[PATCH v8 2/3] PCI: Add device-specific reset for Qualcomm devices

[Jose Ignacio Tornos Martinez <jtornosm@redhat.com>]

Some Qualcomm PCIe devices (WCN6855/WCN7850 WiFi cards, SDX62/SDX65 modems)
lack working reset methods for VFIO passthrough scenarios. These devices
have no FLR capability, advertise NoSoftRst+ (blocking PM reset), and have
broken bus reset.

The problem manifests in VFIO passthrough scenarios:

- WCN6855 WiFi card (17cb:1103): Normal VM operation works fine, including
  clean shutdown/reboot. However, when the VM terminates uncleanly
  (crash, force-off), VFIO attempts to reset the device before it can
  be assigned to another VM. Without a working reset method, the device
  remains in an undefined state, preventing reuse.

- WCN7850 WiFi card (17cb:1107): Same behavior as WCN6855.

- SDX62/SDX65 5G modems (17cb:0308): Never successfully initialize even
  on first VM assignment without proper reset capability.

Add device-specific reset entries for these Qualcomm devices using D3cold
power cycling with automatic D3hot fallback. The implementation uses
pci_set_power_state(D3cold) which automatically falls back to D3hot on
platforms without ACPI _PR3 power resources. While not a complete reset
(BARs preserved), testing shows D3hot transition provides sufficient reset
for VFIO reuse.

Extract a shared pci_dev_d3cold_d0_cycle() helper function to avoid code
duplication between pci_d3cold_reset() (strict _PR3 requirement) and the
new reset_d3cold_d3hot() device-specific reset (automatic fallback).
The helper performs only the power cycle; IOMMU handling is done by the
caller (pci_d3cold_reset() for general method, __pci_dev_specific_reset()
wrapper for device-specific methods).

Device-specific reset is position #1 in the reset hierarchy, so these
Qualcomm devices will use power cycling as their primary reset method,
with the general d3cold method (position #8) available as a fallback on
_PR3-capable platforms if users override via sysfs.

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
v8: Fix commit message: correct IOMMU handling description. The helper
    performs only the power cycle; IOMMU is handled by callers (this was
    v6 fix)
v7: https://lore.kernel.org/all/20260603105853.326290-3-jtornosm@redhat.com/

 drivers/pci/pci.c    | 37 +++++++++++++++++++++++++++----------
 drivers/pci/pci.h    |  1 +
 drivers/pci/quirks.c | 19 +++++++++++++++++++
 3 files changed, 47 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 096868f80cd4..f7a7443287fd 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4491,6 +4491,32 @@ static int pci_pm_reset(struct pci_dev *dev, bool probe)
 	return ret;
 }
 
+/**
+ * pci_dev_d3cold_d0_cycle - Perform D3cold->D0 power cycle
+ * @dev: Device to power cycle
+ *
+ * Common helper to perform D3cold->D0 power cycle for reset methods.
+ * Attempts D3cold transition with automatic fallback to D3hot on platforms
+ * without ACPI _PR3 power resources.
+ *
+ * Caller must handle IOMMU preparation/cleanup if needed.
+ *
+ * Returns 0 on success, negative error code on failure.
+ */
+int pci_dev_d3cold_d0_cycle(struct pci_dev *dev)
+{
+	int ret;
+
+	if (dev->current_state != PCI_D0)
+		return -EINVAL;
+
+	ret = pci_set_power_state(dev, PCI_D3cold);
+	if (ret)
+		return ret;
+
+	return pci_set_power_state(dev, PCI_D0);
+}
+
 /**
  * pci_d3cold_reset - Put device into D3cold and back to D0 for reset
  * @dev: PCI device to reset
@@ -4520,22 +4546,13 @@ static int pci_d3cold_reset(struct pci_dev *dev, bool probe)
 	if (probe)
 		return 0;
 
-	if (dev->current_state != PCI_D0)
-		return -EINVAL;
-
 	ret = pci_dev_reset_iommu_prepare(dev);
 	if (ret) {
 		pci_err(dev, "failed to stop IOMMU for a PCI reset: %d\n", ret);
 		return ret;
 	}
 
-	ret = pci_set_power_state(dev, PCI_D3cold);
-	if (ret)
-		goto done;
-
-	ret = pci_set_power_state(dev, PCI_D0);
-
-done:
+	ret = pci_dev_d3cold_d0_cycle(dev);
 	pci_dev_reset_iommu_done(dev);
 	return ret;
 }
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4a14f88e543a..a9942787de9e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -234,6 +234,7 @@ void pci_init_reset_methods(struct pci_dev *dev);
 int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
 int pci_bus_error_reset(struct pci_dev *dev);
 int pci_try_reset_bridge(struct pci_dev *bridge);
+int pci_dev_d3cold_d0_cycle(struct pci_dev *dev);
 
 struct pci_cap_saved_data {
 	u16		cap_nr;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e49136ac5dbf..70f3b0f26799 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4237,6 +4237,22 @@ static int reset_hinic_vf_dev(struct pci_dev *pdev, bool probe)
 	return 0;
 }
 
+/*
+ * Device-specific reset method via D3cold/D3hot power cycle.
+ *
+ * Some devices lack working FLR, advertise NoSoftRst+ (blocking PM reset),
+ * and have broken bus reset. This function provides device-specific reset via
+ * power cycling, attempting D3cold with automatic fallback to D3hot on platforms
+ * without ACPI _PR3 power resources.
+ */
+static int reset_d3cold_d3hot(struct pci_dev *dev, bool probe)
+{
+	if (probe)
+		return 0;
+
+	return pci_dev_d3cold_d0_cycle(dev);
+}
+
 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
 		 reset_intel_82599_sfp_virtfn },
@@ -4252,6 +4268,9 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 		reset_chelsio_generic_dev },
 	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
 		reset_hinic_vf_dev },
+	{ PCI_VENDOR_ID_QCOM, 0x1103, reset_d3cold_d3hot },  /* WCN6855 */
+	{ PCI_VENDOR_ID_QCOM, 0x1107, reset_d3cold_d3hot },  /* WCN7850 */
+	{ PCI_VENDOR_ID_QCOM, 0x0308, reset_d3cold_d3hot },  /* SDX62/SDX65 */
 	{ 0 }
 };
 
-- 
2.54.0