From: Miri Korenblit <miriam.rachel.korenblit@intel.com>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH wireless-next] wifi: mac80211_hwsim: advertise basic UHR support
Date: Fri, 20 Mar 2026 10:16:28 +0200 [thread overview]
Message-ID: <20260320101624.77af6463920e.I257e525a461c350bed87cfaefc52de25e37afcfb@changeid> (raw)
From: Johannes Berg <johannes.berg@intel.com>
Just add support for ELR, and nothing else since the spec
isn't really all that well-specified yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
---
drivers/net/wireless/virtual/mac80211_hwsim.c | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/net/wireless/virtual/mac80211_hwsim.c b/drivers/net/wireless/virtual/mac80211_hwsim.c
index 82adcc848189..fdadc6fa89bd 100644
--- a/drivers/net/wireless/virtual/mac80211_hwsim.c
+++ b/drivers/net/wireless/virtual/mac80211_hwsim.c
@@ -4641,6 +4641,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_2ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
{
.types_mask = BIT(NL80211_IFTYPE_AP) |
@@ -4749,6 +4754,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_2ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
#ifdef CONFIG_MAC80211_MESH
{
@@ -4918,6 +4928,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_5ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
{
.types_mask = BIT(NL80211_IFTYPE_AP) |
@@ -5043,6 +5058,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_5ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
#ifdef CONFIG_MAC80211_MESH
{
@@ -5236,6 +5256,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_6ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
{
.types_mask = BIT(NL80211_IFTYPE_AP) |
@@ -5382,6 +5407,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_6ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
#ifdef CONFIG_MAC80211_MESH
{
@@ -5473,6 +5503,11 @@ static const struct ieee80211_sband_iftype_data sband_capa_6ghz[] = {
},
/* PPE threshold information is not supported */
},
+ .uhr_cap = {
+ .has_uhr = true,
+ .phy.cap = IEEE80211_UHR_PHY_CAP_ELR_RX |
+ IEEE80211_UHR_PHY_CAP_ELR_TX,
+ },
},
#endif
};
--
2.34.1
reply other threads:[~2026-03-20 8:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260320101624.77af6463920e.I257e525a461c350bed87cfaefc52de25e37afcfb@changeid \
--to=miriam.rachel.korenblit@intel.com \
--cc=emmanuel.grumbach@intel.com \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox