[PATCH v5 1/3] dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests

David Heidelberg via B4 Relay
2026-04-07T06:44:00Z

Some firmware versions do not support the host-capability QMI request.
Since this request occurs before firmware and board files are loaded,
the quirk cannot be expressed in the firmware itself and must be described
in the device tree.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
.../devicetree/bindings/net/wireless/qcom,ath10k.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index f2440d39b7ebc..c21d66c7cd558 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -171,6 +171,12 @@ properties:
Quirk specifying that the firmware expects the 8bit version
of the host capability QMI request

+ qcom,snoc-host-cap-skip-quirk:
+ type: boolean
+ description:
+ Quirk specifying that the firmware wants to skip the host
+ capability QMI request
+
qcom,xo-cal-data:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -292,6 +298,11 @@ allOf:
required:
- interrupts

+ - not:
+ required:
+ - qcom,snoc-host-cap-8bit-quirk
+ - qcom,snoc-host-cap-skip-quirk
+
examples:
# SNoC
- |

--
2.53.0