Linux wireless drivers development
 help / color / mirror / Atom feed
From: William Hansen-Baird <william.hansen.baird@gmail.com>
To: pkshih@realtek.com
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	William Hansen-Baird <william.hansen.baird@gmail.com>
Subject: [PATCH rtw-next v2] wifi: rtlwifi: rtl8723be: Remove unnecessary irq save/restore in hw_init()
Date: Tue,  9 Jun 2026 11:53:59 +0200	[thread overview]
Message-ID: <20260609095359.2964193-1-william.hansen.baird@gmail.com> (raw)
In-Reply-To: <20260608135345.2526325-3-williamhb+k@fastmail.com>

rtl8723be hw_init() calls local_save_flags(flags) followed by
local_irq_enable(). Later, local_irq_restore(flags) is called.

This causes warnings from Lockdep on boot and modprobe,
as local_irq_restore(flags) should only be called while irqs are disabled.
The warning was introduced to detect this class of bug in [1].

With testing I found that all paths which call hw_init() have irqs
already enabled for rtl8723be.

Furthermore, the calls were originally added for the rtl8192ce
in commit f78bccd79ba3 ("rtlwifi: rtl8192ce: Fix too long disable of IRQs")
before later being added to most other rtlwifi drivers.

Commit d3feae41a347 ("rtlwifi: Update power-save routines for 062814 driver")
then replaces the call to spin_lock_irqsave() before hw_init(),
and thus the codepath which caused irqs to be disabled in hw_init and
prompted the original commit has been removed.

The same irq save/restore pattern is also present in the hw_init() of
rtl8192ce, rtl8723ae, rtl8188ee, rtl8192se and rtl8192cu,
however I don't have the hardware to test them,
so I did not include them in my changes.

Tested on a Razer Blade 14 2017.

Example of output from Lockdep prior to fix:

raw_local_irq_restore() called with IRQs enabled

...

Call Trace:
<TASK>
rtl8723be_hw_init+0x5992/0x7220 [rtl8723be]
? static_obj+0x61/0xa0
rtl_pci_start+0x222/0x5c0 [rtl_pci]
rtl_op_start+0x128/0x1a0 [rtlwifi]
? __kasan_check_read+0x11/0x20
drv_start+0x16c/0x550 [mac80211]

...

irq event stamp: 887679
hardirqs last  enabled at (887689): [<ffffffff96511170>] __up_console_sem+0x90/0xa0
hardirqs last disabled at (887698): [<ffffffff96511155>] __up_console_sem+0x75/0xa0
softirqs last  enabled at (887670): [<ffffffff962f4675>] __irq_exit_rcu+0x175/0x2f0
softirqs last disabled at (887649): [<ffffffff962f4675>] __irq_exit_rcu+0x175/0x2f0
---[ end trace 0000000000000000 ]---

[1] https://lore.kernel.org/all/20210111153707.10071-1-mark.rutland@arm.com/

Signed-off-by: William Hansen-Baird <william.hansen.baird@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
Changes since v1:
- Remove timestamps from dmesg output
- Use [1] footnote style for link
- Fix subject prefix to rtw-next

 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index e1f811218894..bf7b5a32adaa 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -1333,11 +1333,6 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
 	bool rtstatus = true;
 	int err;
 	u8 tmp_u1b;
-	unsigned long flags;
-
-	/* reenable interrupts to not interfere with other devices */
-	local_save_flags(flags);
-	local_irq_enable();
 
 	rtlhal->fw_ready = false;
 	rtlpriv->rtlhal.being_init_adapter = true;
@@ -1443,7 +1438,6 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
 
 	rtl8723be_dm_init(hw);
 exit:
-	local_irq_restore(flags);
 	rtlpriv->rtlhal.being_init_adapter = false;
 	return err;
 }
-- 
2.54.0


      parent reply	other threads:[~2026-06-09  9:54 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-08 13:53 [PATCH] wifi: rtlwifi: rtl8723be: Remove unnecessary irq save/restore in hw_init() William Hansen-Baird
2026-06-09  3:11 ` Ping-Ke Shih
2026-06-09  9:21   ` William Hansen-Baird
2026-06-09  9:53 ` William Hansen-Baird [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260609095359.2964193-1-william.hansen.baird@gmail.com \
    --to=william.hansen.baird@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox