[PATCH v3 6/8] arm64: dts: qcom: sda660-ifc6560: describe WiFi/BT properly

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

The onboard WiFi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 .../arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 66 +++++++++++++++++++---
 1 file changed, 58 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 74cb29cb7f1a..9e14f53b552e 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -108,6 +108,43 @@ vreg_l10a_1p8: vreg-l10a-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcn3990-pmu {
+		compatible = "qcom,wcn3990-pmu";
+
+		pinctrl-0 = <&sw_ctrl_default>;
+		pinctrl-names = "default";
+
+		vddio-supply = <&vreg_l13a_1p8>;
+		vddxo-supply = <&vreg_l9a_1p8>;
+		vddrf-supply = <&vreg_l6a_1p3>;
+		vddch0-supply = <&vreg_l19a_3p3>;
+		vddch1-supply = <&vreg_l8b_3p3>;
+
+		swctrl-gpios = <&pm660_gpios 5 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_io: ldo0 {
+				regulator-name = "vreg_pmu_io";
+			};
+
+			vreg_pmu_xo: ldo1 {
+				regulator-name = "vreg_pmu_xo";
+			};
+
+			vreg_pmu_rf: ldo2 {
+				regulator-name = "vreg_pmu_rf";
+			};
+
+			vreg_pmu_ch0: ldo3 {
+				regulator-name = "vreg_pmu_ch0";
+			};
+
+			vreg_pmu_ch1: ldo4 {
+				regulator-name = "vreg_pmu_ch1";
+			};
+		};
+	};
 };
 
 &adreno_gpu {
@@ -197,10 +234,10 @@ &blsp2_uart1 {
 	bluetooth {
 		compatible = "qcom,wcn3990-bt";
 
-		vddio-supply = <&vreg_l13a_1p8>;
-		vddxo-supply = <&vreg_l9a_1p8>;
-		vddrf-supply = <&vreg_l6a_1p3>;
-		vddch0-supply = <&vreg_l19a_3p3>;
+		vddio-supply = <&vreg_pmu_io>;
+		vddxo-supply = <&vreg_pmu_xo>;
+		vddrf-supply = <&vreg_pmu_rf>;
+		vddch0-supply = <&vreg_pmu_ch0>;
 		max-speed = <3200000>;
 	};
 };
@@ -238,6 +275,16 @@ &pon_resin {
 	linux,code = <KEY_VOLUMEUP>;
 };
 
+&pm660_gpios {
+	sw_ctrl_default: sw-ctrl-default-state {
+		pins = "gpio5";
+		function = "normal";
+
+		input-enable;
+		bias-pull-down;
+	};
+};
+
 &qusb2phy0 {
 	status = "okay";
 
@@ -503,11 +550,14 @@ &usb3_qmpphy {
 };
 
 &wifi {
+	/* SoC */
 	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l9a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l6a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
-	vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
+
+	/* WiFi / BT PMU */
+	vdd-1.8-xo-supply = <&vreg_pmu_xo>;
+	vdd-1.3-rfa-supply = <&vreg_pmu_rf>;
+	vdd-3.3-ch0-supply = <&vreg_pmu_ch0>;
+	vdd-3.3-ch1-supply = <&vreg_pmu_ch1>;
 
 	qcom,calibration-variant = "Inforce_IFC6560";
 

-- 
2.47.3