Linux wireless drivers development
 help / color / mirror / Atom feed
From: Mouri <mourimcbusiness@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: miriam.rachel.korenblit@intel.com, johannes.berg@intel.com,
	Mouri <mourimcbusiness@gmail.com>
Subject: [PATCH] wifi: iwlwifi: fix spelling mistakes
Date: Fri, 14 Aug 2026 09:02:46 -0400	[thread overview]
Message-ID: <20260814130246.25259-1-mourimcbusiness@gmail.com> (raw)

Fix several spelling mistakes in the iwlwifi driver documentation
and comments.

Signed-off-by: Mouri <mourimcbusiness@gmail.com>
---
 drivers/net/wireless/intel/iwlwifi/fw/error-dump.h | 2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  | 6 +++---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c      | 2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h       | 4 ++--
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c        | 6 +++---
 drivers/net/wireless/intel/iwlwifi/mvm/utils.c     | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/error-dump.h b/drivers/net/wireless/intel/iwlwifi/fw/error-dump.h
index 07f1240df866..692bb17dfc33 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/error-dump.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/error-dump.h
@@ -352,7 +352,7 @@ struct iwl_fw_ini_error_dump_register {
  * struct iwl_fw_ini_dump_cfg_name - configuration name
  * @image_type: image type the configuration is related to
  * @cfg_name_len: length of the configuration name
- * @cfg_name: name of the configuraiton
+ * @cfg_name: name of the configuration
  */
 struct iwl_fw_ini_dump_cfg_name {
 	__le32 image_type;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 3e73a6195fd9..88bdff486bd4 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2302,7 +2302,7 @@ int iwl_mvm_set_sta_pkt_ext(struct iwl_mvm *mvm,
 			iwl_mvm_parse_ppe(mvm, pkt_ext, nss, ru_index_bitmap,
 					  ppe, ppe_pos_bit, true);
 		/* EHT PPE Thresholds doesn't exist - set the API according to
-		 * HE PPE Tresholds
+		 * HE PPE Thresholds
 		 */
 		} else if (link_sta->he_cap.he_cap_elem.phy_cap_info[6] &
 			   IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
@@ -2364,7 +2364,7 @@ int iwl_mvm_set_sta_pkt_ext(struct iwl_mvm *mvm,
 }
 
 /*
- * This function sets the MU EDCA parameters ans returns whether MU EDCA
+ * This function sets the MU EDCA parameters and returns whether MU EDCA
  * is enabled or not
  */
 bool iwl_mvm_set_fw_mu_edca_params(struct iwl_mvm *mvm,
@@ -3617,7 +3617,7 @@ static void iwl_mvm_mei_host_associated(struct iwl_mvm *mvm,
 		break;
 	default:
 		/* auth method / AKM not supported */
-		/* TODO: All the FT vesions of these? */
+		/* TODO: All the FT versions of these? */
 		return;
 	}
 
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 3831b3c27e0f..d0ea18c5f03b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -2226,7 +2226,7 @@ static u16 iwl_mvm_scan_umac_flags(struct iwl_mvm *mvm,
 
 	/*
 	 * Extended dwell is relevant only for low band to start with, as it is
-	 * being used for social channles only (1, 6, 11), so we can check
+	 * being used for social channels only (1, 6, 11), so we can check
 	 * only scan type on low band also for CDB.
 	 */
 	if (iwl_mvm_is_regular_scan(params) &&
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
index ff099aec7886..1cc0f703d675 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -75,7 +75,7 @@ struct iwl_mvm_vif;
 /**
  * DOC: station table - introduction
  *
- * The station table is a list of data structure that reprensent the stations.
+ * The station table is a list of data structure that represent the stations.
  * In STA/P2P client mode, the driver will hold one station for the AP/ GO.
  * In GO/AP mode, the driver will have as many stations as associated clients.
  * All these stations are reflected in the fw's station table. The driver
@@ -292,7 +292,7 @@ enum iwl_mvm_rxq_notif_type {
 /**
  * struct iwl_mvm_internal_rxq_notif - Internal representation of the data sent
  * in &iwl_rxq_sync_cmd. Should be DWORD aligned.
- * FW is agnostic to the payload, so there are no endianity requirements.
+ * FW is agnostic to the payload, so there are no endianness requirements.
  *
  * @type: value from &iwl_mvm_rxq_notif_type
  * @sync: ctrl path is waiting for all notifications to be received
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index d3c2fe830477..2beea10302ab 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -530,7 +530,7 @@ static bool iwl_mvm_use_host_rate(struct iwl_mvm *mvm,
 	 * Not a data frame, use host rate if on an old device that
 	 * can't possibly be doing MLO (firmware may be selecting a
 	 * bad rate), if we might be doing MLO we need to let FW pick
-	 * (since we don't necesarily know the link), but FW rate
+	 * (since we don't necessarily know the link), but FW rate
 	 * selection was fixed.
 	 */
 	return mvm->trans->mac_cfg->device_family < IWL_DEVICE_FAMILY_BZ;
@@ -914,7 +914,7 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
 
 	/*
 	 * Do not build AMSDU for IPv6 with extension headers.
-	 * ask stack to segment and checkum the generated MPDUs for us.
+	 * ask stack to segment and checksum the generated MPDUs for us.
 	 */
 	if (skb->protocol == htons(ETH_P_IPV6) &&
 	    ((struct ipv6hdr *)skb_network_header(skb))->nexthdr !=
@@ -1664,7 +1664,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
 			 * its sequence control is 0. Note that for that same
 			 * reason, NDPs are never sent to A-MPDU'able queues
 			 * so that we can never have more than one freed frame
-			 * for a single Tx resonse (see WARN_ON below).
+			 * for a single Tx response (see WARN_ON below).
 			 */
 			if (ieee80211_is_qos_nullfunc(hdr->frame_control))
 				is_ndp = true;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
index 2e12f93ad32b..9398c9e3193a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -135,7 +135,7 @@ int iwl_mvm_send_cmd_status(struct iwl_mvm *mvm, struct iwl_host_cmd *cmd,
 }
 
 /*
- * We assume that the caller set the status to the sucess value
+ * We assume that the caller set the status to the success value
  */
 int iwl_mvm_send_cmd_pdu_status(struct iwl_mvm *mvm, u32 id, u16 len,
 				const void *data, u32 *status)
@@ -284,7 +284,7 @@ int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq)
  * @smps_request: The request to change the SMPS mode.
  * @link_id: for MLO link_id, otherwise 0 (deflink)
  *
- * Get a requst to change the SMPS mode,
+ * Get a request to change the SMPS mode,
  * and change it according to all other requests in the driver.
  */
 void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-- 
2.43.0


                 reply	other threads:[~2026-08-14 13:04 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814130246.25259-1-mourimcbusiness@gmail.com \
    --to=mourimcbusiness@gmail.com \
    --cc=johannes.berg@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=miriam.rachel.korenblit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox