[PATCH 13/14] wifi: ath12k: Switch to generic PAS TZ APIs

[Sumit Garg <sumit.garg@kernel.org>]

From: Sumit Garg <sumit.garg@oss.qualcomm.com>

Switch ath12k client driver over to generic PAS TZ APIs. Generic PAS TZ
service allows to support multiple TZ implementation backends like QTEE
based SCM PAS service, OP-TEE based PAS service and any further future TZ
backend service.

Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/ahb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/ahb.c b/drivers/net/wireless/ath/ath12k/ahb.c
index 9a4d34e49104..935f893d04ef 100644
--- a/drivers/net/wireless/ath/ath12k/ahb.c
+++ b/drivers/net/wireless/ath/ath12k/ahb.c
@@ -5,7 +5,7 @@
  */
 
 #include <linux/dma-mapping.h>
-#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_pas.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -415,7 +415,7 @@ static int ath12k_ahb_power_up(struct ath12k_base *ab)
 	}
 
 	/* Authenticate FW image using peripheral ID */
-	ret = qcom_scm_pas_auth_and_reset(pasid);
+	ret = qcom_pas_auth_and_reset(pasid);
 	if (ret) {
 		ath12k_err(ab, "failed to boot the remote processor %d\n", ret);
 		goto err_fw2;
@@ -478,9 +478,9 @@ static void ath12k_ahb_power_down(struct ath12k_base *ab, bool is_suspend)
 	pasid = (u32_encode_bits(ab_ahb->userpd_id, ATH12K_USERPD_ID_MASK)) |
 		ATH12K_AHB_UPD_SWID;
 	/* Release the firmware */
-	ret = qcom_scm_pas_shutdown(pasid);
+	ret = qcom_pas_shutdown(pasid);
 	if (ret)
-		ath12k_err(ab, "scm pas shutdown failed for userPD%d: %d\n",
+		ath12k_err(ab, "pas shutdown failed for userPD%d: %d\n",
 			   ab_ahb->userpd_id, ret);
 }
 
-- 
2.51.0