[PATCH] wifi: rtlwifi: rtl8192cu: Remove logically dead code in rtl92cu_update_hal_rate_table

[Chelsy Ratnawat <chelsyratnawat2001@gmail.com>]

The variable 'mimo_ps' is initialized to IEEE80211_SMPS_OFF and never
modified throughout the function. This makes the condition checking for
IEEE80211_SMPS_STATIC always evaluate to false, rendering the entire
if-branch unreachable dead code.

This error was reported by Coverity Scan.

Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
---
 .../wireless/realtek/rtlwifi/rtl8192cu/hw.c   | 20 +++++++------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index e75f7ec44e6a..199bab58363c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -1809,10 +1809,9 @@ static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	u32 ratr_value;
+	u32 ratr_value, ratr_mask;
 	u8 ratr_index = 0;
 	u8 nmode = mac->ht_enable;
-	u8 mimo_ps = IEEE80211_SMPS_OFF;
 	u16 shortgi_rate;
 	u32 tmp_ratr_value;
 	u8 curtxbw_40mhz = mac->bw_40;
@@ -1844,19 +1843,14 @@ static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
 	case WIRELESS_MODE_N_24G:
 	case WIRELESS_MODE_N_5G:
 		nmode = 1;
-		if (mimo_ps == IEEE80211_SMPS_STATIC) {
-			ratr_value &= 0x0007F005;
-		} else {
-			u32 ratr_mask;
 
-			if (get_rf_type(rtlphy) == RF_1T2R ||
-			    get_rf_type(rtlphy) == RF_1T1R)
-				ratr_mask = 0x000ff005;
-			else
-				ratr_mask = 0x0f0ff005;
+		if (get_rf_type(rtlphy) == RF_1T2R ||
+		    get_rf_type(rtlphy) == RF_1T1R)
+			ratr_mask = 0x000ff005;
+		else
+			ratr_mask = 0x0f0ff005;
 
-			ratr_value &= ratr_mask;
-		}
+		ratr_value &= ratr_mask;
 		break;
 	default:
 		if (rtlphy->rf_type == RF_1T2R)
-- 
2.53.0