From: Stefan Lippers-Hollmann <s.l-h@gmx.de>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: "rtl8821cerfe2@gmail.com" <rtl8821cerfe2@gmail.com>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"chewitt@libreelec.tv" <chewitt@libreelec.tv>
Subject: Re: [PATCH 1/3] wifi: rtlwifi: Move code from rtl8192de to rtl8192d-common
Date: Mon, 16 Sep 2024 12:21:08 +0200 [thread overview]
Message-ID: <20240916122108.165d5741@mir> (raw)
In-Reply-To: <f0900afbfbd54f5a9fae875e1cb53470@realtek.com>
[-- Attachment #1: Type: text/plain, Size: 20132 bytes --]
Hi
On 2024-09-16, Ping-Ke Shih wrote:
> Stefan Lippers-Hollmann <s.l-h@gmx.de> wrote:
> > On 2024-03-13, Ping-Ke Shih wrote:
> > > On Wed, 2024-03-13 at 06:49 +0100, Stefan Lippers-Hollmann wrote:
> > > > On 2024-03-13, Bitterblue Smith wrote:
> > > > > Create the new module rtl8192d-common and move some code into it from
> > > > > rtl8192de. Now the rtl8192de driver (PCI) and the new rtl8192du driver
> > > > > (USB) can share some of the code.
> > [...]
> > > > Using the firmware from https://github.com/lwfinger/rtl8192du/,
> > > > it would be great if someone could publish the necessary firmware
> > > > to linux-firmware.
> > > >
> > > > MD5:
> > > > abccba1e9bb456eb81dfc88502a56300 /lib/firmware/rtlwifi/rtl8192dufw.bin
>
> I found its version is 38 that is little bit older than [1] (version 39).
> Bitterblue has made a binary from [1] and I have verified the binary.
> I will send this firmware days later because my previous firmware is
> still under review.
[...]
> [1] https://github.com/lwfinger/rtl8192du/blob/master/hal/Hal8192DUHWImg.c
Great, just a quick functionality check with this firmware (v39):
MD5:
18eb8791673dcc38b268ad19c92ba6a2 */lib/firmware/rtlwifi/rtl8192dufw.bin
SHA256:
710c4a28904b180e5a316a372e1038972102b2545909bc117c2455cf536e4490 */lib/firmware/rtlwifi/rtl8192dufw.bin
Connects and works fine with kernel v6.11, using WPA3SAE over 5 GHz.
[ 202.941904] usb 3-5: new high-speed USB device number 5 using xhci_hcd
[ 203.070437] usb 3-5: New USB device found, idVendor=0bda, idProduct=8194, bcdDevice= 0.00
[ 203.070453] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 203.070460] usb 3-5: Product: 802.11n NIC
[ 203.070464] usb 3-5: Manufacturer: Realtek
[ 203.070468] usb 3-5: SerialNumber: 00e04c000001
[ 203.220236] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 203.220248] rtl8192du: Driver for Realtek RTL8192DU WLAN interface
[ 203.220249] rtl8192du: Loading firmware file rtlwifi/rtl8192dufw.bin
[ 203.220324] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 203.220648] usbcore: registered new interface driver rtl8192du
[ 203.227708] rtl8192du 3-5:1.0 wlxXXXlocalMACXXX: renamed from wlan0
[ 230.852662] wlxXXXlocalMACXXX: authenticate with XXXAP1MACXXX (local address=XXXlocalMACXXX)
[ 230.852670] wlxXXXlocalMACXXX: send auth to XXXAP1MACXXX (try 1/3)
[ 230.870370] wlxXXXlocalMACXXX: authenticate with XXXAP1MACXXX (local address=XXXlocalMACXXX)
[ 230.870381] wlxXXXlocalMACXXX: send auth to XXXAP1MACXXX (try 1/3)
[ 230.873195] wlxXXXlocalMACXXX: authenticated
[ 230.874472] wlxXXXlocalMACXXX: associate with XXXAP1MACXXX (try 1/3)
[ 230.885511] wlxXXXlocalMACXXX: RX AssocResp from XXXAP1MACXXX (capab=0x1511 status=0 aid=2)
[ 230.887245] wlxXXXlocalMACXXX: associated
[ 230.897180] wlxXXXlocalMACXXX: Limiting TX power to 23 (23 - 0) dBm as advertised by XXXAP1MACXXX
[ 240.889472] wlxXXXlocalMACXXX: deauthenticating from XXXAP1MACXXX by local choice (Reason: 3=DEAUTH_LEAVING)
[ 244.386457] wlxXXXlocalMACXXX: authenticate with XXXAP2MACXXX (local address=XXXlocalMACXXX)
[ 244.386470] wlxXXXlocalMACXXX: send auth to XXXAP2MACXXX (try 1/3)
[ 244.397502] wlxXXXlocalMACXXX: authenticate with XXXAP2MACXXX (local address=XXXlocalMACXXX)
[ 244.397515] wlxXXXlocalMACXXX: send auth to XXXAP2MACXXX (try 1/3)
[ 244.399226] wlxXXXlocalMACXXX: authenticated
[ 244.400306] wlxXXXlocalMACXXX: associate with XXXAP2MACXXX (try 1/3)
[ 244.407420] wlxXXXlocalMACXXX: RX AssocResp from XXXAP2MACXXX (capab=0x1511 status=0 aid=3)
[ 244.408977] wlxXXXlocalMACXXX: associated
[ 244.461286] wlxXXXlocalMACXXX: Limiting TX power to 23 (23 - 0) dBm as advertised by XXXAP2MACXXX
(there is AP-side active bandsteering/ roaming at play)
# wpa_cli -i wlxXXXlocalMACXXX status
bssid=XXXAP2MACXXX
freq=5260
ssid=XXX
id=4
id_str=XXX
mode=station
wifi_generation=4
pairwise_cipher=CCMP
group_cipher=CCMP
key_mgmt=SAE
pmf=2
mgmt_group_cipher=BIP
sae_group=19
sae_h2e=0
sae_pk=0
wpa_state=COMPLETED
p2p_device_address=XXXlocalMACXXX
address=XXXlocalMACXXX
uuid=XXXUUIDXXX
$ iperf3 -c XXXremoteIPv6XXX
Connecting to host XXXremoteIPv6XXX, port 5201
[ 5] local XXXlocalXXX port 45116 connected to XXXremoteIPv6XXX port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 13.9 MBytes 116 Mbits/sec 0 441 KBytes
[ 5] 1.00-2.00 sec 12.1 MBytes 102 Mbits/sec 0 471 KBytes
[ 5] 2.00-3.00 sec 11.4 MBytes 95.4 Mbits/sec 0 471 KBytes
[ 5] 3.00-4.00 sec 12.5 MBytes 105 Mbits/sec 0 604 KBytes
[ 5] 4.00-5.00 sec 11.1 MBytes 93.3 Mbits/sec 0 604 KBytes
[ 5] 5.00-6.00 sec 11.4 MBytes 95.4 Mbits/sec 0 604 KBytes
[ 5] 6.00-7.00 sec 11.9 MBytes 99.6 Mbits/sec 0 637 KBytes
[ 5] 7.00-8.00 sec 10.8 MBytes 90.2 Mbits/sec 0 637 KBytes
[ 5] 8.00-9.00 sec 11.8 MBytes 98.6 Mbits/sec 0 637 KBytes
[ 5] 9.00-10.00 sec 12.0 MBytes 101 Mbits/sec 0 722 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 119 MBytes 99.6 Mbits/sec 0 sender
[ 5] 0.00-10.02 sec 116 MBytes 97.2 Mbits/sec receiver
iperf Done.
$ iperf3 -c XXXremoteIPv6XXX --reverse
Connecting to host XXXremoteIPv6XXX, port 5201
Reverse mode, remote host XXXremoteIPv6XXX is sending
[ 5] local XXXlocalXXX port 58256 connected to XXXremoteIPv6XXX port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 1.00-2.00 sec 13.6 MBytes 114 Mbits/sec
[ 5] 2.00-3.00 sec 14.1 MBytes 118 Mbits/sec
[ 5] 3.00-4.00 sec 14.0 MBytes 117 Mbits/sec
[ 5] 4.00-5.00 sec 12.2 MBytes 103 Mbits/sec
[ 5] 5.00-6.00 sec 14.2 MBytes 120 Mbits/sec
[ 5] 6.00-7.00 sec 12.5 MBytes 105 Mbits/sec
[ 5] 7.00-8.00 sec 12.5 MBytes 105 Mbits/sec
[ 5] 8.00-9.00 sec 13.9 MBytes 116 Mbits/sec
[ 5] 9.00-10.00 sec 14.1 MBytes 118 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 138 MBytes 116 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 134 MBytes 112 Mbits/sec receiver
iperf Done.
$ iperf3 -c XXXremoteIPv6XXX --bidir
Connecting to host XXXremoteIPv6XXX, port 5201
[ 5] local XXXlocalXXX port 50634 connected to XXXremoteIPv6XXX port 5201
[ 7] local XXXlocalXXX port 50646 connected to XXXremoteIPv6XXX port 5201
[ ID][Role] Interval Transfer Bitrate Retr Cwnd
[ 5][TX-C] 0.00-1.00 sec 6.25 MBytes 52.4 Mbits/sec 0 300 KBytes
[ 7][RX-C] 0.00-1.00 sec 7.00 MBytes 58.7 Mbits/sec
[ 5][TX-C] 1.00-2.00 sec 3.88 MBytes 32.5 Mbits/sec 0 414 KBytes
[ 7][RX-C] 1.00-2.00 sec 10.1 MBytes 84.9 Mbits/sec
[ 5][TX-C] 2.00-3.00 sec 1.88 MBytes 15.7 Mbits/sec 0 464 KBytes
[ 7][RX-C] 2.00-3.00 sec 12.4 MBytes 104 Mbits/sec
[ 5][TX-C] 3.00-4.00 sec 1.88 MBytes 15.7 Mbits/sec 0 487 KBytes
[ 7][RX-C] 3.00-4.00 sec 12.2 MBytes 103 Mbits/sec
[ 5][TX-C] 4.00-5.00 sec 2.38 MBytes 19.9 Mbits/sec 0 582 KBytes
[ 7][RX-C] 4.00-5.00 sec 10.9 MBytes 91.2 Mbits/sec
[ 5][TX-C] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec 0 602 KBytes
[ 7][RX-C] 5.00-6.00 sec 10.2 MBytes 86.0 Mbits/sec
[ 5][TX-C] 6.00-7.00 sec 1.50 MBytes 12.6 Mbits/sec 0 661 KBytes
[ 7][RX-C] 6.00-7.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5][TX-C] 7.00-8.00 sec 1.38 MBytes 11.5 Mbits/sec 0 728 KBytes
[ 7][RX-C] 7.00-8.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5][TX-C] 8.00-9.00 sec 1.38 MBytes 11.5 Mbits/sec 0 777 KBytes
[ 7][RX-C] 8.00-9.00 sec 10.4 MBytes 87.0 Mbits/sec
[ 5][TX-C] 9.00-10.00 sec 1.38 MBytes 11.5 Mbits/sec 2 593 KBytes
[ 7][RX-C] 9.00-10.00 sec 11.1 MBytes 93.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.00 sec 21.9 MBytes 18.3 Mbits/sec 2 sender
[ 5][TX-C] 0.00-10.02 sec 19.5 MBytes 16.3 Mbits/sec receiver
[ 7][RX-C] 0.00-10.00 sec 110 MBytes 92.7 Mbits/sec 0 sender
[ 7][RX-C] 0.00-10.02 sec 106 MBytes 89.2 Mbits/sec receiver
iperf Done.
# iw dev wlxXXXlocalMACXXX station dump
Station XXXAP2MACXXX (on wlxXXXlocalMACXXX)
inactive time: 1 ms
rx bytes: 819594565
rx packets: 556734
tx bytes: 379056249
tx packets: 427613
tx retries: 0
tx failed: 0
beacon loss: 0
rx drop misc: 0
signal: 10 dBm
signal avg: -66 dBm
tx bitrate: 300.0 MBit/s MCS 15 40MHz short GI
tx duration: 0 us
rx bitrate: 243.0 MBit/s MCS 14 40MHz
rx duration: 0 us
authorized: yes
authenticated: yes
associated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
DTIM period: 3
beacon interval:100
short slot time:yes
connected time: 556 seconds
associated at [boottime]: 244.363s
associated at: 1726480574210 ms
current time: 1726481129874 ms
# iw phy phy1 info
Wiphy phy1
wiphy index: 1
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
RTS threshold: 2347
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CCMP-256 (00-0f-ac:10)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
* CMAC (00-0f-ac:6)
* CMAC-256 (00-0f-ac:13)
* GMAC-128 (00-0f-ac:11)
* GMAC-256 (00-0f-ac:12)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
* P2P-client
* P2P-GO
Band 1:
Capabilities: 0x186e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412.0 MHz [1] (20.0 dBm)
* 2417.0 MHz [2] (20.0 dBm)
* 2422.0 MHz [3] (20.0 dBm)
* 2427.0 MHz [4] (20.0 dBm)
* 2432.0 MHz [5] (20.0 dBm)
* 2437.0 MHz [6] (20.0 dBm)
* 2442.0 MHz [7] (20.0 dBm)
* 2447.0 MHz [8] (20.0 dBm)
* 2452.0 MHz [9] (20.0 dBm)
* 2457.0 MHz [10] (20.0 dBm)
* 2462.0 MHz [11] (20.0 dBm)
* 2467.0 MHz [12] (20.0 dBm)
* 2472.0 MHz [13] (20.0 dBm)
* 2484.0 MHz [14] (disabled)
Band 2:
Capabilities: 0x186e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180.0 MHz [36] (23.0 dBm)
* 5200.0 MHz [40] (23.0 dBm)
* 5220.0 MHz [44] (23.0 dBm)
* 5240.0 MHz [48] (23.0 dBm)
* 5260.0 MHz [52] (20.0 dBm) (no IR, radar detection)
* 5280.0 MHz [56] (20.0 dBm) (no IR, radar detection)
* 5300.0 MHz [60] (20.0 dBm) (no IR, radar detection)
* 5320.0 MHz [64] (20.0 dBm) (no IR, radar detection)
* 5500.0 MHz [100] (26.0 dBm) (no IR, radar detection)
* 5520.0 MHz [104] (26.0 dBm) (no IR, radar detection)
* 5540.0 MHz [108] (26.0 dBm) (no IR, radar detection)
* 5560.0 MHz [112] (26.0 dBm) (no IR, radar detection)
* 5580.0 MHz [116] (26.0 dBm) (no IR, radar detection)
* 5600.0 MHz [120] (26.0 dBm) (no IR, radar detection)
* 5620.0 MHz [124] (26.0 dBm) (no IR, radar detection)
* 5640.0 MHz [128] (26.0 dBm) (no IR, radar detection)
* 5660.0 MHz [132] (26.0 dBm) (no IR, radar detection)
* 5680.0 MHz [136] (26.0 dBm) (no IR, radar detection)
* 5700.0 MHz [140] (26.0 dBm) (no IR, radar detection)
* 5745.0 MHz [149] (13.0 dBm)
* 5765.0 MHz [153] (13.0 dBm)
* 5785.0 MHz [157] (13.0 dBm)
* 5805.0 MHz [161] (13.0 dBm)
* 5825.0 MHz [165] (13.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* testmode
* connect
* disconnect
* set_qos_map
* set_multicast_to_unicast
software interface modes (can always be added):
* AP/VLAN
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports configuring vdev MAC-addr on create.
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xb0 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
Supported extended features:
* [ RRM ]: RRM
* [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
* [ SCAN_RANDOM_SN ]: use random sequence numbers in scans
* [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans
* [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
* [ DEL_IBSS_STA ]: deletion of IBSS station support
* [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
* [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
* [ POWERED_ADDR_CHANGE ]: can change MAC address while up
Regards
Stefan Lippers-Hollmann
[-- Attachment #2: Digitale Signatur von OpenPGP --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-09-16 10:21 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-12 22:18 [PATCH 1/3] wifi: rtlwifi: Move code from rtl8192de to rtl8192d-common Bitterblue Smith
2024-03-12 22:20 ` [PATCH 2/3] wifi: rtlwifi: Adjust rtl8192d-common for USB Bitterblue Smith
2024-03-13 3:46 ` Ping-Ke Shih
2024-03-13 22:47 ` Bitterblue Smith
2024-03-14 1:20 ` Ping-Ke Shih
2024-03-14 13:49 ` Bitterblue Smith
2024-03-12 22:23 ` [PATCH 3/3] wifi: rtlwifi: Add new rtl8192du driver Bitterblue Smith
2024-03-13 5:49 ` Ping-Ke Shih
2024-03-13 22:45 ` Bitterblue Smith
2024-03-14 0:34 ` Ping-Ke Shih
2024-03-12 23:21 ` [PATCH 1/3] wifi: rtlwifi: Move code from rtl8192de to rtl8192d-common Bitterblue Smith
2024-03-13 3:53 ` Ping-Ke Shih
2024-03-13 22:40 ` Bitterblue Smith
2024-03-13 2:16 ` Ping-Ke Shih
2024-03-13 22:39 ` Bitterblue Smith
2024-03-13 5:49 ` Stefan Lippers-Hollmann
2024-03-13 5:55 ` Ping-Ke Shih
2024-03-13 6:18 ` Stefan Lippers-Hollmann
2024-03-13 6:25 ` Ping-Ke Shih
2024-03-13 22:44 ` Bitterblue Smith
2024-03-13 22:41 ` Bitterblue Smith
2024-03-14 0:28 ` Ping-Ke Shih
2024-09-15 6:04 ` Stefan Lippers-Hollmann
2024-09-16 7:42 ` Ping-Ke Shih
2024-09-16 10:21 ` Stefan Lippers-Hollmann [this message]
2024-03-13 8:58 ` Kalle Valo
2024-03-13 22:46 ` Bitterblue Smith
2024-03-14 8:18 ` Kalle Valo
2024-03-14 8:42 ` Kalle Valo
2024-03-14 13:50 ` Bitterblue Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240916122108.165d5741@mir \
--to=s.l-h@gmx.de \
--cc=chewitt@libreelec.tv \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=rtl8821cerfe2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox