[RFC PATCH wireless-next 03/17] wifi: brcmsmac: look up OFDM rates in rate.c

[Ragul Balaji <ragulbaby@gmail.com>]

Move the OFDM rate table next to its only user, ofdm_phy2mac_rate(),
which leaves rate.c independent of the PHY code. No functional change.

Signed-off-by: Ragul Balaji <ragulbaby@gmail.com>
Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
 .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c | 17 -----------------
 .../broadcom/brcm80211/brcmsmac/phy/phy_hal.h |  2 --
 .../broadcom/brcm80211/brcmsmac/rate.c        | 19 +++++++++++++++++++
 .../broadcom/brcm80211/brcmsmac/rate.h        |  7 -------
 4 files changed, 19 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
index 7eae73ef7..d519e950c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -101,18 +101,6 @@ static const struct chan_info_basic chan_info_all[] = {
 	{216, 5080}
 };
 
-static const u8 ofdm_rate_lookup[] = {
-
-	BRCM_RATE_48M,
-	BRCM_RATE_24M,
-	BRCM_RATE_12M,
-	BRCM_RATE_6M,
-	BRCM_RATE_54M,
-	BRCM_RATE_36M,
-	BRCM_RATE_18M,
-	BRCM_RATE_9M
-};
-
 #define PHY_WREG_LIMIT  24
 
 void wlc_phyreg_enter(struct brcms_phy_pub *pih)
@@ -2486,11 +2474,6 @@ u8 wlc_phy_stf_chain_active_get(struct brcms_phy_pub *pih)
 	return active_bitmap;
 }
 
-const u8 *wlc_phy_get_ofdm_rate_lookup(void)
-{
-	return ofdm_rate_lookup;
-}
-
 void wlc_phy_ldpc_override_set(struct brcms_phy_pub *ppi, bool ldpc)
 {
 	return;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_hal.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_hal.h
index 7ffff7f51..c5aaaec43 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_hal.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_hal.h
@@ -234,8 +234,6 @@ void wlc_phy_ofdm_rateset_war(struct brcms_phy_pub *pih, bool war);
 void wlc_phy_bf_preempt_enable(struct brcms_phy_pub *pih, bool bf_preempt);
 void wlc_phy_machwcap_set(struct brcms_phy_pub *ppi, u32 machwcap);
 
-const u8 *wlc_phy_get_ofdm_rate_lookup(void);
-
 s8 wlc_phy_get_tx_power_offset_by_mcs(struct brcms_phy_pub *ppi,
 				      u8 mcs_offset);
 s8 wlc_phy_get_tx_power_offset(struct brcms_phy_pub *ppi, u8 tbl_offset);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.c
index 6841bc005..ac577c8e8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.c
@@ -266,6 +266,25 @@ const struct brcms_c_rateset cck_rates = {
 	  0x00, 0x00, 0x00, 0x00, 0x00}
 };
 
+static const u8 ofdm_rate_lookup[] = {
+
+	BRCM_RATE_48M,
+	BRCM_RATE_24M,
+	BRCM_RATE_12M,
+	BRCM_RATE_6M,
+	BRCM_RATE_54M,
+	BRCM_RATE_36M,
+	BRCM_RATE_18M,
+	BRCM_RATE_9M
+};
+
+/* Convert encoded rate value in plcp header to numerical rates in 500 KHz
+ * increments */
+static inline u8 ofdm_phy2mac_rate(u8 rlpt)
+{
+	return ofdm_rate_lookup[rlpt & 0x7];
+}
+
 /* check if rateset is valid.
  * if check_brate is true, rateset without a basic rate is considered NOT valid.
  */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.h
index e178b1a0e..7c1d43323 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/rate.h
@@ -198,13 +198,6 @@ static inline u8 cck_rspec(u8 cck)
 	return cck & RSPEC_RATE_MASK;
 }
 
-/* Convert encoded rate value in plcp header to numerical rates in 500 KHz
- * increments */
-static inline u8 ofdm_phy2mac_rate(u8 rlpt)
-{
-	return wlc_phy_get_ofdm_rate_lookup()[rlpt & 0x7];
-}
-
 static inline u8 cck_phy2mac_rate(u8 signal)
 {
 	return signal/5;
-- 
2.53.0