[PATCH rtw-next 8/8] wifi: rtw89: fw: load TX power elements according to AID

[Ping-Ke Shih <pkshih@realtek.com>]

From: Zong-Zhe Yang <kevin_yang@realtek.com>

For different A-die, there will be different TX power parameters.
In FW element header, the corresponding A-die ID will be described.
So, compare runtime AID with that to load the target TX power
parameters.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/fw.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw89/fw.c b/drivers/net/wireless/realtek/rtw89/fw.c
index 13391ec9627c..52db41c67265 100644
--- a/drivers/net/wireless/realtek/rtw89/fw.c
+++ b/drivers/net/wireless/realtek/rtw89/fw.c
@@ -1153,8 +1153,13 @@ int rtw89_fw_recognize_txpwr_from_elm(struct rtw89_dev *rtwdev,
 	const struct __rtw89_fw_txpwr_element *txpwr_elm = &elm->u.txpwr;
 	const unsigned long offset = arg.offset;
 	struct rtw89_efuse *efuse = &rtwdev->efuse;
+	struct rtw89_hal *hal = &rtwdev->hal;
+	u16 aid = le16_to_cpu(elm->aid);
 	struct rtw89_txpwr_conf *conf;
 
+	if (aid && aid != hal->aid)
+		return 1;
+
 	if (!rtwdev->rfe_data) {
 		rtwdev->rfe_data = kzalloc_obj(*rtwdev->rfe_data);
 		if (!rtwdev->rfe_data)
-- 
2.25.1