[PATCH rtw-next 7/9] wifi: rtw89: mac: clear DTOP disable excluding CID7090 variant for RTL8922D

[Ping-Ke Shih <pkshih@realtek.com>]

The data TX FIFO operation (DTOP) is a hardware component in TMAC circuit
to control TX flow, since CID7090 variant can clear DTOP by default, no
need it by driver.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/mac_be.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw89/mac_be.c b/drivers/net/wireless/realtek/rtw89/mac_be.c
index 142e892f85c4..e552711ffce4 100644
--- a/drivers/net/wireless/realtek/rtw89/mac_be.c
+++ b/drivers/net/wireless/realtek/rtw89/mac_be.c
@@ -1352,6 +1352,7 @@ static int spatial_reuse_init_be(struct rtw89_dev *rtwdev, u8 mac_idx)
 static int tmac_init_be(struct rtw89_dev *rtwdev, u8 mac_idx)
 {
 	const struct rtw89_chip_info *chip = rtwdev->chip;
+	struct rtw89_hal *hal = &rtwdev->hal;
 	u32 reg;
 
 	reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_TB_PPDU_CTRL, mac_idx);
@@ -1363,7 +1364,7 @@ static int tmac_init_be(struct rtw89_dev *rtwdev, u8 mac_idx)
 		rtw89_write32_mask(rtwdev, reg, B_BE_EHT_HE_PPDU_2XLTF_ZLD_USTIMER_MASK, 0xe);
 	}
 
-	if (chip->chip_id == RTL8922D) {
+	if (chip->chip_id == RTL8922D && hal->cid != RTL8922D_CID7090) {
 		reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_COMMON_PHYINTF_CTRL_0, mac_idx);
 		rtw89_write32_clr(rtwdev, reg, CLEAR_DTOP_DIS);
 	}
-- 
2.25.1