From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Subject: [PATCH rtw-next 5/7] wifi: rtw89: 8922d: add set channel of MAC part
Date: Mon, 23 Mar 2026 11:25:54 +0800 [thread overview]
Message-ID: <20260323032556.19825-6-pkshih@realtek.com> (raw)
In-Reply-To: <20260323032556.19825-1-pkshih@realtek.com>
The set channel is a key function to switch to specific operating channel.
For MAC part, configure hardware according to channel bandwidth, and
enable CCK rate for 2GHz band only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
drivers/net/wireless/realtek/rtw89/reg.h | 1 +
drivers/net/wireless/realtek/rtw89/rtw8922d.c | 92 +++++++++++++++++++
2 files changed, 93 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index 179006c8e499..2195f576facc 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -6801,6 +6801,7 @@
#define R_BE_MUEDCA_EN 0x10370
#define R_BE_MUEDCA_EN_C1 0x14370
#define B_BE_SIFS_TIMEOUT_TB_T2_MASK GENMASK(30, 24)
+#define B_BE_SIFS_MACTXEN_TB_T1_DOT05US_MASK GENMASK(23, 16)
#define B_BE_SIFS_MACTXEN_TB_T1_MASK GENMASK(22, 16)
#define B_BE_MUEDCA_WMM_SEL BIT(8)
#define B_BE_SET_MUEDCATIMER_TF_MASK GENMASK(5, 4)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8922d.c b/drivers/net/wireless/realtek/rtw89/rtw8922d.c
index cbe8e067ae55..a341734ef54d 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8922d.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8922d.c
@@ -5,6 +5,7 @@
#include "debug.h"
#include "efuse.h"
#include "mac.h"
+#include "phy.h"
#include "reg.h"
#include "rtw8922d.h"
@@ -835,6 +836,97 @@ static void rtw8922d_power_trim(struct rtw89_dev *rtwdev)
rtw8922d_pad_bias_trim(rtwdev);
}
+static void rtw8922d_set_channel_mac(struct rtw89_dev *rtwdev,
+ const struct rtw89_chan *chan,
+ u8 mac_idx)
+{
+ u32 sub_carr = rtw89_mac_reg_by_idx(rtwdev, R_BE_TX_SUB_BAND_VALUE, mac_idx);
+ u32 chk_rate = rtw89_mac_reg_by_idx(rtwdev, R_BE_TXRATE_CHK, mac_idx);
+ u32 rf_mod = rtw89_mac_reg_by_idx(rtwdev, R_BE_WMAC_RFMOD, mac_idx);
+ u8 txsb20 = 0, txsb40 = 0, txsb80 = 0;
+ u8 rf_mod_val, chk_rate_mask, sifs;
+ u32 txsb;
+ u32 reg;
+
+ switch (chan->band_width) {
+ case RTW89_CHANNEL_WIDTH_160:
+ txsb80 = rtw89_phy_get_txsb(rtwdev, chan, RTW89_CHANNEL_WIDTH_80);
+ fallthrough;
+ case RTW89_CHANNEL_WIDTH_80:
+ txsb40 = rtw89_phy_get_txsb(rtwdev, chan, RTW89_CHANNEL_WIDTH_40);
+ fallthrough;
+ case RTW89_CHANNEL_WIDTH_40:
+ txsb20 = rtw89_phy_get_txsb(rtwdev, chan, RTW89_CHANNEL_WIDTH_20);
+ break;
+ default:
+ break;
+ }
+
+ switch (chan->band_width) {
+ case RTW89_CHANNEL_WIDTH_160:
+ rf_mod_val = BE_WMAC_RFMOD_160M;
+ txsb = u32_encode_bits(txsb20, B_BE_TXSB_20M_MASK) |
+ u32_encode_bits(txsb40, B_BE_TXSB_40M_MASK) |
+ u32_encode_bits(txsb80, B_BE_TXSB_80M_MASK);
+ break;
+ case RTW89_CHANNEL_WIDTH_80:
+ rf_mod_val = BE_WMAC_RFMOD_80M;
+ txsb = u32_encode_bits(txsb20, B_BE_TXSB_20M_MASK) |
+ u32_encode_bits(txsb40, B_BE_TXSB_40M_MASK);
+ break;
+ case RTW89_CHANNEL_WIDTH_40:
+ rf_mod_val = BE_WMAC_RFMOD_40M;
+ txsb = u32_encode_bits(txsb20, B_BE_TXSB_20M_MASK);
+ break;
+ case RTW89_CHANNEL_WIDTH_20:
+ default:
+ rf_mod_val = BE_WMAC_RFMOD_20M;
+ txsb = 0;
+ break;
+ }
+
+ if (txsb20 <= BE_PRI20_BITMAP_MAX)
+ txsb |= u32_encode_bits(BIT(txsb20), B_BE_PRI20_BITMAP_MASK);
+
+ rtw89_write8_mask(rtwdev, rf_mod, B_BE_WMAC_RFMOD_MASK, rf_mod_val);
+ rtw89_write32(rtwdev, sub_carr, txsb);
+
+ switch (chan->band_type) {
+ case RTW89_BAND_2G:
+ chk_rate_mask = B_BE_BAND_MODE;
+ break;
+ case RTW89_BAND_5G:
+ case RTW89_BAND_6G:
+ chk_rate_mask = B_BE_CHECK_CCK_EN | B_BE_RTS_LIMIT_IN_OFDM6;
+ break;
+ default:
+ rtw89_warn(rtwdev, "Invalid band_type:%d\n", chan->band_type);
+ return;
+ }
+
+ rtw89_write8_clr(rtwdev, chk_rate, B_BE_BAND_MODE | B_BE_CHECK_CCK_EN |
+ B_BE_RTS_LIMIT_IN_OFDM6);
+ rtw89_write8_set(rtwdev, chk_rate, chk_rate_mask);
+
+ switch (chan->band_width) {
+ case RTW89_CHANNEL_WIDTH_160:
+ sifs = 0x8C;
+ break;
+ case RTW89_CHANNEL_WIDTH_80:
+ sifs = 0x8A;
+ break;
+ case RTW89_CHANNEL_WIDTH_40:
+ sifs = 0x84;
+ break;
+ case RTW89_CHANNEL_WIDTH_20:
+ default:
+ sifs = 0x82;
+ }
+
+ reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_MUEDCA_EN, mac_idx);
+ rtw89_write32_mask(rtwdev, reg, B_BE_SIFS_MACTXEN_TB_T1_DOT05US_MASK, sifs);
+}
+
MODULE_FIRMWARE(RTW8922D_MODULE_FIRMWARE);
MODULE_FIRMWARE(RTW8922DS_MODULE_FIRMWARE);
MODULE_AUTHOR("Realtek Corporation");
--
2.25.1
next prev parent reply other threads:[~2026-03-23 3:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-23 3:25 [PATCH rtw-next 0/7] wifi: rtw89: 8922d: add RTL8922D common routine part 1 Ping-Ke Shih
2026-03-23 3:25 ` [PATCH rtw-next 1/7] wifi: rtw89: 8922d: add definition of quota, registers and efuse block Ping-Ke Shih
2026-03-23 3:25 ` [PATCH rtw-next 2/7] wifi: rtw89: 8922d: add power on/off functions Ping-Ke Shih
2026-03-23 3:25 ` [PATCH rtw-next 3/7] wifi: rtw89: 8922d: define efuse map and read necessary fields Ping-Ke Shih
2026-03-23 3:25 ` [PATCH rtw-next 4/7] wifi: rtw89: 8922d: read and configure RF by calibration data from efuse physical map Ping-Ke Shih
2026-03-23 3:25 ` Ping-Ke Shih [this message]
2026-03-23 3:25 ` [PATCH rtw-next 6/7] wifi: rtw89: 8922d: add set channel of BB part Ping-Ke Shih
2026-03-23 10:53 ` Bitterblue Smith
2026-03-24 0:49 ` Ping-Ke Shih
2026-03-23 3:25 ` [PATCH rtw-next 7/7] wifi: rtw89: 8922d: add set channel of RF part Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260323032556.19825-6-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox