From: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com>
To: ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com>,
Pardeep Kaur <pardeep.kaur@oss.qualcomm.com>
Subject: [PATCH ath-next v2 6/8] wifi: ath12k: track per-ring RX sent-to-stack count
Date: Thu, 6 Aug 2026 18:54:25 +0530 [thread overview]
Message-ID: <20260806132427.3704828-7-pardeep.kaur@oss.qualcomm.com> (raw)
In-Reply-To: <20260806132427.3704828-1-pardeep.kaur@oss.qualcomm.com>
From: Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com>
The device DP stats provide visibility into RX errors and drops but
lack a counter for successfully delivered packets. Without this, it is
difficult to correlate REO ring activity with actual stack delivery
during debugging or performance analysis.
Add sent_to_stack[DP_REO_DST_RING_MAX][ATH12K_MAX_DEVICES] to
ath12k_device_dp_stats to track successful deliveries per REO ring per
device. The counter is attributed to the ring owner's dp and indexed by
partner_dp->device_id, keeping it in the same debugfs file as reo_rx[]
for direct comparison in MLO configurations.
Increment the counter just before each MSDU is handed off to the stack
via ath12k_dp_rx_deliver_msdu(). Add a likely()/WARN_ON_ONCE() bounds
check on ring_id before indexing sent_to_stack[], consistent with all
other new stat arrays in this series.
Expose the per-ring per-device counts in the device_dp_stats debugfs
file under a new 'REO sent to stack' section.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com>
Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com>
Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com>
---
drivers/net/wireless/ath/ath12k/debugfs.c | 10 ++++++++++
drivers/net/wireless/ath/ath12k/dp.h | 1 +
drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c | 5 ++++-
3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/debugfs.c b/drivers/net/wireless/ath/ath12k/debugfs.c
index f9653fb7b038..216a1af22898 100644
--- a/drivers/net/wireless/ath/ath12k/debugfs.c
+++ b/drivers/net/wireless/ath/ath12k/debugfs.c
@@ -1122,6 +1122,16 @@ static ssize_t ath12k_debugfs_dump_device_dp_stats(struct file *file,
len += scnprintf(buf + len, size - len, "%s: %u\n",
wbm_rx_drop[i], device_stats->wbm_err.drop[i]);
+ len += scnprintf(buf + len, size - len, "\nREO sent to stack\n");
+ for (i = 0; i < DP_REO_DST_RING_MAX; i++) {
+ len += scnprintf(buf + len, size - len, "ring%d:", i);
+ for (j = 0; j < ab->ag->num_devices; j++)
+ len += scnprintf(buf + len, size - len,
+ "\t%d:%u", j,
+ device_stats->sent_to_stack[i][j]);
+ len += scnprintf(buf + len, size - len, "\n");
+ }
+
len += scnprintf(buf + len, size - len, "\nHAL REO errors:\n");
for (i = 0; i < DP_REO_DST_RING_MAX; i++)
diff --git a/drivers/net/wireless/ath/ath12k/dp.h b/drivers/net/wireless/ath/ath12k/dp.h
index 9b57b2170b60..5cfe2096c633 100644
--- a/drivers/net/wireless/ath/ath12k/dp.h
+++ b/drivers/net/wireless/ath/ath12k/dp.h
@@ -458,6 +458,7 @@ struct ath12k_device_dp_stats {
u32 tx_enqueued[DP_TCL_NUM_RING_MAX];
u32 tx_completed[DP_TCL_NUM_RING_MAX];
u32 reo_excep_msdu_buf_type;
+ u32 sent_to_stack[DP_REO_DST_RING_MAX][ATH12K_MAX_DEVICES];
};
struct ath12k_dp {
diff --git a/drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c b/drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c
index b203513d63cc..60489cfd4e54 100644
--- a/drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c
@@ -651,7 +651,10 @@ ath12k_wifi7_dp_rx_process_received_packets(struct ath12k_dp *dp,
dev_kfree_skb_any(msdu);
continue;
}
-
+ if (likely(ring_id < DP_REO_DST_RING_MAX))
+ dp->device_stats.sent_to_stack[ring_id][partner_dp->device_id]++;
+ else
+ WARN_ON_ONCE(1);
ath12k_dp_rx_deliver_msdu(dp_pdev, napi, msdu, &rx_info);
}
--
2.34.1
next prev parent reply other threads:[~2026-08-06 13:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 13:24 [PATCH ath-next v2 0/8] wifi: ath12k: extend device DP stats for TX and RX observability Pardeep Kaur
2026-08-06 13:24 ` [PATCH ath-next v2 1/8] wifi: ath12k: fix out-of-bounds access on TX stats arrays Pardeep Kaur
2026-08-07 2:07 ` Jeff Johnson
2026-08-06 13:24 ` [PATCH ath-next v2 2/8] wifi: ath12k: rename wbm_status to htt_status in HTT TX completion Pardeep Kaur
2026-08-06 13:24 ` [PATCH ath-next v2 3/8] wifi: ath12k: add TCL ring TX buffer allocation failure counter Pardeep Kaur
2026-08-06 13:24 ` [PATCH ath-next v2 4/8] wifi: ath12k: add device DP stats reset support via debugfs Pardeep Kaur
2026-08-07 2:14 ` Jeff Johnson
2026-08-06 13:24 ` [PATCH ath-next v2 5/8] wifi: ath12k: add WBM RX error drop statistics Pardeep Kaur
2026-08-06 13:24 ` Pardeep Kaur [this message]
2026-08-06 13:24 ` [PATCH ath-next v2 7/8] wifi: ath12k: fix 1-based ring index in REO Rx Received debugfs output Pardeep Kaur
2026-08-06 13:24 ` [PATCH ath-next v2 8/8] wifi: ath12k: add WBM SW desc fallback counter Pardeep Kaur
2026-08-06 14:40 ` [PATCH ath-next v2 0/8] wifi: ath12k: extend device DP stats for TX and RX observability Jeff Johnson
-- strict thread matches above, loose matches on Subject: below --
2026-08-06 12:09 Pardeep Kaur
2026-08-06 12:09 ` [PATCH ath-next v2 6/8] wifi: ath12k: track per-ring RX sent-to-stack count Pardeep Kaur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260806132427.3704828-7-pardeep.kaur@oss.qualcomm.com \
--to=pardeep.kaur@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=hariharan.ramanathan@oss.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox