From: Alessio Ferri <alessio.ferri@mythread.it>
To: linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/7] b43: complete N-PHY rev 8 + radio 2057 rev 8
Date: Sun, 24 May 2026 23:35:08 +0200 [thread overview]
Message-ID: <20260524233508.03ebe015@fedora> (raw)
In-Reply-To: <20260524233228.06b38dba@fedora>
Add the 2.4 GHz IPA TX gain table for N-PHY rev 8 paired with radio
2057 rev 8 and wire it to the existing dispatcher.
b43_nphy_get_ipa_gain_table() in tables_nphy.c currently handles
case 8 only for radio_rev == 5; radio_rev == 8 falls through and
the function logs:
b43-phyX ERROR: No 2GHz IPA gain table available for this device
b43-phyX ERROR: PHY init: Channel switch to default failed
leaving b43_phy_init() to return an error and core_init to abort
before the MAC is enabled.
The high byte of every entry differs from the rev 5 sibling (0x40
vs 0x30): different PAD-gain code prefix for the rev 8 front-end.
The low 24 bits coincide with rev 5 across the whole table - the
gain step amplitudes are the same, only the PAD-gain selector
prefix changes.
Values extracted from an MMIO dump of the proprietary Broadcom wl
driver running on BCM6362 silicon (wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
drivers/net/wireless/broadcom/b43/tables_nphy.c | 39
+++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/drivers/net/wireless/broadcom/b43/tables_nphy.c
b/drivers/net/wireless/broadcom/b43/tables_nphy.c index
41a25d909..84e8d718d 100644 ---
a/drivers/net/wireless/broadcom/b43/tables_nphy.c +++
b/drivers/net/wireless/broadcom/b43/tables_nphy.c @@ -2715,6 +2715,43
@@ static const u32 b43_ntab_tx_gain_ipa_2057_rev5_2g[] = { 0x300f0715,
0x300f0715, 0x300f0715, 0x300f0715, };
+/* Extracted from MMIO dump of 6.30.102.7 */
+static const u32 b43_ntab_tx_gain_ipa_2057_rev8_2g[] = {
+ 0x40ff0031, 0x40e70031, 0x40e7002e, 0x40cf002e,
+ 0x40bf002e, 0x40af002e, 0x409f002f, 0x407f0033,
+ 0x407f0031, 0x407f002e, 0x4077002e, 0x406f002e,
+ 0x4067002e, 0x405f002f, 0x40570030, 0x4057002d,
+ 0x404f002e, 0x40470031, 0x4047002e, 0x4047002c,
+ 0x40470029, 0x403f002c, 0x403f0029, 0x4037002d,
+ 0x4037002a, 0x40370028, 0x402f002c, 0x402f002a,
+ 0x402f0028, 0x402f0026, 0x4027002c, 0x40270029,
+ 0x40270027, 0x40270025, 0x40270023, 0x401f002c,
+ 0x401f002a, 0x401f0028, 0x401f0025, 0x401f0024,
+ 0x401f0022, 0x401f001f, 0x4017002d, 0x4017002b,
+ 0x40170028, 0x40170026, 0x40170024, 0x40170022,
+ 0x40170020, 0x4017001e, 0x4017001d, 0x4017001b,
+ 0x4017001a, 0x40170018, 0x40170017, 0x40170015,
+ 0x400f002c, 0x400f0029, 0x400f0027, 0x400f0024,
+ 0x400f0022, 0x400f0021, 0x400f001f, 0x400f001d,
+ 0x400f001b, 0x400f001a, 0x400f0018, 0x400f0017,
+ 0x400f0016, 0x400f0015, 0x400f0115, 0x400f0215,
+ 0x400f0315, 0x400f0415, 0x400f0515, 0x400f0615,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+ 0x400f0715, 0x400f0715, 0x400f0715, 0x400f0715,
+};
+
+
/* Extracted from MMIO dump of 6.30.223.141 */
static const u32 b43_ntab_tx_gain_ipa_2057_rev9_2g[] = {
0x60ff0031, 0x60e7002c, 0x60cf002a, 0x60c70029,
@@ -3651,6 +3688,8 @@ static const u32
*b43_nphy_get_ipa_gain_table(struct b43_wldev *dev) case 8:
if (phy->radio_rev == 5)
return
b43_ntab_tx_gain_ipa_2057_rev5_2g;
+ if (phy->radio_rev == 8)
+ return
b43_ntab_tx_gain_ipa_2057_rev8_2g; break;
case 6:
if (dev->dev->chip_id == BCMA_CHIP_ID_BCM47162)
--
2.54.0
next prev parent reply other threads:[~2026-05-24 21:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-24 21:32 [PATCH v2 0/7] b43: complete N-PHY rev 8 + radio 2057 rev 8 Alessio Ferri
2026-05-24 21:33 ` Alessio Ferri
2026-05-24 21:33 ` Alessio Ferri
2026-05-24 21:34 ` Alessio Ferri
2026-05-24 21:34 ` Alessio Ferri
2026-05-24 21:35 ` Alessio Ferri [this message]
2026-05-24 21:35 ` [PATCH v2 6/7] " Alessio Ferri
2026-05-24 21:36 ` [PATCH v2 7/7] " Alessio Ferri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260524233508.03ebe015@fedora \
--to=alessio.ferri@mythread.it \
--cc=b43-dev@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox