linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shayne Chen <shayne.chen@mediatek.com>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	Ryder Lee <ryder.lee@mediatek.com>,
	Evelyn Tsai <evelyn.tsai@mediatek.com>,
	Bo Jiao <Bo.Jiao@mediatek.com>,
	linux-mediatek <linux-mediatek@lists.infradead.org>,
	Shayne Chen <shayne.chen@mediatek.com>
Subject: [PATCH 10/12] wifi: mt76: mt7996: add locking for accessing mapped registers
Date: Fri, 19 Jan 2024 16:57:06 +0800	[thread overview]
Message-ID: <20240119085708.23592-10-shayne.chen@mediatek.com> (raw)
In-Reply-To: <20240119085708.23592-1-shayne.chen@mediatek.com>

A race condition was observed when accessing mapped registers, so add
locking to protect against concurrent access.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7996/mmio.c  | 64 ++++++++++++-------
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  3 +-
 2 files changed, 43 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
index c50d89a445e9..ff6a335e1fa7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
@@ -140,7 +140,6 @@ static u32 mt7996_reg_map_l1(struct mt7996_dev *dev, u32 addr)
 	u32 offset = FIELD_GET(MT_HIF_REMAP_L1_OFFSET, addr);
 	u32 base = FIELD_GET(MT_HIF_REMAP_L1_BASE, addr);
 
-	dev->reg_l1_backup = dev->bus_ops->rr(&dev->mt76, MT_HIF_REMAP_L1);
 	dev->bus_ops->rmw(&dev->mt76, MT_HIF_REMAP_L1,
 			  MT_HIF_REMAP_L1_MASK,
 			  FIELD_PREP(MT_HIF_REMAP_L1_MASK, base));
@@ -155,7 +154,6 @@ static u32 mt7996_reg_map_l2(struct mt7996_dev *dev, u32 addr)
 	u32 offset = FIELD_GET(MT_HIF_REMAP_L2_OFFSET, addr);
 	u32 base = FIELD_GET(MT_HIF_REMAP_L2_BASE, addr);
 
-	dev->reg_l2_backup = dev->bus_ops->rr(&dev->mt76, MT_HIF_REMAP_L2);
 	dev->bus_ops->rmw(&dev->mt76, MT_HIF_REMAP_L2,
 			  MT_HIF_REMAP_L2_MASK,
 			  FIELD_PREP(MT_HIF_REMAP_L2_MASK, base));
@@ -165,26 +163,10 @@ static u32 mt7996_reg_map_l2(struct mt7996_dev *dev, u32 addr)
 	return MT_HIF_REMAP_BASE_L2 + offset;
 }
 
-static void mt7996_reg_remap_restore(struct mt7996_dev *dev)
-{
-	/* remap to ori status */
-	if (unlikely(dev->reg_l1_backup)) {
-		dev->bus_ops->wr(&dev->mt76, MT_HIF_REMAP_L1, dev->reg_l1_backup);
-		dev->reg_l1_backup = 0;
-	}
-
-	if (dev->reg_l2_backup) {
-		dev->bus_ops->wr(&dev->mt76, MT_HIF_REMAP_L2, dev->reg_l2_backup);
-		dev->reg_l2_backup = 0;
-	}
-}
-
 static u32 __mt7996_reg_addr(struct mt7996_dev *dev, u32 addr)
 {
 	int i;
 
-	mt7996_reg_remap_restore(dev);
-
 	if (addr < 0x100000)
 		return addr;
 
@@ -201,6 +183,11 @@ static u32 __mt7996_reg_addr(struct mt7996_dev *dev, u32 addr)
 		return dev->reg.map[i].mapped + ofs;
 	}
 
+	return 0;
+}
+
+static u32 __mt7996_reg_remap_addr(struct mt7996_dev *dev, u32 addr)
+{
 	if ((addr >= MT_INFRA_BASE && addr < MT_WFSYS0_PHY_START) ||
 	    (addr >= MT_WFSYS0_PHY_START && addr < MT_WFSYS1_PHY_START) ||
 	    (addr >= MT_WFSYS1_PHY_START && addr <= MT_WFSYS1_PHY_END))
@@ -225,28 +212,60 @@ void mt7996_memcpy_fromio(struct mt7996_dev *dev, void *buf, u32 offset,
 {
 	u32 addr = __mt7996_reg_addr(dev, offset);
 
-	memcpy_fromio(buf, dev->mt76.mmio.regs + addr, len);
+	if (addr) {
+		memcpy_fromio(buf, dev->mt76.mmio.regs + addr, len);
+		return;
+	}
+
+	spin_lock_bh(&dev->reg_lock);
+	memcpy_fromio(buf, dev->mt76.mmio.regs +
+			   __mt7996_reg_remap_addr(dev, offset), len);
+	spin_unlock_bh(&dev->reg_lock);
 }
 
 static u32 mt7996_rr(struct mt76_dev *mdev, u32 offset)
 {
 	struct mt7996_dev *dev = container_of(mdev, struct mt7996_dev, mt76);
+	u32 addr = __mt7996_reg_addr(dev, offset), val;
+
+	if (addr)
+		return dev->bus_ops->rr(mdev, addr);
 
-	return dev->bus_ops->rr(mdev, __mt7996_reg_addr(dev, offset));
+	spin_lock_bh(&dev->reg_lock);
+	val = dev->bus_ops->rr(mdev, __mt7996_reg_remap_addr(dev, offset));
+	spin_unlock_bh(&dev->reg_lock);
+
+	return val;
 }
 
 static void mt7996_wr(struct mt76_dev *mdev, u32 offset, u32 val)
 {
 	struct mt7996_dev *dev = container_of(mdev, struct mt7996_dev, mt76);
+	u32 addr = __mt7996_reg_addr(dev, offset);
 
-	dev->bus_ops->wr(mdev, __mt7996_reg_addr(dev, offset), val);
+	if (addr) {
+		dev->bus_ops->wr(mdev, addr, val);
+		return;
+	}
+
+	spin_lock_bh(&dev->reg_lock);
+	dev->bus_ops->wr(mdev, __mt7996_reg_remap_addr(dev, offset), val);
+	spin_unlock_bh(&dev->reg_lock);
 }
 
 static u32 mt7996_rmw(struct mt76_dev *mdev, u32 offset, u32 mask, u32 val)
 {
 	struct mt7996_dev *dev = container_of(mdev, struct mt7996_dev, mt76);
+	u32 addr = __mt7996_reg_addr(dev, offset);
+
+	if (addr)
+		return dev->bus_ops->rmw(mdev, addr, mask, val);
+
+	spin_lock_bh(&dev->reg_lock);
+	val = dev->bus_ops->rmw(mdev, __mt7996_reg_remap_addr(dev, offset), mask, val);
+	spin_unlock_bh(&dev->reg_lock);
 
-	return dev->bus_ops->rmw(mdev, __mt7996_reg_addr(dev, offset), mask, val);
+	return val;
 }
 
 #ifdef CONFIG_NET_MEDIATEK_SOC_WED
@@ -421,6 +440,7 @@ static int mt7996_mmio_init(struct mt76_dev *mdev,
 
 	dev = container_of(mdev, struct mt7996_dev, mt76);
 	mt76_mmio_init(&dev->mt76, mem_base);
+	spin_lock_init(&dev->reg_lock);
 
 	switch (device_id) {
 	case 0x7990:
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 8154ad37827f..36d1f247d55a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -325,8 +325,7 @@ struct mt7996_dev {
 		u8 n_agrt;
 	} twt;
 
-	u32 reg_l1_backup;
-	u32 reg_l2_backup;
+	spinlock_t reg_lock;
 
 	u8 wtbl_size_group;
 };
-- 
2.39.2


  parent reply	other threads:[~2024-01-19  8:57 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-19  8:56 [PATCH 01/12] wifi: mt76: mt7996: check txs format before getting skb by pid Shayne Chen
2024-01-19  8:56 ` [PATCH 02/12] wifi: mt76: mt7996: fix TWT issues Shayne Chen
2024-01-19  8:56 ` [PATCH 03/12] wifi: mt76: mt7996: disable AMSDU for non-data frames Shayne Chen
2024-01-19  8:57 ` [PATCH 04/12] wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps Shayne Chen
2024-01-23 11:16   ` Kalle Valo
2024-01-23 14:47     ` Felix Fietkau
2024-01-19  8:57 ` [PATCH 05/12] wifi: mt76: mt7996: ensure 4-byte alignment for beacon commands Shayne Chen
2024-01-19  8:57 ` [PATCH 06/12] wifi: mt76: mt7996: fix HE beamformer phy cap for station vif Shayne Chen
2024-01-19  8:57 ` [PATCH 07/12] wifi: mt76: mt7996: mark GCMP IGTK unsupported Shayne Chen
2024-01-19  8:57 ` [PATCH 08/12] wifi: mt76: mt7996: fix efuse reading issue Shayne Chen
2024-01-19  8:57 ` [PATCH 09/12] wifi: mt76: mt7996: remove TXS queue setting Shayne Chen
2024-01-19  8:57 ` Shayne Chen [this message]
2024-01-19  8:57 ` [PATCH 11/12] wifi: mt76: connac: set correct muar_idx for mt799x chipsets Shayne Chen
2024-01-23 11:13   ` Kalle Valo
2024-01-19  8:57 ` [PATCH 12/12] wifi: mt76: mt7996: fix HIF_TXD_V2_1 value Shayne Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240119085708.23592-10-shayne.chen@mediatek.com \
    --to=shayne.chen@mediatek.com \
    --cc=Bo.Jiao@mediatek.com \
    --cc=evelyn.tsai@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=nbd@nbd.name \
    --cc=ryder.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).