public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Ping-Ke Shih <pkshih@realtek.com>
To: <linux-wireless@vger.kernel.org>
Cc: <leo.li@realtek.com>, <gary.chang@realtek.com>,
	<echuang@realtek.com>, <wenjie.tsai@realtek.com>,
	<phhuang@realtek.com>, <isaiah@realtek.com>,
	<kevin_yang@realtek.com>, <mh_chen@realtek.com>
Subject: [PATCH rtw-next 14/16] wifi: rtw89: suspend DIG when remain-on-channel
Date: Mon, 20 Apr 2026 11:40:49 +0800	[thread overview]
Message-ID: <20260420034051.17666-15-pkshih@realtek.com> (raw)
In-Reply-To: <20260420034051.17666-1-pkshih@realtek.com>

From: Chih-Kang Chang <gary.chang@realtek.com>

The PD (Packet Detection) lower bound is set after the STA interface
connects. When the P2P interface attempts to find peers, it enters
the remain-on-channel flow to listen for probe requests. However, if
the RSSI of the connected AP is too high, the P2P interface fails to
receive it. To resolve this, suspend the DIG during the
remain-on-channel period.

Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 7fe979e47ad5..41eefe901ab2 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -4474,6 +4474,7 @@ void rtw89_roc_start(struct rtw89_dev *rtwdev, struct rtw89_vif *rtwvif)
 	reg = rtw89_mac_reg_by_idx(rtwdev, mac->rx_fltr, rtwvif_link->mac_idx);
 	rtw89_write32_clr(rtwdev, reg, B_AX_A_UC_CAM_MATCH | B_AX_A_BC_CAM_MATCH);
 
+	rtw89_phy_dig_suspend(rtwdev);
 	ieee80211_ready_on_channel(hw);
 	wiphy_delayed_work_cancel(hw->wiphy, &rtwvif->roc.roc_work);
 	wiphy_delayed_work_queue(hw->wiphy, &rtwvif->roc.roc_work,
@@ -4518,6 +4519,7 @@ void rtw89_roc_end(struct rtw89_dev *rtwdev, struct rtw89_vif *rtwvif)
 
 	rtw89_core_handle_sta_pending_tx(rtwdev, rtwvif_link);
 	queue_work(rtwdev->txq_wq, &rtwdev->txq_work);
+	rtw89_phy_dig_resume(rtwdev, true);
 
 	if (hw->conf.flags & IEEE80211_CONF_IDLE)
 		wiphy_delayed_work_queue(hw->wiphy, &roc->roc_work,
-- 
2.25.1


  parent reply	other threads:[~2026-04-20  3:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-20  3:40 [PATCH rtw-next 00/16] wifi: rtw89: add USB IO offload and some refactors Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 01/16] wifi: rtw89: 8922d: fix typo rx_freq_frome_ie Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 02/16] wifi: rtw89: 8852a: refine power save to lower latency Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 03/16] wifi: rtw89: debug: disable hw_scan for latency-sensitive scenarios Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 04/16] wifi: rtw89: debug: disable inactive power save to reduce bus overhead Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 05/16] wifi: rtw89: phy: support static PD level setting Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 06/16] wifi: rtw89: Correct data type for scan index to avoid infinite loop Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 07/16] wifi: rtw89: 8852bt: configure support_noise field explicitly Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 08/16] wifi: rtw89: add IO offload support via firmware Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 09/16] wifi: rtw89: offload DMAC and CMAC init IO to firmware Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 10/16] wifi: rtw89: use firmware offload for PHY and RF batch register writes Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 11/16] wifi: rtw89: 8832cu: Add ID 2c7c:8206 for RTL8832CU Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 12/16] wifi: rtw89: use struct to fill C2H recv ack Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 13/16] wifi: rtw89: check scan C2H event recv ack instead of C2H event done ack Ping-Ke Shih
2026-04-20  3:40 ` Ping-Ke Shih [this message]
2026-04-20  3:40 ` [PATCH rtw-next 15/16] wifi: rtw89: chan: introduce new helper to get entity current configuration Ping-Ke Shih
2026-04-20  3:40 ` [PATCH rtw-next 16/16] wifi: rtw89: 8922d: update RF calibration flow for MLD Ping-Ke Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260420034051.17666-15-pkshih@realtek.com \
    --to=pkshih@realtek.com \
    --cc=echuang@realtek.com \
    --cc=gary.chang@realtek.com \
    --cc=isaiah@realtek.com \
    --cc=kevin_yang@realtek.com \
    --cc=leo.li@realtek.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mh_chen@realtek.com \
    --cc=phhuang@realtek.com \
    --cc=wenjie.tsai@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox