Linux wireless drivers development
 help / color / mirror / Atom feed
From: "Yu Zhang(Yuriy)" <yu.zhang@oss.qualcomm.com>
To: jjohnson@kernel.org
Cc: baochen.qiang@oss.qualcomm.com, linux-kernel@vger.kernel.org,
	linux-wireless@vger.kernel.org, ath11k@lists.infradead.org
Subject: [PATCH ath-next v2 0/6] wifi: ath11k: Add single shot/periodic CFR capture support
Date: Tue,  4 Nov 2025 08:26:27 -0800	[thread overview]
Message-ID: <20251104162633.3007874-1-yu.zhang@oss.qualcomm.com> (raw)

To enable/disable cfr feature use command,

echo <val> > /sys/kernel/debug/ieee80211/phyX/ath11k/enable_cfr

where, val: 0 to disable CFR and 1 to enable CFR.

To enable CFR capture for associated peers,

echo "<val> <bw> <periodicity> <method>"
 >
/sys/kernel/debug/ieee80211/phyX/netdev\:wlanx/stations/<mac>/cfr_capture

val: 0 - stop CFR capture
     1 - start CFR capture
bw: CFR capture bandwidth
     0 - 20MHZ
     1 - 40MHZ
     2 - 80MHZ
Periodicity: Periodicity at which hardware is expceted to collect CFR
dump.
     0 - single shot capture.
     non zero - for Periodic captures (value should be multiple of 10
ms)
method: Method used by hardware to collect the CFR dump.
     0 - from the ACKs of QOS NULL packets.

To enable CFR capture for unassociated clients,

echo “<mac address> <val> <periodicity>”
 > /sys/kernel/debug/ieee80211/phyX/ath11k/cfr_unassoc

Mac address: mac address of the client.
Val: 0 - start CFR capture
     1 – stop CFR capture
Periodicity: Periodicity at which hardware is expceted to collect CFR
dump.
     0 - single shot capture.
     non zero - for Periodic captures (value should be multiple of 10
ms)

To collect the cfr dump,
cat /sys/kernel/debug/ieee80211/phy0/ath11k/cfr_capture0 > /tmp/cfr.bin

Previous link:
https://lore.kernel.org/all/1645005922-7252-1-git-send-email-quic_vnaralas@quicinc.com/

Signed-off-by: Yu Zhang(Yuriy) <yu.zhang@oss.qualcomm.com>

---
Changes in v2:
 - Update related comments. 
---

Venkateswara Naralasetty (6):
  wifi: ath11k: Add initialization and deinitialization sequence for CFR
    module
  wifi: ath11k: Register debugfs for CFR configuration
  wifi: ath11k: Add support unassociated client CFR
  wifi: ath11k: Register relayfs entries for CFR dump
  wifi: ath11k: Register DBR event handler for CFR data
  wifi: ath11k: Register handler for CFR capture event

 drivers/net/wireless/ath/ath11k/Kconfig       |  11 +
 drivers/net/wireless/ath/ath11k/Makefile      |   1 +
 drivers/net/wireless/ath/ath11k/cfr.c         | 994 ++++++++++++++++++
 drivers/net/wireless/ath/ath11k/cfr.h         | 301 ++++++
 drivers/net/wireless/ath/ath11k/core.c        |  41 +-
 drivers/net/wireless/ath/ath11k/core.h        |  19 +-
 drivers/net/wireless/ath/ath11k/dbring.c      |  50 +-
 drivers/net/wireless/ath/ath11k/dbring.h      |   8 +-
 drivers/net/wireless/ath/ath11k/debug.h       |   8 +-
 drivers/net/wireless/ath/ath11k/debugfs_sta.c | 143 ++-
 drivers/net/wireless/ath/ath11k/hal.c         |   3 +-
 drivers/net/wireless/ath/ath11k/hw.h          |   5 +-
 drivers/net/wireless/ath/ath11k/mac.c         |  17 +-
 drivers/net/wireless/ath/ath11k/wmi.c         | 147 ++-
 drivers/net/wireless/ath/ath11k/wmi.h         |  97 +-
 15 files changed, 1819 insertions(+), 26 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath11k/cfr.c
 create mode 100644 drivers/net/wireless/ath/ath11k/cfr.h


base-commit: 059ca8fd692b67a77fb89e9d4e8f57cf08e32b08
-- 
2.34.1


             reply	other threads:[~2025-11-04 16:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-04 16:26 Yu Zhang(Yuriy) [this message]
2025-11-04 16:26 ` [PATCH ath-next v2 1/6] wifi: ath11k: Add initialization and deinitialization sequence for CFR module Yu Zhang(Yuriy)
2025-11-05  2:40   ` Baochen Qiang
2025-11-04 16:26 ` [PATCH ath-next v2 2/6] wifi: ath11k: Register debugfs for CFR configuration Yu Zhang(Yuriy)
2025-11-04 16:26 ` [PATCH ath-next v2 3/6] wifi: ath11k: Add support unassociated client CFR Yu Zhang(Yuriy)
2025-11-04 16:26 ` [PATCH ath-next v2 4/6] wifi: ath11k: Register relayfs entries for CFR dump Yu Zhang(Yuriy)
2025-11-04 16:26 ` [PATCH ath-next v2 5/6] wifi: ath11k: Register DBR event handler for CFR data Yu Zhang(Yuriy)
2025-11-05  2:46   ` Baochen Qiang
2025-11-04 16:26 ` [PATCH ath-next v2 6/6] wifi: ath11k: Register handler for CFR capture event Yu Zhang(Yuriy)
2025-11-05  2:49   ` Baochen Qiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251104162633.3007874-1-yu.zhang@oss.qualcomm.com \
    --to=yu.zhang@oss.qualcomm.com \
    --cc=ath11k@lists.infradead.org \
    --cc=baochen.qiang@oss.qualcomm.com \
    --cc=jjohnson@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox