_to_jiffies(duration * 120 / 100));
+ if (!ret) {
+ wfx_hif_stop_scan(wvif);
+ ret = wait_for_completion_timeout(&wvif->scan_complete, 1 * HZ);
+ dev_dbg(wvif->wdev->dev, "roc timeout\n");
+ }
+ if (!ret)
+ dev_err(wvif->wdev->dev, "roc didn't stop\n");
+ ieee80211_remain_on_channel_expired(wvif->wdev->hw);
+end:
+ mutex_unlock(&wvif->wdev->scan_lock);
+ mutex_unlock(&wvif->wdev->conf_mutex);
+ wfx_bh_request_tx(wvif->wdev);
+}
+
+int wfx_remain_on_channel(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_channel *chan, int duration,
+ enum ieee80211_roc_type type)
+{
+ struct wfx_dev *wdev = hw->priv;
+ struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
+
+ if (wfx_api_older_than(wdev, 3, 10))
+ return -EOPNOTSUPP;
+
+ wvif->remain_on_channel_duration = duration;
+ wvif->remain_on_channel_chan = chan;
+ schedule_work(&wvif->remain_on_channel_work);
+ return 0;
+}
+
+int wfx_cancel_remain_on_channel(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ struct wfx_vif *wvif = (struct wfx_vif *)vif->drv_priv;
+
+ wfx_hif_stop_scan(wvif);
+ flush_work(&wvif->remain_on_channel_work);
+ return 0;
+}
diff --git a/drivers/net/wireless/silabs/wfx/scan.h b/drivers/net/wireless/silabs/wfx/scan.h
index 78e3b984f375c..995ab8c6cb5ef 100644
--- a/drivers/net/wireless/silabs/wfx/scan.h
+++ b/drivers/net/wireless/silabs/wfx/scan.h
@@ -19,4 +19,10 @@ int wfx_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
void wfx_cancel_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
void wfx_scan_complete(struct wfx_vif *wvif, int nb_chan_done);
+void wfx_remain_on_channel_work(struct work_struct *work);
+int wfx_remain_on_channel(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_channel *chan, int duration,
+ enum ieee80211_roc_type type);
+int wfx_cancel_remain_on_channel(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+
#endif
diff --git a/drivers/net/wireless/silabs/wfx/sta.c b/drivers/net/wireless/silabs/wfx/sta.c
index 8533bad6caeae..1b6c158457b42 100644
--- a/drivers/net/wireless/silabs/wfx/sta.c
+++ b/drivers/net/wireless/silabs/wfx/sta.c
@@ -728,6 +728,7 @@ int wfx_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
init_completion(&wvif->scan_complete);
INIT_WORK(&wvif->scan_work, wfx_hw_scan_work);
+ INIT_WORK(&wvif->remain_on_channel_work, wfx_remain_on_channel_work);
wfx_tx_queues_init(wvif);
wfx_tx_policy_init(wvif);
diff --git a/drivers/net/wireless/silabs/wfx/wfx.h b/drivers/net/wireless/silabs/wfx/wfx.h
index a41b2c35fa415..bd0df2e1ea990 100644
--- a/drivers/net/wireless/silabs/wfx/wfx.h
+++ b/drivers/net/wireless/silabs/wfx/wfx.h
@@ -70,6 +70,7 @@ struct wfx_vif {
bool after_dtim_tx_allowed;
bool join_in_progress;
+ struct completion set_pm_mode_complete;
struct delayed_work beacon_loss_work;
@@ -87,7 +88,9 @@ struct wfx_vif {
bool scan_abort;
struct ieee80211_scan_request *scan_req;
- struct completion set_pm_mode_complete;
+ struct ieee80211_channel *remain_on_channel_chan;
+ int remain_on_channel_duration;
+ struct work_struct remain_on_channel_work;
};
static inline struct ieee80211_vif *wvif_to_vif(struct wfx_vif *wvif)
--
2.39.2
prev parent reply other threads:[~2023-10-04 17:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 17:28 [PATCH v3 0/8] wfx: implement Remain On Channel Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 1/8] wifi: wfx: fix power_save setting when AP is stopped Jérôme Pouiller
2023-10-09 6:53 ` Kalle Valo
2023-10-04 17:28 ` [PATCH v3 2/8] wifi: wfx: relocate wfx_rate_mask_to_hw() Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 3/8] wifi: wfx: move wfx_skb_*() out of the header file Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 4/8] wifi: wfx: introduce hif_scan_uniq() Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 5/8] wifi: wfx: simplify exclusion between scan and Rx filters Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 6/8] wifi: wfx: scan_lock is global to the device Jérôme Pouiller
2023-10-04 17:28 ` [PATCH v3 7/8] wifi: wfx: allow to send frames during ROC Jérôme Pouiller
2024-11-26 7:27 ` Sverdlin, Alexander
2024-11-26 14:45 ` Jérôme Pouiller
2024-11-26 15:41 ` Sverdlin, Alexander
2024-11-26 15:54 ` Sverdlin, Alexander
2024-11-27 9:18 ` Jérôme Pouiller
2023-10-04 17:28 ` Jérôme Pouiller [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231004172843.195332-9-jerome.pouiller@silabs.com \
--to=jerome.pouiller@silabs.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox