From: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
To: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Johannes Berg <johannes@sipsolutions.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org,
Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
Subject: [PATCH wireless-next 05/18] wifi: cfg80211/mac80211: Parse SMD parameters in STA addition/modification
Date: Tue, 08 Sep 2026 01:59:14 +0530 [thread overview]
Message-ID: <20260908-smd-v1-5-65ad4ab30fbd@oss.qualcomm.com> (raw)
In-Reply-To: <20260908-smd-v1-0-65ad4ab30fbd@oss.qualcomm.com>
From: Aditya Sathish <asathish@qti.qualcomm.com>
When a non-AP MLD is getting added or having its capabilities updated,
handle the SMD parameters passed from userspace. Otherwise, drivers will
not be able to identify that the non-AP MLD has negotiated SMD with this
AP MLD during association nor can they support SMD BSS Transition if it
has been requested later by the non-AP MLD.
Signed-off-by: Aditya Sathish <asathish@qti.qualcomm.com>
Co-developed-by: Sidhanta Sahu <sidhanta.sahu@oss.qualcomm.com>
Signed-off-by: Sidhanta Sahu <sidhanta.sahu@oss.qualcomm.com>
Co-developed-by: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
Signed-off-by: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
---
include/net/cfg80211.h | 15 +++++++++++++
include/net/mac80211.h | 3 +++
include/uapi/linux/nl80211.h | 17 ++++++++++++++
net/mac80211/cfg.c | 10 +++++++++
net/mac80211/debugfs_sta.c | 1 +
net/mac80211/sta_info.h | 2 ++
net/wireless/nl80211.c | 53 ++++++++++++++++++++++++++++++++++++++------
7 files changed, 94 insertions(+), 7 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d0a269f4c711..bf33cf5366ef 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1897,6 +1897,19 @@ struct cfg80211_ttlm_params {
u16 ulink[8];
};
+/**
+ * struct cfg80211_sta_smd_params - SMD parameters for an added station
+ *
+ * @smd_sta: SMD-negotiated STA
+ * @smd_identifier: SMD Identifier
+ * @dl_data_fwd: MSDU forwarding supported
+ */
+struct cfg80211_sta_smd_params {
+ bool smd_sta;
+ u8 smd_identifier[ETH_ALEN];
+ bool dl_data_fwd;
+};
+
/**
* struct station_parameters - station parameters
*
@@ -1937,6 +1950,7 @@ struct cfg80211_ttlm_params {
* @link_sta_params: link related params.
* @epp_peer: EPP peer indication
* @nmi_mac: MAC address of the NMI station of the NAN peer
+ * @smd_params: SMD params for this station
*/
struct station_parameters {
struct net_device *vlan;
@@ -1965,6 +1979,7 @@ struct station_parameters {
struct link_station_parameters link_sta_params;
bool epp_peer;
const u8 *nmi_mac;
+ struct cfg80211_sta_smd_params smd_params;
};
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 6b82ca07fbf0..d8f5e5d8a021 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2727,6 +2727,7 @@ struct ieee80211_link_sta {
* @nan_sched: NAN peer schedule for this station. Valid only for NMI stations.
* @ext_mld_capa_ops: the MLD's extended MLD capabilities and operations
* NOTE: currently only tracked for AP STAs
+ * @smd_params: SMD parameters of the STA
*/
struct ieee80211_sta {
u8 addr[ETH_ALEN] __aligned(2);
@@ -2761,6 +2762,8 @@ struct ieee80211_sta {
/* should only be accessed with the wiphy mutex held */
struct ieee80211_nan_peer_sched *nan_sched;
+ struct cfg80211_sta_smd_params smd_params;
+
/* must be last */
u8 drv_priv[] __aligned(sizeof(void *));
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f5c8dbe5f26a..f1d8db31f17e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3191,6 +3191,17 @@ enum nl80211_commands {
* %NL80211_EXT_FEATURE_SMD.
* Used with %NL80211_CMD_START_AP. See &enum nl80211_smd_params_attrs.
*
+ * @NL80211_ATTR_PEER_SMD_ENABLED: Flag indicating a peer STA has SMD enabled.
+ * Used with %NL80211_CMD_NEW_STATION.
+ *
+ * @NL80211_ATTR_PEER_SMD_MAC_ADDR: Binary attribute with the 6-byte MAC
+ * address of the SMD-capable peer STA.
+ * Used with %NL80211_CMD_NEW_STATION.
+ *
+ * @NL80211_ATTR_PEER_SMD_DL_DATA_FORWARDING: Flag indicating the peer STA
+ * supports DL data forwarding within the SMD domain.
+ * Used with %NL80211_CMD_NEW_STATION.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3793,6 +3804,10 @@ enum nl80211_attrs {
NL80211_ATTR_SMD_PARAMS,
+ NL80211_ATTR_PEER_SMD_ENABLED,
+ NL80211_ATTR_PEER_SMD_MAC_ADDR,
+ NL80211_ATTR_PEER_SMD_DL_DATA_FORWARDING,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3942,6 +3957,7 @@ enum nl80211_iftype {
* that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
* previously added station into associated state
* @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
+ * @NL80211_STA_FLAG_SMD: station has negotiated SMD.
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -3955,6 +3971,7 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_TDLS_PEER,
NL80211_STA_FLAG_ASSOCIATED,
NL80211_STA_FLAG_SPP_AMSDU,
+ NL80211_STA_FLAG_SMD,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b4b42790c5d7..138b67f4bda4 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2528,6 +2528,16 @@ static int sta_apply_parameters(struct ieee80211_local *local,
if (mask & BIT(NL80211_STA_FLAG_SPP_AMSDU))
sta->sta.spp_amsdu = set & BIT(NL80211_STA_FLAG_SPP_AMSDU);
+ if (mask & BIT(NL80211_STA_FLAG_SMD)) {
+ if (set & BIT(NL80211_STA_FLAG_SMD))
+ set_sta_flag(sta, WLAN_STA_SMD);
+ else if (test_sta_flag(sta, WLAN_STA_SMD))
+ clear_sta_flag(sta, WLAN_STA_SMD);
+ }
+
+ if (params->smd_params.smd_sta)
+ sta->sta.smd_params = params->smd_params;
+
/* mark TDLS channel switch support, if the AP allows it */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
!sdata->deflink.u.mgd.tdls_chan_switch_prohibited &&
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index ef75255d47d5..d7e7c9c578e4 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -78,6 +78,7 @@ static const char * const sta_flag_names[] = {
FLAG(PS_DELIVER),
FLAG(USES_ENCRYPTION),
FLAG(DECAP_OFFLOAD),
+ FLAG(SMD),
#undef FLAG
};
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index ee0d32877c5b..506aeb241a6d 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -72,6 +72,7 @@
* @WLAN_STA_USES_ENCRYPTION: This station was configured for encryption,
* so drop all packets without a key later.
* @WLAN_STA_DECAP_OFFLOAD: This station uses rx decap offload
+ * @WLAN_STA_SMD: this station is associated to an SMD-ME.
*
* @NUM_WLAN_STA_FLAGS: number of defined flags
*/
@@ -104,6 +105,7 @@ enum ieee80211_sta_info_flags {
WLAN_STA_PS_DELIVER,
WLAN_STA_USES_ENCRYPTION,
WLAN_STA_DECAP_OFFLOAD,
+ WLAN_STA_SMD,
NUM_WLAN_STA_FLAGS,
};
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index aa7aa70a5b41..0d20c2ab3d5e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1114,6 +1114,9 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_STA_DUMP_LINK_STATS] = { .type = NLA_FLAG },
[NL80211_ATTR_SMD_PARAMS] =
NLA_POLICY_NESTED(nl80211_smd_params_policy),
+ [NL80211_ATTR_PEER_SMD_ENABLED] = { .type = NLA_FLAG },
+ [NL80211_ATTR_PEER_SMD_MAC_ADDR] = NLA_POLICY_ETH_ADDR,
+ [NL80211_ATTR_PEER_SMD_DL_DATA_FORWARDING] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -7702,6 +7705,7 @@ static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_AUTHENTICATED] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_TDLS_PEER] = { .type = NLA_FLAG },
+ [NL80211_STA_FLAG_SMD] = { .type = NLA_FLAG },
};
static int parse_station_flags(struct genl_info *info,
@@ -7768,11 +7772,13 @@ static int parse_station_flags(struct genl_info *info,
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
+ params->sta_flags_mask = BIT(NL80211_STA_FLAG_SMD);
+ fallthrough;
case NL80211_IFTYPE_P2P_GO:
- params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHORIZED) |
- BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
- BIT(NL80211_STA_FLAG_WME) |
- BIT(NL80211_STA_FLAG_MFP);
+ params->sta_flags_mask |= BIT(NL80211_STA_FLAG_AUTHORIZED) |
+ BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
+ BIT(NL80211_STA_FLAG_WME) |
+ BIT(NL80211_STA_FLAG_MFP);
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
@@ -8913,7 +8919,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
return -EINVAL;
/* When you run into this, adjust the code below for the new flag */
- BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 8);
+ BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 9);
switch (statype) {
case CFG80211_STA_MESH_PEER_KERNEL:
@@ -9007,7 +9013,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
BIT(NL80211_STA_FLAG_WME) |
BIT(NL80211_STA_FLAG_MFP) |
- BIT(NL80211_STA_FLAG_SPP_AMSDU)))
+ BIT(NL80211_STA_FLAG_SPP_AMSDU) |
+ BIT(NL80211_STA_FLAG_SMD)))
return -EINVAL;
/* but authenticated/associated only if driver handles it */
@@ -9261,6 +9268,30 @@ static int nl80211_parse_sta_txpower_setting(struct genl_info *info,
return 0;
}
+static int nl80211_set_station_smd(struct genl_info *info,
+ struct station_parameters *params)
+{
+ struct nlattr *smd_mac;
+
+ params->smd_params.smd_sta =
+ !!info->attrs[NL80211_ATTR_PEER_SMD_ENABLED];
+
+ if (!params->smd_params.smd_sta)
+ return 0;
+
+ smd_mac = info->attrs[NL80211_ATTR_PEER_SMD_MAC_ADDR];
+
+ if (!info->attrs[NL80211_ATTR_MLD_ADDR] || !smd_mac)
+ return -EINVAL;
+
+ nla_memcpy(params->smd_params.smd_identifier, smd_mac, ETH_ALEN);
+
+ params->smd_params.dl_data_fwd =
+ !!info->attrs[NL80211_ATTR_PEER_SMD_DL_DATA_FORWARDING];
+
+ return 0;
+}
+
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -9399,6 +9430,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
+ err = nl80211_set_station_smd(info, ¶ms);
+ if (err)
+ return err;
+
/* Include parameters for TDLS peer (will check later) */
err = nl80211_set_station_tdls(info, ¶ms);
if (err)
@@ -9627,6 +9662,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
if (parse_station_flags(info, wdev->iftype, ¶ms))
return -EINVAL;
+ err = nl80211_set_station_smd(info, ¶ms);
+ if (err)
+ return err;
+
/* HT/VHT requires QoS, but if we don't have that just ignore HT/VHT
* as userspace might just pass through the capabilities from the IEs
* directly, rather than enforcing this restriction and returning an
@@ -9660,7 +9699,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
/* When you run into this, adjust the code below for the new flag */
- BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 8);
+ BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 9);
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
--
2.34.1
next prev parent reply other threads:[~2026-09-07 20:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 20:29 [PATCH wireless-next 00/18] wifi: Add Seamless Mobility Domain (SMD) AP support Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 01/18] net: skbuff: Add SKB extension support to wireless drivers Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 02/18] wifi: nl80211: Define Seamless Mobility Domain (SMD) device capability Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 03/18] wifi: nl80211: Add kernel interfaces for Seamless Mobility Domain setup Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 04/18] wifi: cfg80211/mac80211: Configure AP with SMD capabilities Pooventhiran G
2026-09-07 20:29 ` Pooventhiran G [this message]
2026-09-07 20:29 ` [PATCH wireless-next 06/18] wifi: nl80211/cfg80211: Indicate STA creation via SMD BSS Transition Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 07/18] wifi: nl80211/mac80211: Add SMD BSS Transition sub-state STA flags Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 08/18] wifi: mac80211: Add driver_op for SMD substate changes Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 09/18] wifi: mac80211: Send BlockAck policy in AMPDU action Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 10/18] wifi: mac80211: Define SMD BSS Transition context for transport Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 11/18] wifi: mac80211: Enable skb extensions along with mac80211 Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 12/18] wifi: nl80211: Define attributes to pack SMD BSS Transition context Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 13/18] wifi: cfg80211/mac80211: Handle UHR Link Reconfiguration frame Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 14/18] wifi: nl80211: Pack SMD dynamic context along with frame Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 15/18] wifi: nl80211/cfg80211: Add support for SMD context programming Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 16/18] wifi: mac80211: Add mac80211 support to handle NL80211_CMD_SET_SMD_CTX Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 17/18] wifi: nl80211/cfg80211: Add support for querying SMD context for target AP MLD Pooventhiran G
2026-09-07 20:29 ` [PATCH wireless-next 18/18] wifi: mac80211: Add mac80211 support to handle NL80211_CMD_GET_SMD_CTX Pooventhiran G
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908-smd-v1-5-65ad4ab30fbd@oss.qualcomm.com \
--to=pooventhiran.g@oss.qualcomm.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox