[PATCH 1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022

[PATCH 1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih@realtek.com>

Radiocommunications Regulations (General User Radio Licence for Short Range
Devices) Notice 2022 listed spectrum:

2400.0000 - 2483.5000
  * e.i.r.p. 0 dBW (1 W)

5150.0000 - 5350.0000
 * the maximum power is 0 dBW (1 W) e.i.r.p. and
   the maximum permitted power spectral density is -13 dBW/MHz
   (17 dBm/Hz, 50 mW/MHz) e.i.r.p.
 * 5250 - 5350 MHz, If Transmitter Power Control is not used, then the
   maximum power (e.i.r.p.) value shall be reduced by 3 dB.

5470.0000 - 5725.0000
 * 5470 - 5725 MHz, transmitter peak power must not exceed -6 dBW (250 mW)
   If Transmitter Power Control is not used, then the maximum power
   (e.i.r.p.) value must be reduced by 3 dB.

5725.0000 - 5850.0000
 * 5725 - 5850 MHz, the transmitter peak power must not exceed 0 dBW (1 W)
   and the power spectral density must not exceed 17 dBm/MHz.

5925.0000 - 6425.0000
 * the maximum power is -6 dBW (24 dBm, 250 mW ) e.i.r.p. and
   the maximum permitted power spectral density is -19 dBW/MHz
   (11 dBm/MHz, 12.6 mW/MHz) e.i.r.p. for low power devices.
   Only be used indoors.
 * the maximum power is -16 dBW (14 dBm, 25 mW ) e.i.r.p. and
   the maximum permitted power spectral density is -29 dBW/MHz
   (1 dBm/MHz, 1.26 mW/MHz) e.i.r.p. for very low power devices.
   Very Low Power applications.

57000.0000 - 71000.0000
 * for devices transmitting at 10 dBW e.i.r.p or less,
   the power spectral density must not exceed -7 dBW/MHz e.i.r.p. and
   the maximum transmit power must not exceed -3 dBW at the antenna port
   or ports.
 * for devices transmitting greater than 10 dBW e.i.r.p., the power
   spectral density shall not exceed 8 dBW/MHz e.i.r.p and antennas with
   a gain greater than 30 dBi shall be used.

[1] https://gazette.govt.nz/notice/id/2022-go3100

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 db.txt | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/db.txt b/db.txt
index d7592c299c62..266ba2d48731 100644
--- a/db.txt
+++ b/db.txt
@@ -1416,12 +1416,16 @@ country NP: DFS-JP
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5735 - 5835 @ 80), (20)
 
+# Source:
+# https://gazette.govt.nz/notice/id/2022-go3100
 country NZ: DFS-ETSI
-	(2402 - 2482 @ 40), (30)
-	(5170 - 5250 @ 80), (17), AUTO-BW
-	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
-	(5490 - 5730 @ 160), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(2400 - 2483.5 @ 40), (30)
+	(5150 - 5250 @ 80), (30), AUTO-BW
+	(5250 - 5350 @ 80), (27), DFS, AUTO-BW
+	(5470 - 5730 @ 160), (21), DFS
+	(5725 - 5850 @ 80), (30)
+	(5925 - 6425 @ 320), (24), NO-OUTDOOR
+	(57000 - 71000 @ 2160), (40)
 
 country OM: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
-- 
2.25.1

[PATCH 2/5] wireless-regdb: Update regulatory info for Peru (PE) on 6GHz

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih@realtek.com>

Ministerial Resolution -2021-MTC/01 decided

For the band 5925-7125 MHz, low power indoor case of use.
 - access point
   maximum EIRP: 30 dBm
   Limited power spectral density: 5 dBm / MHz
 - user devices
   maximum EIRP: 24 dBm
   Limited power spectral density: -1 dBm / MHz

[1] https://cdn.www.gob.pe/uploads/document/file/1861732/Resoluci%C3%B3n%20Ministerial%20nro%20373-2021-MTC/01.pdf

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 db.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/db.txt b/db.txt
index 266ba2d48731..2e862b322f13 100644
--- a/db.txt
+++ b/db.txt
@@ -1443,12 +1443,15 @@ country PA: DFS-FCC
 	(5725 - 5850 @ 80), (36)
 	(57000 - 64000 @ 2160), (43)
 
+# Source:
+# https://cdn.www.gob.pe/uploads/document/file/1861732/Resoluci%C3%B3n%20Ministerial%20nro%20373-2021-MTC/01.pdf
 country PE: DFS-FCC
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
 	(5490 - 5730 @ 160), (24), DFS
 	(5735 - 5835 @ 80), (30)
+	(5925 - 7125 @ 320), (12), NO-OUTDOOR
 
 country PF: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
-- 
2.25.1

Re: [PATCH 2/5] wireless-regdb: Update regulatory info for Peru (PE) on 6GHz

[Chen-Yu Tsai]

On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote:
>
> From: Ping-Ke Shih <pkshih@realtek.com>
>
> Ministerial Resolution -2021-MTC/01 decided
>
> For the band 5925-7125 MHz, low power indoor case of use.
>  - access point
>    maximum EIRP: 30 dBm
>    Limited power spectral density: 5 dBm / MHz
>  - user devices
>    maximum EIRP: 24 dBm
>    Limited power spectral density: -1 dBm / MHz

Please explicitly mention that the PSD limits the rule to 12 dBm.

Otherwise this looks good.

ChenYu

> [1] https://cdn.www.gob.pe/uploads/document/file/1861732/Resoluci%C3%B3n%20Ministerial%20nro%20373-2021-MTC/01.pdf
>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
> ---
>  db.txt | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/db.txt b/db.txt
> index 266ba2d48731..2e862b322f13 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -1443,12 +1443,15 @@ country PA: DFS-FCC
>         (5725 - 5850 @ 80), (36)
>         (57000 - 64000 @ 2160), (43)
>
> +# Source:
> +# https://cdn.www.gob.pe/uploads/document/file/1861732/Resoluci%C3%B3n%20Ministerial%20nro%20373-2021-MTC/01.pdf
>  country PE: DFS-FCC
>         (2402 - 2482 @ 40), (20)
>         (5170 - 5250 @ 80), (17), AUTO-BW
>         (5250 - 5330 @ 80), (24), DFS, AUTO-BW
>         (5490 - 5730 @ 160), (24), DFS
>         (5735 - 5835 @ 80), (30)
> +       (5925 - 7125 @ 320), (12), NO-OUTDOOR
>
>  country PF: DFS-ETSI
>         (2402 - 2482 @ 40), (20)
> --
> 2.25.1
>

[PATCH 3/5] wireless-regdb: Update regulatory info for Qatar (QA) on 6GHz

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih@realtek.com>

Communications Regulatory Authority, State of Qatar, released
Class License for the use of RLAN devices over 5925-6425 MHz Band on
26 April 2022 [2] via page [1].

Technical Requirements for the use of RLAN Devices over 5925-6425MHz
 - Low Power
   * e.i.r.p 23 dBm
   * Indoor Use only
 - Very Low Power
   * e.i.r.p 14 dBm
   * Indoor and Outdoor Use

[1] https://www.cra.gov.qa/en/document/class-license-for-the-use-of-rlan-devices-over-5925-6425-mhz-band
[2] https://www.cra.gov.qa/-/media/System/D/2/5/8/D258CF18B83A5613B0D590193CB799CB/Class-License-WIFI-6E-Final-English-032022--V3.ashx

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 db.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/db.txt b/db.txt
index 2e862b322f13..d6b14c055afb 100644
--- a/db.txt
+++ b/db.txt
@@ -1559,12 +1559,15 @@ country PY: DFS-FCC
 	(5490 - 5730 @ 160), (24), DFS
 	(5735 - 5835 @ 80), (30)
 
+# Source:
+# https://www.cra.gov.qa/-/media/System/D/2/5/8/D258CF18B83A5613B0D590193CB799CB/Class-License-WIFI-6E-Final-English-032022--V3.ashx
 country QA: DFS-ETSI
 	(2400 - 2483.5 @ 40), (100 mW), NO-OUTDOOR
 	(5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
 	(5250 - 5350 @ 80), (200 mW), NO-OUTDOOR, DFS, AUTO-BW
 	(5470 - 5725 @ 160), (100 mW), NO-OUTDOOR, DFS
 	(5725 - 5875 @ 80), (100 mW), NO-OUTDOOR, DFS
+	(5925 - 6425 @ 320), (23), NO-OUTDOOR
 	(57000 - 66000 @ 2160), (40), NO-OUTDOOR
 
 country RE: DFS-ETSI
-- 
2.25.1

Re: [PATCH 3/5] wireless-regdb: Update regulatory info for Qatar (QA) on 6GHz

[Chen-Yu Tsai]

On Fri, 05 Jul 2024 14:06:11 +0800, Ping-Ke Shih wrote:
> Communications Regulatory Authority, State of Qatar, released
> Class License for the use of RLAN devices over 5925-6425 MHz Band on
> 26 April 2022 [2] via page [1].
> 
> Technical Requirements for the use of RLAN Devices over 5925-6425MHz
>  - Low Power
>    * e.i.r.p 23 dBm
>    * Indoor Use only
>  - Very Low Power
>    * e.i.r.p 14 dBm
>    * Indoor and Outdoor Use
> 
> [...]

Applied to master in wens/wireless-regdb.git, thanks!

[3/5] wireless-regdb: Update regulatory info for Qatar (QA) on 6GHz
      https://git.kernel.org/wens/wireless-regdb/c/c7d1083bc5c1

Best regards,
-- 
Chen-Yu Tsai <wens@kernel.org>

[PATCH 4/5] wireless-regdb: Update regulatory info for El Salvador (SV) on 6GHz

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih@realtek.com>

The General Superintendency of Electricity and Telecommunications Makes
Knowledge to the General issued resolution No. T-0408-2023.

Free use within the entire band for WLAN (WiFi) application, from
5925 MHz to 7125 MHz, must have following technical and operation
conditions:
 - access point
   * P.I.R.E 30 dBm
   * spectral density of P.I.R.E. 5 dBm/Mhz
 - client
   * P.I.R.E 24 dBm
   * spectral density of P.I.R.E. -1 dBm/Mhz
 - Indoor use only permitted

[1] https://www.siget.gob.sv/actualizacion-de-cuadro-nacional-de-atribucion-de-frecuencias-t-0408-2023/

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 db.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/db.txt b/db.txt
index d6b14c055afb..2a4f1ed524c1 100644
--- a/db.txt
+++ b/db.txt
@@ -1736,11 +1736,14 @@ country SR: DFS-ETSI
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5490 - 5710 @ 160), (27), DFS
 
+# Source:
+# https://www.siget.gob.sv/actualizacion-de-cuadro-nacional-de-atribucion-de-frecuencias-t-0408-2023/
 country SV: DFS-FCC
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 20), (17)
 	(5250 - 5330 @ 20), (23), DFS
 	(5735 - 5835 @ 20), (30)
+	(5925 - 7125 @ 320), (12), NO-OUTDOOR
 
 country SY:
 	(2402 - 2482 @ 40), (20)
-- 
2.25.1

Re: [PATCH 4/5] wireless-regdb: Update regulatory info for El Salvador (SV) on 6GHz

[Chen-Yu Tsai]

On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote:
>
> From: Ping-Ke Shih <pkshih@realtek.com>
>
> The General Superintendency of Electricity and Telecommunications Makes
> Knowledge to the General issued resolution No. T-0408-2023.
>
> Free use within the entire band for WLAN (WiFi) application, from
> 5925 MHz to 7125 MHz, must have following technical and operation
> conditions:
>  - access point
>    * P.I.R.E 30 dBm
>    * spectral density of P.I.R.E. 5 dBm/Mhz
>  - client
>    * P.I.R.E 24 dBm
>    * spectral density of P.I.R.E. -1 dBm/Mhz
>  - Indoor use only permitted

Please explicitly mention that the PSD limits the rule to 12 dBm.

ChenYu

> [1] https://www.siget.gob.sv/actualizacion-de-cuadro-nacional-de-atribucion-de-frecuencias-t-0408-2023/
>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
> ---
>  db.txt | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/db.txt b/db.txt
> index d6b14c055afb..2a4f1ed524c1 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -1736,11 +1736,14 @@ country SR: DFS-ETSI
>         (5250 - 5330 @ 80), (20), DFS, AUTO-BW
>         (5490 - 5710 @ 160), (27), DFS
>
> +# Source:
> +# https://www.siget.gob.sv/actualizacion-de-cuadro-nacional-de-atribucion-de-frecuencias-t-0408-2023/
>  country SV: DFS-FCC
>         (2402 - 2482 @ 40), (20)
>         (5170 - 5250 @ 20), (17)
>         (5250 - 5330 @ 20), (23), DFS
>         (5735 - 5835 @ 20), (30)
> +       (5925 - 7125 @ 320), (12), NO-OUTDOOR
>
>  country SY:
>         (2402 - 2482 @ 40), (20)
> --
> 2.25.1
>

[PATCH 5/5] wireless-regdb: Update regulatory info for Togo (TG) for 2022

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih@realtek.com>

Republic ToGolaise released Decision N 226/ARCEP/DG/22.

2400-2483.5 MHz
  - EIRP 100 mW and 10 mW/MHz density
5150-5350 MHz
  - EIRP 200 mW
  - If TPC is not used, must be reduced by 3 dB
5470-5850 MHz
  - EIRP 1W
  - If TPC is not used, must be reduced by 3 dB
5925-6425 MHz
  - LPI
    * EIRP 23 dBm (200 mW)
    * EIRP density 10 dBm/MHz
    * Use limited to indoor
  - VLP
    * EIRP 14 dBm (25 mW)
    * EIRP density -1 dBm/MHz
57-66 GHz
  - EIRP 40 dBm and 13 dBm/MHz density

[1] https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 db.txt | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/db.txt b/db.txt
index 2a4f1ed524c1..6192dafe9715 100644
--- a/db.txt
+++ b/db.txt
@@ -1763,11 +1763,15 @@ country TD: DFS-ETSI
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5490 - 5710 @ 160), (27), DFS
 
+# Source:
+# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf
 country TG: DFS-ETSI
-	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 40), (20)
-	(5250 - 5330 @ 40), (20), DFS
-	(5490 - 5710 @ 40), (27), DFS
+	(2400 - 2483.5 @ 40), (100 mW)
+	(5150 - 5250 @ 40), (200 mW)
+	(5250 - 5350 @ 40), (20), DFS
+	(5470 - 5850 @ 40), (27), DFS
+	(5925 - 6425 @ 320), (23), NO-OUTDOOR
+	(57000 - 66000 @2160), (40)
 
 # Source:
 # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf
-- 
2.25.1

Re: [PATCH 5/5] wireless-regdb: Update regulatory info for Togo (TG) for 2022

[Chen-Yu Tsai]

On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote:
>
> From: Ping-Ke Shih <pkshih@realtek.com>
>
> Republic ToGolaise released Decision N 226/ARCEP/DG/22.
>
> 2400-2483.5 MHz
>   - EIRP 100 mW and 10 mW/MHz density
> 5150-5350 MHz
>   - EIRP 200 mW
>   - If TPC is not used, must be reduced by 3 dB
> 5470-5850 MHz
>   - EIRP 1W
>   - If TPC is not used, must be reduced by 3 dB
> 5925-6425 MHz
>   - LPI
>     * EIRP 23 dBm (200 mW)
>     * EIRP density 10 dBm/MHz

The document you linked to suggests it is actually -10 dBm/MHz,
which kind of makes it useless as the total e.i.r.p for a 20 MHz
channel would be 2 mW or 3 dBm...

And the PSD for LP being lower than VLP seems like an error.

>     * Use limited to indoor
>   - VLP
>     * EIRP 14 dBm (25 mW)
>     * EIRP density -1 dBm/MHz
> 57-66 GHz
>   - EIRP 40 dBm and 13 dBm/MHz density
>
> [1] https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf
>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
> ---
>  db.txt | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/db.txt b/db.txt
> index 2a4f1ed524c1..6192dafe9715 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -1763,11 +1763,15 @@ country TD: DFS-ETSI
>         (5250 - 5330 @ 80), (20), DFS, AUTO-BW
>         (5490 - 5710 @ 160), (27), DFS
>
> +# Source:
> +# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf
>  country TG: DFS-ETSI
> -       (2402 - 2482 @ 40), (20)
> -       (5170 - 5250 @ 40), (20)
> -       (5250 - 5330 @ 40), (20), DFS
> -       (5490 - 5710 @ 40), (27), DFS
> +       (2400 - 2483.5 @ 40), (100 mW)
> +       (5150 - 5250 @ 40), (200 mW)
> +       (5250 - 5350 @ 40), (20), DFS

The regulation doesn't say this can be split. It's one rule for 5150 - 5350.

> +       (5470 - 5850 @ 40), (27), DFS

Why only 40 MHz channels?

> +       (5925 - 6425 @ 320), (23), NO-OUTDOOR
> +       (57000 - 66000 @2160), (40)

Regulation requires DFS on all bands.


ChenYu


>  # Source:
>  # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf
> --
> 2.25.1
>

Re: [PATCH 5/5] wireless-regdb: Update regulatory info for Togo (TG) for 2022

[Ping-Ke Shih]

Chen-Yu Tsai <wens@kernel.org> wrote:
>
> On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote:
> >
> > 5925-6425 MHz
> >   - LPI
> >     * EIRP 23 dBm (200 mW)
> >     * EIRP density 10 dBm/MHz
>
> The document you linked to suggests it is actually -10 dBm/MHz,
> which kind of makes it useless as the total e.i.r.p for a 20 MHz
> channel would be 2 mW or 3 dBm...
>
> And the PSD for LP being lower than VLP seems like an error.

Since it looks like an error, I keep the power limit as I made, but
add some description by v2.

Thanks for the review.
Ping-Ke

Re: [PATCH 1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022

[Chen-Yu Tsai]

On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote:
>
> From: Ping-Ke Shih <pkshih@realtek.com>
>
> Radiocommunications Regulations (General User Radio Licence for Short Range
> Devices) Notice 2022 listed spectrum:
>
> 2400.0000 - 2483.5000
>   * e.i.r.p. 0 dBW (1 W)

13. Transmitters using e.i.r.p. greater than 0 dBW (1 W) must employ
    frequency hopping or digital modulation techniques.

AFAIK WiFi uses digital modulation techniques. So this could be
raised up to 6 dBW?

> 5150.0000 - 5350.0000
>  * the maximum power is 0 dBW (1 W) e.i.r.p. and
>    the maximum permitted power spectral density is -13 dBW/MHz
>    (17 dBm/Hz, 50 mW/MHz) e.i.r.p.
>  * 5250 - 5350 MHz, If Transmitter Power Control is not used, then the
>    maximum power (e.i.r.p.) value shall be reduced by 3 dB.
>
> 5470.0000 - 5725.0000
>  * 5470 - 5725 MHz, transmitter peak power must not exceed -6 dBW (250 mW)
>    If Transmitter Power Control is not used, then the maximum power
>    (e.i.r.p.) value must be reduced by 3 dB.

We use e.i.r.p. value in the database. The limit is 1W, then minus 3 dB
due to lack of TPC.

> 5725.0000 - 5850.0000
>  * 5725 - 5850 MHz, the transmitter peak power must not exceed 0 dBW (1 W)
>    and the power spectral density must not exceed 17 dBm/MHz.

13. Transmitters using e.i.r.p. greater than 0 dBW (1 W) must employ
    frequency hopping or digital modulation techniques.

AFAIK WiFi uses digital modulation techniques. So this could be
raised up to 6 dBW?


Thanks
ChenYu

> 5925.0000 - 6425.0000
>  * the maximum power is -6 dBW (24 dBm, 250 mW ) e.i.r.p. and
>    the maximum permitted power spectral density is -19 dBW/MHz
>    (11 dBm/MHz, 12.6 mW/MHz) e.i.r.p. for low power devices.
>    Only be used indoors.
>  * the maximum power is -16 dBW (14 dBm, 25 mW ) e.i.r.p. and
>    the maximum permitted power spectral density is -29 dBW/MHz
>    (1 dBm/MHz, 1.26 mW/MHz) e.i.r.p. for very low power devices.
>    Very Low Power applications.
>
> 57000.0000 - 71000.0000
>  * for devices transmitting at 10 dBW e.i.r.p or less,
>    the power spectral density must not exceed -7 dBW/MHz e.i.r.p. and
>    the maximum transmit power must not exceed -3 dBW at the antenna port
>    or ports.
>  * for devices transmitting greater than 10 dBW e.i.r.p., the power
>    spectral density shall not exceed 8 dBW/MHz e.i.r.p and antennas with
>    a gain greater than 30 dBi shall be used.
>
> [1] https://gazette.govt.nz/notice/id/2022-go3100
>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
> ---
>  db.txt | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/db.txt b/db.txt
> index d7592c299c62..266ba2d48731 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -1416,12 +1416,16 @@ country NP: DFS-JP
>         (5250 - 5330 @ 80), (20), DFS, AUTO-BW
>         (5735 - 5835 @ 80), (20)
>
> +# Source:
> +# https://gazette.govt.nz/notice/id/2022-go3100
>  country NZ: DFS-ETSI
> -       (2402 - 2482 @ 40), (30)
> -       (5170 - 5250 @ 80), (17), AUTO-BW
> -       (5250 - 5330 @ 80), (24), DFS, AUTO-BW
> -       (5490 - 5730 @ 160), (24), DFS
> -       (5735 - 5835 @ 80), (30)
> +       (2400 - 2483.5 @ 40), (30)
> +       (5150 - 5250 @ 80), (30), AUTO-BW
> +       (5250 - 5350 @ 80), (27), DFS, AUTO-BW
> +       (5470 - 5730 @ 160), (21), DFS
> +       (5725 - 5850 @ 80), (30)
> +       (5925 - 6425 @ 320), (24), NO-OUTDOOR
> +       (57000 - 71000 @ 2160), (40)
>
>  country OM: DFS-ETSI
>         (2402 - 2482 @ 40), (20)
> --
> 2.25.1
>