From: Kalle Valo <kvalo@kernel.org>
To: ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH RFC 3/4] wifi: ath12k: ath12k_mac_op_set_key(): remove exit label
Date: Wed, 21 Aug 2024 18:37:27 +0300 [thread overview]
Message-ID: <20240821153728.2121600-4-kvalo@kernel.org> (raw)
In-Reply-To: <20240821153728.2121600-1-kvalo@kernel.org>
From: Kalle Valo <quic_kvalo@quicinc.com>
In ath12k_mac_op_set_key() removing the exit label was a bit more complex as
checkpatch complained about the unnecessary else branch after a return. So
remove the else branch and remove now the unncessary ret initialisation.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
drivers/net/wireless/ath/ath12k/mac.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index a9d37a59a8c2..80db9004cdd7 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -3942,7 +3942,7 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
struct ath12k_peer *peer;
struct ath12k_sta *arsta;
const u8 *peer_addr;
- int ret = 0;
+ int ret;
u32 flags = 0;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
@@ -3970,14 +3970,13 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
if (cmd == SET_KEY) {
ath12k_warn(ab, "cannot install key for non-existent peer %pM\n",
peer_addr);
- ret = -EOPNOTSUPP;
- goto exit;
- } else {
- /* if the peer doesn't exist there is no key to disable
- * anymore
- */
- goto exit;
+ return -EOPNOTSUPP;
}
+
+ /* if the peer doesn't exist there is no key to disable
+ * anymore
+ */
+ return 0;
}
if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
@@ -3988,13 +3987,13 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
ret = ath12k_install_key(arvif, key, cmd, peer_addr, flags);
if (ret) {
ath12k_warn(ab, "ath12k_install_key failed (%d)\n", ret);
- goto exit;
+ return ret;
}
ret = ath12k_dp_rx_peer_pn_replay_config(arvif, peer_addr, cmd, key);
if (ret) {
ath12k_warn(ab, "failed to offload PN replay detection %d\n", ret);
- goto exit;
+ return ret;
}
spin_lock_bh(&ab->base_lock);
@@ -4040,8 +4039,7 @@ static int ath12k_mac_set_key(struct ath12k *ar, enum set_key_cmd cmd,
spin_unlock_bh(&ab->base_lock);
-exit:
- return ret;
+ return 0;
}
static int ath12k_mac_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
--
2.39.2
next prev parent reply other threads:[~2024-08-21 15:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 15:37 [PATCH RFC 0/4] wifi: ath12k: switch to using wiphy_lock() Kalle Valo
2024-08-21 15:37 ` [PATCH RFC 1/4] wifi: ath12k: switch to using wiphy_lock() and remove ar->conf_mutex Kalle Valo
2024-08-22 5:46 ` Baochen Qiang
2024-09-05 16:52 ` Kalle Valo
2024-08-21 15:37 ` [PATCH RFC 2/4] wifi: ath12k: cleanup unneeded labels Kalle Valo
2024-08-21 16:55 ` Jeff Johnson
2024-09-05 16:49 ` Kalle Valo
2024-08-21 17:20 ` Johannes Berg
2024-09-05 17:09 ` Kalle Valo
2024-08-21 15:37 ` Kalle Valo [this message]
2024-08-21 15:37 ` [PATCH RFC 4/4] wifi: ath12k: convert struct ath12k_sta::update_wk to use struct wiphy_work Kalle Valo
2024-08-22 6:19 ` Baochen Qiang
2024-09-05 16:58 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240821153728.2121600-4-kvalo@kernel.org \
--to=kvalo@kernel.org \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).