[PATCH AUTOSEL 5.15 08/21] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata

[PATCH AUTOSEL 5.15 08/21] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata

[Sasha Levin]

From: Nicolas Escande <nico.escande@gmail.com>

[ Upstream commit 6f6291f09a322c1c1578badac8072d049363f4e6 ]

With a ath9k device I can see that:
	iw phy phy0 interface add mesh0 type mp
	ip link set mesh0 up
	iw dev mesh0 scan

Will start a scan with the Power Management bit set in the Frame Control Field.
This is because we set this bit depending on the nonpeer_pm variable of the mesh
iface sdata and when there are no active links on the interface it remains to
NL80211_MESH_POWER_UNKNOWN.

As soon as links starts to be established, it wil switch to
NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta
nonpeer_pm field.
As we want no power save by default, (as expressed with the per sta ini values),
lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.

Also please note that we cannot change the default value from userspace prior to
establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before
NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 6847fdf934392..6202157f467b1 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1628,6 +1628,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	ifmsh->last_preq = jiffies;
 	ifmsh->next_perr = jiffies;
 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
+	ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
 	/* Allocate all mesh structures when creating the first mesh interface. */
 	if (!mesh_allocated)
 		ieee80211s_init();
-- 
2.43.0

[PATCH AUTOSEL 5.15 09/21] wifi: mac80211: handle tasklet frames before stopping

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 177c6ae9725d783f9e96f02593ce8fb2639be22f ]

The code itself doesn't want to handle frames from the driver
if it's already stopped, but if the tasklet was queued before
and runs after the stop, then all bets are off. Flush queues
before actually stopping, RX should be off at this point since
all the interfaces are removed already, etc.

Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com
Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h |  2 ++
 net/mac80211/main.c        | 10 ++++++++--
 net/mac80211/util.c        |  2 ++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 03f8c8bdab765..03c238e68038b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1803,6 +1803,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 void ieee80211_configure_filter(struct ieee80211_local *local);
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
 
+void ieee80211_handle_queued_frames(struct ieee80211_local *local);
+
 u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local);
 int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 			     u64 *cookie, gfp_t gfp);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 9617ff8e27147..7d62374fe727b 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -220,9 +220,8 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 	       BSS_CHANGED_ERP_SLOT;
 }
 
-static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+void ieee80211_handle_queued_frames(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
 	struct sk_buff *skb;
 
 	while ((skb = skb_dequeue(&local->skb_queue)) ||
@@ -247,6 +246,13 @@ static void ieee80211_tasklet_handler(struct tasklet_struct *t)
 	}
 }
 
+static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+{
+	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
+
+	ieee80211_handle_queued_frames(local);
+}
+
 static void ieee80211_restart_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 354badd32793a..3d47c2dba39da 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2146,6 +2146,8 @@ u32 ieee80211_sta_get_rates(struct ieee80211_sub_if_data *sdata,
 
 void ieee80211_stop_device(struct ieee80211_local *local)
 {
+	ieee80211_handle_queued_frames(local);
+
 	ieee80211_led_radio(local, false);
 	ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 10/21] wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup

[Sasha Levin]

From: Yedidya Benshimol <yedidya.ben.shimol@intel.com>

[ Upstream commit b7ffca99313d856f7d1cc89038d9061b128e8e97 ]

After moving from commands to notificaitons in the d3 resume flow,
removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes
the return of the default value when looking up their version.
Returning zero here results in the driver sending the not supported
NON_QOS_TX_COUNTER_CMD.

Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index c4c62bcbe67de..f9b004d139501 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -1796,7 +1796,8 @@ static bool iwl_mvm_setup_connection_keep(struct iwl_mvm *mvm,
 
 out:
 	if (iwl_fw_lookup_notif_ver(mvm->fw, LONG_GROUP,
-				    WOWLAN_GET_STATUSES, 0) < 10) {
+				    WOWLAN_GET_STATUSES,
+				    IWL_FW_CMD_VER_UNKNOWN) < 10) {
 		mvmvif->seqno_valid = true;
 		/* +0x10 because the set API expects next-to-use, not last-used */
 		mvmvif->seqno = le16_to_cpu(status->non_qos_seq_ctr) + 0x10;
-- 
2.43.0

[PATCH AUTOSEL 5.15 11/21] wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd

[Sasha Levin]

From: Yedidya Benshimol <yedidya.ben.shimol@intel.com>

[ Upstream commit 08b16d1b5997dc378533318e2a9cd73c7a898284 ]

The BIGTK cipher field was added to the kek_kck_material_cmd
but wasn't assigned. Fix that by differentiating between the
IGTK/BIGTK keys and assign the ciphers fields accordingly.

Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index f9b004d139501..24c1666b2c88a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -595,16 +595,25 @@ static void iwl_mvm_wowlan_gtk_type_iter(struct ieee80211_hw *hw,
 					 void *_data)
 {
 	struct wowlan_key_gtk_type_iter *data = _data;
+	__le32 *cipher = NULL;
+
+	if (key->keyidx == 4 || key->keyidx == 5)
+		cipher = &data->kek_kck_cmd->igtk_cipher;
+	if (key->keyidx == 6 || key->keyidx == 7)
+		cipher = &data->kek_kck_cmd->bigtk_cipher;
 
 	switch (key->cipher) {
 	default:
 		return;
 	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
 	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
-		data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_GCMP);
+		if (cipher)
+			*cipher = cpu_to_le32(STA_KEY_FLG_GCMP);
 		return;
 	case WLAN_CIPHER_SUITE_AES_CMAC:
-		data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_CCM);
+	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
+		if (cipher)
+			*cipher = cpu_to_le32(STA_KEY_FLG_CCM);
 		return;
 	case WLAN_CIPHER_SUITE_CCMP:
 		if (!sta)
-- 
2.43.0

[PATCH AUTOSEL 5.15 12/21] wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option

[Sasha Levin]

From: Ayala Beker <ayala.beker@intel.com>

[ Upstream commit 989830d1cf16bd149bf0690d889a9caef95fb5b1 ]

Ensure that the 6 GHz channel is configured with a valid direct BSSID,
avoiding any invalid or multicast BSSID addresses.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index c0ffa26bc5aaa..0f9016cda31c6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1721,7 +1721,10 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm,
 				break;
 		}
 
-		if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE) {
+		if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE &&
+		    !WARN_ONCE(!is_valid_ether_addr(scan_6ghz_params[j].bssid),
+			       "scan: invalid BSSID at index %u, index_b=%u\n",
+			       j, idex_b)) {
 			memcpy(&pp->bssid_array[idex_b++],
 			       scan_6ghz_params[j].bssid, ETH_ALEN);
 		}
-- 
2.43.0

[PATCH AUTOSEL 5.15 13/21] wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()

[Sasha Levin]

From: Dmitry Antipov <dmantipov@yandex.ru>

[ Upstream commit 92ecbb3ac6f3fe8ae9edf3226c76aa17b6800699 ]

When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've
noticed the following:

UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4
index 0 is out of range for type 'struct ieee80211_channel *[]'
CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1
Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...>
Call Trace:
 <TASK>
 dump_stack_lvl+0x2d/0x90
 __ubsan_handle_out_of_bounds+0xe7/0x140
 ? timerqueue_add+0x98/0xb0
 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211]
 ? __kmalloc+0xe1/0x470
 __ieee80211_start_scan+0x541/0x760 [mac80211]
 rdev_scan+0x1f/0xe0 [cfg80211]
 nl80211_trigger_scan+0x9b6/0xae0 [cfg80211]
 ...<the rest is not too useful...>

Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels'
uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't
be checked in 'ieee80211_prep_hw_scan()'. Although an initialization
of 'hw_scan_req->req.n_channels' introduces some confusion around
allocated vs. used VLA members, this shouldn't be a problem since
everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'.

Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the
convenient 'struct_size()' as well.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru
[improve (imho) indentation a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/scan.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index e692a2487eb5d..3bf3dd4bafa54 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -729,15 +729,21 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 			local->hw_scan_ies_bufsize *= n_bands;
 		}
 
-		local->hw_scan_req = kmalloc(
-				sizeof(*local->hw_scan_req) +
-				req->n_channels * sizeof(req->channels[0]) +
-				local->hw_scan_ies_bufsize, GFP_KERNEL);
+		local->hw_scan_req = kmalloc(struct_size(local->hw_scan_req,
+							 req.channels,
+							 req->n_channels) +
+					     local->hw_scan_ies_bufsize,
+					     GFP_KERNEL);
 		if (!local->hw_scan_req)
 			return -ENOMEM;
 
 		local->hw_scan_req->req.ssids = req->ssids;
 		local->hw_scan_req->req.n_ssids = req->n_ssids;
+		/* None of the channels are actually set
+		 * up but let UBSAN know the boundaries.
+		 */
+		local->hw_scan_req->req.n_channels = req->n_channels;
+
 		ies = (u8 *)local->hw_scan_req +
 			sizeof(*local->hw_scan_req) +
 			req->n_channels * sizeof(req->channels[0]);
-- 
2.43.0

[PATCH AUTOSEL 5.15 09/21] wifi: mac80211: handle tasklet frames before stopping

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 177c6ae9725d783f9e96f02593ce8fb2639be22f ]

The code itself doesn't want to handle frames from the driver
if it's already stopped, but if the tasklet was queued before
and runs after the stop, then all bets are off. Flush queues
before actually stopping, RX should be off at this point since
all the interfaces are removed already, etc.

Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com
Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h |  2 ++
 net/mac80211/main.c        | 10 ++++++++--
 net/mac80211/util.c        |  2 ++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 03f8c8bdab765..03c238e68038b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1803,6 +1803,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 void ieee80211_configure_filter(struct ieee80211_local *local);
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
 
+void ieee80211_handle_queued_frames(struct ieee80211_local *local);
+
 u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local);
 int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 			     u64 *cookie, gfp_t gfp);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 9617ff8e27147..7d62374fe727b 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -220,9 +220,8 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 	       BSS_CHANGED_ERP_SLOT;
 }
 
-static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+void ieee80211_handle_queued_frames(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
 	struct sk_buff *skb;
 
 	while ((skb = skb_dequeue(&local->skb_queue)) ||
@@ -247,6 +246,13 @@ static void ieee80211_tasklet_handler(struct tasklet_struct *t)
 	}
 }
 
+static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+{
+	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
+
+	ieee80211_handle_queued_frames(local);
+}
+
 static void ieee80211_restart_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 354badd32793a..3d47c2dba39da 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2146,6 +2146,8 @@ u32 ieee80211_sta_get_rates(struct ieee80211_sub_if_data *sdata,
 
 void ieee80211_stop_device(struct ieee80211_local *local)
 {
+	ieee80211_handle_queued_frames(local);
+
 	ieee80211_led_radio(local, false);
 	ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
 
-- 
2.43.0