linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: linux-kernel@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
	Kalle Valo <kvalo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>, linux-wireless@vger.kernel.org
Subject: [PATCH 21/34] iwlegacy: don't warn for unused variables with DEBUG_FS=n
Date: Wed,  3 Apr 2024 10:06:39 +0200	[thread overview]
Message-ID: <20240403080702.3509288-22-arnd@kernel.org> (raw)
In-Reply-To: <20240403080702.3509288-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

The reference to il_rate_mcs is inside of an #ifdef, causing a W=1 warning:

drivers/net/wireless/intel/iwlegacy/4965-rs.c:189:38: error: unused variable 'il_rate_mcs' [-Werror,-Wunused-const-variable]
static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {

Replace the #ifdef with a PTR_IF() for better compile time analysis.
The dead code will still get eliminated, but the warning goes away.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/wireless/intel/iwlegacy/4965-rs.c | 15 ++-------------
 drivers/net/wireless/intel/iwlegacy/common.h  |  2 --
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlegacy/4965-rs.c b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
index 718efb1aa1b0..1aa2cee5d131 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
@@ -132,15 +132,8 @@ static void il4965_rs_fill_link_cmd(struct il_priv *il,
 static void il4965_rs_stay_in_table(struct il_lq_sta *lq_sta,
 				    bool force_search);
 
-#ifdef CONFIG_MAC80211_DEBUGFS
 static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta,
 				    u32 *rate_n_flags, int idx);
-#else
-static void
-il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
-{
-}
-#endif
 
 /*
  * The following tables contain the expected throughput metrics for all rates
@@ -2495,8 +2488,6 @@ il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta)
 	D_RATE("leave\n");
 }
 
-#ifdef CONFIG_MAC80211_DEBUGFS
-
 static void
 il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
 {
@@ -2758,7 +2749,6 @@ il4965_rs_add_debugfs(void *il, void *il_sta, struct dentry *dir)
 	debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
 			  &lq_sta->tx_agg_tid_en);
 }
-#endif
 
 /*
  * Initialization of rate scaling information is done by driver after
@@ -2781,9 +2771,8 @@ static const struct rate_control_ops rs_4965_ops = {
 	.free = il4965_rs_free,
 	.alloc_sta = il4965_rs_alloc_sta,
 	.free_sta = il4965_rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
-	.add_sta_debugfs = il4965_rs_add_debugfs,
-#endif
+	.add_sta_debugfs = PTR_IF(IS_ENABLED(CONFIG_DEBUG_FS),
+				  il4965_rs_add_debugfs),
 };
 
 int
diff --git a/drivers/net/wireless/intel/iwlegacy/common.h b/drivers/net/wireless/intel/iwlegacy/common.h
index 69687fcf963f..b9f1daf0901b 100644
--- a/drivers/net/wireless/intel/iwlegacy/common.h
+++ b/drivers/net/wireless/intel/iwlegacy/common.h
@@ -2804,9 +2804,7 @@ struct il_lq_sta {
 	struct il_scale_tbl_info lq_info[LQ_SIZE];	/* "active", "search" */
 	struct il_traffic_load load[TID_MAX_LOAD_COUNT];
 	u8 tx_agg_tid_en;
-#ifdef CONFIG_MAC80211_DEBUGFS
 	u32 dbg_fixed_rate;
-#endif
 	struct il_priv *drv;
 
 	/* used to be in sta_info */
-- 
2.39.2


  reply	other threads:[~2024-04-03  8:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-03  8:06 [PATCH 00/34] address all -Wunused-const warnings Arnd Bergmann
2024-04-03  8:06 ` Arnd Bergmann [this message]
2024-04-03  9:33   ` [PATCH 21/34] iwlegacy: don't warn for unused variables with DEBUG_FS=n Andy Shevchenko
2024-04-03 14:26   ` Jeff Johnson
2024-04-06  5:20 ` [PATCH 00/34] address all -Wunused-const warnings patchwork-bot+netdevbpf
2024-04-10  8:02 ` (subset) " Sebastian Reichel
2024-04-22  8:16 ` Michael Ellerman
2025-01-27 13:24 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240403080702.3509288-22-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=arnd@arndb.de \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=stf_xl@wp.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).