From: Louis Kotze <loukot@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: pkshih@realtek.com, rtl8821cerfe2@gmail.com,
linux-kernel@vger.kernel.org, Louis Kotze <loukot@gmail.com>
Subject: [PATCH 0/2] wifi: rtw89: fix RF calibration for USB transport
Date: Fri, 10 Apr 2026 10:00:15 +0200 [thread overview]
Message-ID: <20260410080017.82946-1-loukot@gmail.com> (raw)
In-Reply-To: <795a8567fdbe48babc5cf0f2b5e10c0a@realtek.com>
RF calibration on USB adapters (RTL8922AU) fails frequently because the
timeout values in rtw89_phy_rfk_report_wait() are designed for PCIe and
too tight for USB H2C/C2H round-trip latency.
Patch 1 applies a 4x timeout multiplier for USB devices, based on
measured calibration times from two independent testers across 2.4GHz,
5GHz, and 6GHz bands.
Patch 2 makes calibration timeouts non-fatal on USB, since the radio
continues to operate correctly despite occasional incomplete
calibrations. PCIe error handling is unchanged.
This is based on Ping-Ke's suggestion in the RTL8922AU support thread:
https://lore.kernel.org/linux-wireless/795a8567fdbe48babc5cf0f2b5e10c0a@realtek.com/
Louis Kotze (2):
wifi: rtw89: phy: increase RF calibration timeouts for USB transport
wifi: rtw89: phy: make RF calibration timeouts non-fatal on USB
drivers/net/wireless/realtek/rtw89/phy.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--
2.53.0
next prev parent reply other threads:[~2026-04-10 8:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-26 17:02 [PATCH rtw-next 00/12] wifi: rtw89: Add support for RTL8922AU Bitterblue Smith
2026-03-26 17:03 ` [PATCH rtw-next 01/12] wifi: rtw89: usb: Disable MLO for now Bitterblue Smith
2026-03-30 2:59 ` Ping-Ke Shih
2026-04-04 14:07 ` Bitterblue Smith
2026-03-26 17:04 ` [PATCH rtw-next 02/12] wifi: rtw89: usb: Support 2 bulk in endpoints Bitterblue Smith
2026-03-30 3:16 ` Ping-Ke Shih
2026-03-26 17:04 ` [PATCH rtw-next 03/12] wifi: rtw89: Fix rtw89_usb_ops_mac_lv1_rcvy() for RTL8922AU Bitterblue Smith
2026-03-30 3:36 ` Ping-Ke Shih
2026-03-26 17:05 ` [PATCH rtw-next 04/12] wifi: rtw89: Fix rtw89_usb_ops_mac_pre_init() " Bitterblue Smith
2026-03-30 3:39 ` Ping-Ke Shih
2026-03-26 17:05 ` [PATCH rtw-next 05/12] wifi: rtw89: Fix rtw89_usb_ops_mac_post_init() " Bitterblue Smith
2026-03-30 3:41 ` Ping-Ke Shih
2026-03-26 17:06 ` [PATCH rtw-next 06/12] wifi: rtw89: usb: Enable RX aggregation " Bitterblue Smith
2026-03-30 3:46 ` Ping-Ke Shih
2026-04-01 22:58 ` Bitterblue Smith
2026-03-26 17:06 ` [PATCH rtw-next 07/12] wifi: rtw89: Fix rtw8922a_pwr_{on,off}_func() for USB Bitterblue Smith
2026-03-30 3:54 ` Ping-Ke Shih
2026-03-26 17:07 ` [PATCH rtw-next 08/12] wifi: rtw89: Let hfc_param_ini have separate settings for USB 2/3 Bitterblue Smith
2026-03-30 3:59 ` Ping-Ke Shih
2026-03-26 17:08 ` [PATCH rtw-next 09/12] wifi: rtw89: Add rtw8922a_hfc_param_ini_usb{2,3} Bitterblue Smith
2026-03-30 4:01 ` Ping-Ke Shih
2026-03-26 17:08 ` [PATCH rtw-next 10/12] wifi: rtw89: Add rtw8922a_dle_mem_usb{2,3} Bitterblue Smith
2026-03-30 4:25 ` Ping-Ke Shih
2026-03-26 17:09 ` [PATCH rtw-next 11/12] wifi: rtw89: Add rtw8922au.c Bitterblue Smith
2026-03-30 4:27 ` Ping-Ke Shih
2026-03-26 17:09 ` [PATCH rtw-next 12/12] wifi: rtw89: Enable the new rtw89_8922au module Bitterblue Smith
2026-03-30 4:30 ` Ping-Ke Shih
2026-03-30 2:53 ` [PATCH rtw-next 00/12] wifi: rtw89: Add support for RTL8922AU Ping-Ke Shih
2026-04-01 17:43 ` Bitterblue Smith
2026-04-02 0:48 ` Ping-Ke Shih
2026-04-07 20:41 ` Bitterblue Smith
2026-04-08 0:46 ` Ping-Ke Shih
2026-04-10 8:00 ` Louis Kotze [this message]
2026-04-10 8:00 ` [PATCH 1/2] wifi: rtw89: phy: increase RF calibration timeouts for USB transport Louis Kotze
2026-04-14 6:32 ` Ping-Ke Shih
2026-04-15 11:13 ` Louis Kotze
2026-04-10 8:00 ` [PATCH 2/2] wifi: rtw89: phy: make RF calibration timeouts non-fatal on USB Louis Kotze
2026-04-14 6:39 ` Ping-Ke Shih
2026-04-15 11:13 ` Louis Kotze
2026-04-15 11:13 ` [PATCH v2] wifi: rtw89: phy: increase RF calibration timeouts for USB transport Louis Kotze
2026-04-16 1:15 ` Ping-Ke Shih
2026-04-16 4:56 ` Louis Kotze
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260410080017.82946-1-loukot@gmail.com \
--to=loukot@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=rtl8821cerfe2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox