From: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
To: ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>,
Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Subject: [PATCH ath-next] wifi: ath12k: Set up MLO after SSR
Date: Fri, 27 Feb 2026 09:41:27 +0530 [thread overview]
Message-ID: <20260227041127.3265879-1-roopni.devanathan@oss.qualcomm.com> (raw)
From: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
During recovery of an MLO setup from a core reset,
ATH12K_GROUP_FLAG_REGISTERED is set because ath12k_mac_unregister is not
called during core reset. So, when an MLO setup is recovering from a core
reset, ath12k_core_mlo_setup() is skipped. Hence, the firmware will not
have information about partner links. This makes MLO association fail
after recovery.
To resolve this, call ath12k_core_mlo_setup() during recovery, to set up
MLO. Also, if MLO setup fails during recovery, call
ath12k_mac_unregister() and ath12k_mac_destroy() to unregister mac and
then tear down the mac structures.
Also, initiate MLO teardown in the hardware group stop sequence to align
with the hardware group start sequence.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
---
drivers/net/wireless/ath/ath12k/core.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index 9dca1a0af73e..218c0a0c9699 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -1017,6 +1017,8 @@ static void ath12k_core_hw_group_stop(struct ath12k_hw_group *ag)
ath12k_mac_unregister(ag);
+ ath12k_mac_mlo_teardown(ag);
+
for (i = ag->num_devices - 1; i >= 0; i--) {
ab = ag->ab[i];
if (!ab)
@@ -1134,8 +1136,14 @@ static int ath12k_core_hw_group_start(struct ath12k_hw_group *ag)
lockdep_assert_held(&ag->mutex);
- if (test_bit(ATH12K_GROUP_FLAG_REGISTERED, &ag->flags))
+ if (test_bit(ATH12K_GROUP_FLAG_REGISTERED, &ag->flags)) {
+ ret = ath12k_core_mlo_setup(ag);
+ if (WARN_ON(ret)) {
+ ath12k_mac_unregister(ag);
+ goto err_mac_destroy;
+ }
goto core_pdev_create;
+ }
ret = ath12k_mac_allocate(ag);
if (WARN_ON(ret))
base-commit: 20ad0d58517073b3b683ff786c65dd3142321707
--
2.43.0
next reply other threads:[~2026-02-27 4:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-27 4:11 Roopni Devanathan [this message]
2026-02-27 10:33 ` [PATCH ath-next] wifi: ath12k: Set up MLO after SSR Vasanthakumar Thiagarajan
2026-02-27 10:35 ` Baochen Qiang
2026-03-02 21:07 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260227041127.3265879-1-roopni.devanathan@oss.qualcomm.com \
--to=roopni.devanathan@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=ramya.gnanasekar@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox