Linux wireless drivers development
 help / color / mirror / Atom feed
From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
To: jjohnson@kernel.org
Cc: ath11k@lists.infradead.org, ath12k@lists.infradead.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Subject: [PATCH v4 2/4] wifi: ath11k/ath12k: remove skb parameter from get_ring_selector
Date: Fri, 24 Jul 2026 07:31:19 +0200	[thread overview]
Message-ID: <20260724053121.15759-3-jtornosm@redhat.com> (raw)
In-Reply-To: <20260724053121.15759-1-jtornosm@redhat.com>

Change the get_ring_selector hw_ops callback signature from
get_ring_selector(struct sk_buff *skb) to get_ring_selector(u8 ac),
removing the dependency on the skb.

After the previous patch switched WCN6750 from skb_get_hash() to
skb_get_queue_mapping(), all get_ring_selector implementations fall
into two categories:
 - smp_processor_id(): ignores the skb entirely
 - skb_get_queue_mapping(): only reads the AC value from the skb

Since the AC is the only information extracted from the skb, pass it
directly as a u8 parameter instead. Callers in the dp_tx path now
pass skb_get_queue_mapping(skb), which preserves the exact same
behavior.

This change enables a subsequent patch to call get_ring_selector()
from wake_tx_queue using txq->ac, without needing access to the skb.
mac80211 guarantees that skb_get_queue_mapping(skb) == txq->ac
for any skb dequeued from a given txq, since both values are
derived from the same skb->priority through the same AC mapping.

No functional change.

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
v4: new patch

 drivers/net/wireless/ath/ath11k/dp_tx.c       |  2 +-
 drivers/net/wireless/ath/ath11k/hw.c          | 16 ++++------------
 drivers/net/wireless/ath/ath11k/hw.h          |  2 +-
 drivers/net/wireless/ath/ath12k/hw.h          |  2 +-
 drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c |  2 +-
 drivers/net/wireless/ath/ath12k/wifi7/hw.c    |  6 +++---
 6 files changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index cac970c92806..083aca8ff355 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -108,7 +108,7 @@ int ath11k_dp_tx(struct ath11k *ar, struct ath11k_vif *arvif,
 
 	pool_id = skb_get_queue_mapping(skb) & (ATH11K_HW_MAX_QUEUES - 1);
 
-	ring_selector = ab->hw_params.hw_ops->get_ring_selector(skb);
+	ring_selector = ab->hw_params.hw_ops->get_ring_selector(skb_get_queue_mapping(skb));
 
 tcl_ring_sel:
 	tcl_ring_retry = false;
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index d679e39dce03..8a28c1d4c17b 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -876,22 +876,14 @@ static bool ath11k_hw_wcn6855_rx_desc_get_ldpc_support(struct hal_rx_desc *desc)
 			 __le32_to_cpu(desc->u.wcn6855.msdu_start.info2));
 }
 
-static u32 ath11k_hw_ipq8074_get_tcl_ring_selector(struct sk_buff *skb)
-{
-	/* Let the default ring selection be based on current processor
-	 * number, where one of the 3 tcl rings are selected based on
-	 * the smp_processor_id(). In case that ring
-	 * is full/busy, we resort to other available rings.
-	 * If all rings are full, we drop the packet.
-	 *
-	 * TODO: Add throttling logic when all rings are full
-	 */
+static u32 ath11k_hw_ipq8074_get_tcl_ring_selector(u8 ac)
+{
 	return smp_processor_id();
 }
 
-static u32 ath11k_hw_wcn6750_get_tcl_ring_selector(struct sk_buff *skb)
+static u32 ath11k_hw_wcn6750_get_tcl_ring_selector(u8 ac)
 {
-	return skb_get_queue_mapping(skb);
+	return ac;
 }
 
 const struct ath11k_hw_ops ipq8074_ops = {
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 4996536fbd14..b6bc8b72d812 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -273,7 +273,7 @@ struct ath11k_hw_ops {
 	u16 (*mpdu_info_get_peerid)(struct hal_rx_mpdu_info *mpdu_info);
 	bool (*rx_desc_mac_addr2_valid)(struct hal_rx_desc *desc);
 	u8* (*rx_desc_mpdu_start_addr2)(struct hal_rx_desc *desc);
-	u32 (*get_ring_selector)(struct sk_buff *skb);
+	u32 (*get_ring_selector)(u8 ac);
 };
 
 extern const struct ath11k_hw_ops ipq8074_ops;
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index 86fb8b719613..65caa7a2349f 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -243,7 +243,7 @@ struct ath12k_hw_ops {
 	int (*mac_id_to_pdev_id)(const struct ath12k_hw_params *hw, int mac_id);
 	int (*mac_id_to_srng_id)(const struct ath12k_hw_params *hw, int mac_id);
 	int (*rxdma_ring_sel_config)(struct ath12k_base *ab);
-	u8 (*get_ring_selector)(struct sk_buff *skb);
+	u8 (*get_ring_selector)(u8 ac);
 	bool (*dp_srng_is_tx_comp_ring)(int ring_num);
 	bool (*is_frame_link_agnostic)(struct ath12k_link_vif *arvif,
 				       struct ieee80211_mgmt *mgmt);
diff --git a/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c b/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
index d2749de44553..74359e8eea47 100644
--- a/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
@@ -111,7 +111,7 @@ int ath12k_wifi7_dp_tx(struct ath12k_pdev_dp *dp_pdev, struct ath12k_link_vif *a
 	 * If all rings are full, we drop the packet.
 	 * TODO: Add throttling logic when all rings are full
 	 */
-	ring_selector = dp->hw_params->hw_ops->get_ring_selector(skb);
+	ring_selector = dp->hw_params->hw_ops->get_ring_selector(skb_get_queue_mapping(skb));
 
 tcl_ring_sel:
 	tcl_ring_retry = false;
diff --git a/drivers/net/wireless/ath/ath12k/wifi7/hw.c b/drivers/net/wireless/ath/ath12k/wifi7/hw.c
index d9fdd2fc8298..7436cf70925a 100644
--- a/drivers/net/wireless/ath/ath12k/wifi7/hw.c
+++ b/drivers/net/wireless/ath/ath12k/wifi7/hw.c
@@ -49,7 +49,7 @@ ath12k_wifi7_hw_mac_id_to_srng_id_qcn9274(const struct ath12k_hw_params *hw,
 	return 0;
 }
 
-static u8 ath12k_wifi7_hw_get_ring_selector_qcn9274(struct sk_buff *skb)
+static u8 ath12k_wifi7_hw_get_ring_selector_qcn9274(u8 ac)
 {
 	return smp_processor_id();
 }
@@ -83,9 +83,9 @@ ath12k_wifi7_hw_mac_id_to_srng_id_wcn7850(const struct ath12k_hw_params *hw,
 	return mac_id;
 }
 
-static u8 ath12k_wifi7_hw_get_ring_selector_wcn7850(struct sk_buff *skb)
+static u8 ath12k_wifi7_hw_get_ring_selector_wcn7850(u8 ac)
 {
-	return skb_get_queue_mapping(skb);
+	return ac;
 }
 
 static bool ath12k_wifi7_dp_srng_is_comp_ring_wcn7850(int ring_num)
-- 
2.54.0


  parent reply	other threads:[~2026-07-24  5:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-24  5:31 [PATCH v4 0/4] ath11k/ath12k: implement TX flow control Jose Ignacio Tornos Martinez
2026-07-24  5:31 ` [PATCH v4 1/4] wifi: ath11k: use queue mapping for WCN6750 ring selection Jose Ignacio Tornos Martinez
2026-07-24  5:31 ` Jose Ignacio Tornos Martinez [this message]
2026-07-24  5:31 ` [PATCH v4 3/4] wifi: ath11k: implement custom wake_tx_queue with flow control Jose Ignacio Tornos Martinez
2026-07-24  5:31 ` [PATCH v4 4/4] wifi: ath12k: " Jose Ignacio Tornos Martinez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260724053121.15759-3-jtornosm@redhat.com \
    --to=jtornosm@redhat.com \
    --cc=ath11k@lists.infradead.org \
    --cc=ath12k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox