From: Lachlan Hodges <lachlan.hodges@morsemicro.com>
To: johannes@sipsolutions.net,
Lachlan Hodges <lachlan.hodges@morsemicro.com>,
Dan Callaghan <dan.callaghan@morsemicro.com>,
Arien Judge <arien.judge@morsemicro.com>
Cc: ayman.grais@morsemicro.com, linux-wireless@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH wireless-next v3 03/33] wifi: mm81x: add bus.h
Date: Fri, 26 Jun 2026 16:28:59 +1000 [thread overview]
Message-ID: <20260626063014.1275235-4-lachlan.hodges@morsemicro.com> (raw)
In-Reply-To: <20260626063014.1275235-1-lachlan.hodges@morsemicro.com>
(Patches split per file for review, will be a single commit alongside
SDIO ids once review is complete. See cover letter for more
information)
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
---
drivers/net/wireless/morsemicro/mm81x/bus.h | 99 +++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 drivers/net/wireless/morsemicro/mm81x/bus.h
diff --git a/drivers/net/wireless/morsemicro/mm81x/bus.h b/drivers/net/wireless/morsemicro/mm81x/bus.h
new file mode 100644
index 000000000000..d2ccabc037fb
--- /dev/null
+++ b/drivers/net/wireless/morsemicro/mm81x/bus.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2026 Morse Micro
+ */
+
+#ifndef _MM81X_BUS_H_
+#define _MM81X_BUS_H_
+
+#include <linux/skbuff.h>
+#include "core.h"
+
+enum mm81x_bus_type {
+ MM81X_BUS_TYPE_USB,
+ MM81X_BUS_TYPE_SDIO,
+};
+
+struct mm81x_bus_ops {
+ int (*dm_read)(struct mm81x *mors, u32 addr, u8 *data, int len);
+ int (*dm_write)(struct mm81x *mors, u32 addr, const u8 *data, int len);
+ int (*reg32_read)(struct mm81x *mors, u32 addr, u32 *data);
+ int (*reg32_write)(struct mm81x *mors, u32 addr, u32 data);
+ int (*digital_reset)(struct mm81x *mors);
+ void (*set_bus_enable)(struct mm81x *mors, bool enable);
+ void (*config_burst_mode)(struct mm81x *mors, bool enable_burst);
+ void (*claim)(struct mm81x *mors);
+ void (*set_irq)(struct mm81x *mors, bool enable);
+ void (*release)(struct mm81x *mors);
+ unsigned int bulk_alignment;
+};
+
+/*
+ * Default TX alignment for buses which don't care. mac80211 will give us
+ * SKBs aligned to the 2 byte boundary, so 2 is effectively a noop.
+ */
+#define MM81X_BUS_DEFAULT_BULK_ALIGNMENT (2)
+
+/* mm81x_dm_read - len must be rounded up to the nearest 4-byte boundary */
+static inline int mm81x_dm_read(struct mm81x *mors, u32 addr, u8 *data, int len)
+{
+ return mors->bus_ops->dm_read(mors, addr, data, len);
+}
+
+static inline int mm81x_dm_write(struct mm81x *mors, u32 addr, const u8 *data,
+ int len)
+{
+ return mors->bus_ops->dm_write(mors, addr, data, len);
+}
+
+static inline int mm81x_reg32_read(struct mm81x *mors, u32 addr, u32 *data)
+{
+ return mors->bus_ops->reg32_read(mors, addr, data);
+}
+
+static inline int mm81x_reg32_write(struct mm81x *mors, u32 addr, u32 data)
+{
+ return mors->bus_ops->reg32_write(mors, addr, data);
+}
+
+static inline int mm81x_bus_digital_reset(struct mm81x *mors)
+{
+ if (mors->bus_ops->digital_reset)
+ return mors->bus_ops->digital_reset(mors);
+
+ return 0;
+}
+
+static inline void mm81x_set_bus_enable(struct mm81x *mors, bool enable)
+{
+ mors->bus_ops->set_bus_enable(mors, enable);
+}
+
+static inline void mm81x_bus_config_burst_mode(struct mm81x *mors,
+ bool enable_burst)
+{
+ if (mors->bus_ops->config_burst_mode)
+ mors->bus_ops->config_burst_mode(mors, enable_burst);
+}
+
+static inline void mm81x_claim_bus(struct mm81x *mors)
+{
+ mors->bus_ops->claim(mors);
+}
+
+static inline void mm81x_bus_set_irq(struct mm81x *mors, bool enable)
+{
+ mors->bus_ops->set_irq(mors, enable);
+}
+
+static inline void mm81x_release_bus(struct mm81x *mors)
+{
+ mors->bus_ops->release(mors);
+}
+
+static inline unsigned int mm81x_bus_get_alignment(struct mm81x *mors)
+{
+ return mors->bus_ops->bulk_alignment;
+}
+
+#endif /* !_MM81X_BUS_H_ */
--
2.43.0
next prev parent reply other threads:[~2026-06-26 6:30 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 6:28 [PATCH wireless-next v3 00/33] wifi: mm81x: add mm81x driver Lachlan Hodges
2026-06-26 6:28 ` [PATCH wireless-next v3 01/33] wifi: cfg80211: introduce helper to get S1G primary width Lachlan Hodges
2026-06-26 6:28 ` [PATCH wireless-next v3 02/33] wifi: ieee80211: introduce generic KHZ_TO_HZ helper Lachlan Hodges
2026-06-26 6:28 ` Lachlan Hodges [this message]
2026-06-26 6:29 ` [PATCH wireless-next v3 04/33] wifi: mm81x: add command.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 05/33] wifi: mm81x: add command_defs.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 06/33] wifi: mm81x: add command.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 07/33] wifi: mm81x: add core.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 08/33] wifi: mm81x: add core.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 09/33] wifi: mm81x: add fw.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 10/33] wifi: mm81x: add fw.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 11/33] wifi: mm81x: add hif.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 12/33] wifi: mm81x: add hw.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 13/33] wifi: mm81x: add hw.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 14/33] wifi: mm81x: add mac.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 15/33] wifi: mm81x: add mac.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 16/33] wifi: mm81x: add mmrc.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 17/33] wifi: mm81x: add mmrc.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 18/33] wifi: mm81x: add ps.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 19/33] wifi: mm81x: add ps.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 20/33] wifi: mm81x: add rate_code.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 21/33] wifi: mm81x: add rc.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 22/33] wifi: mm81x: add rc.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 23/33] mmc: sdio: add Morse Micro vendor ids Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 24/33] wifi: mm81x: add sdio.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 25/33] wifi: mm81x: add skbq.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 26/33] wifi: mm81x: add skbq.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 27/33] wifi: mm81x: add usb.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 28/33] wifi: mm81x: add yaps.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 29/33] wifi: mm81x: add yaps.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 30/33] wifi: mm81x: add yaps_hw.c Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 31/33] wifi: mm81x: add yaps_hw.h Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 32/33] wifi: mm81x: add Kconfig and Makefile Lachlan Hodges
2026-06-26 6:29 ` [PATCH wireless-next v3 33/33] wifi: mm81x: add MAINTAINERS entry Lachlan Hodges
2026-06-29 0:13 ` [PATCH wireless-next v3 00/33] wifi: mm81x: add mm81x driver Lachlan Hodges
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626063014.1275235-4-lachlan.hodges@morsemicro.com \
--to=lachlan.hodges@morsemicro.com \
--cc=arien.judge@morsemicro.com \
--cc=ayman.grais@morsemicro.com \
--cc=dan.callaghan@morsemicro.com \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox