[PATCH v3 0/3] Add support for Qualcomm WCN3610

[Kerigan Creighton <kerigancreighton@gmail.com>]

The WCN3610 is a 2.4GHz-only WLAN/BT combo chip used in some 
cheaper Android and Windows phones such as the Lumia 550, and 
IoT devices like the Anki Vector robot. It shares a lot in 
common with the WCN3620.

This series adds support for the WCN3610 across the necessary 
subsystems:

   * Document the new compatible string (patch 1).
   * Add compatible string in qcom_wcnss_iris (patch 2).
   * Add rf_id and CFGs for the WCN3610 in wcn36xx, disable
     powersave for this specific chip, ensure it is 2.4GHz-only
     (patch 3).

Tested on an Anki Vector 1.0 and 2.0 robot. Support for other 
WCN36xx chips has not been affected.

Changes in v2:
 - Move the Documentation patch to the beginning of the patch set.
 - Move remoteproc compatible string addition to the middle of 
   the patch set.
 - Add Reviewed-by Dmitry (thanks!) to remoteproc compatible patch.
 - Move wcn36xx driver changes to the end of the patch set.

Changes in v3:
 - Describe the hardware rather than the driver in the 
   dt-bindings patch [Krzysztof].
 - Describe why we need a new compatible in the remoteproc 
   patch [Krzysztof].
 - Describe where the CFG values came from in the wcn36xx 
   driver patch [Konrad].

Kerigan Creighton (3):
  dt-bindings: remoteproc: qcom,wcnss-pil: Add wcn3610 compatible
  remoteproc: qcom_wcnss_iris: Add support for WCN3610
  wifi: wcn36xx: Add support for WCN3610

 .../bindings/remoteproc/qcom,wcnss-pil.yaml   |  1 +
 drivers/net/wireless/ath/wcn36xx/main.c       |  4 +-
 drivers/net/wireless/ath/wcn36xx/smd.c        | 61 ++++++++++++++++++-
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h    |  1 +
 drivers/remoteproc/qcom_wcnss_iris.c          |  1 +
 5 files changed, 66 insertions(+), 2 deletions(-)

-- 
2.53.0