[PATCH wireless v1] Revert "wifi: mwifiex: Fix HT40 bandwidth issue."

[Francesco Dolcini <francesco@dolcini.it>]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

This reverts commit 34253084291cb210b251d64657958b8041ce4ab1.

That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.

Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 34253084291c ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 738bafc3749b..66f0f5377ac1 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -403,14 +403,12 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
 
 		if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
 		    bss_desc->bcn_ht_oper->ht_param &
-		    IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {
-			chan_list->chan_scan_param[0].radio_type |=
-				CHAN_BW_40MHZ << 2;
+		    IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)
 			SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
 					  radio_type,
 					  (bss_desc->bcn_ht_oper->ht_param &
 					  IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
-		}
+
 		*buffer += struct_size(chan_list, chan_scan_param, 1);
 		ret_len += struct_size(chan_list, chan_scan_param, 1);
 	}
-- 
2.39.5