[PATCH wireless-next 0/8] wifi: rt2x00: improve the throughput of rt2800usb

[Ho Jie Feng <hjf3108@gmail.com>]

This series improves the throughput of rt2800usb.

Implements
- Frequency offset calibration
- Better fallback rates
- Aggregation
- GRO

Tested on WNDA4100 RT3593, 5 GHz with perf3

  patch                          before        after
                                 TX    RX      TX    RX
  2 crystal calibration          27.7  31.6    28.5  69.7
  4 MCS16 to MCS8 TX status      27.0  70.0    29.4  70.0
  7 RX bulk aggregation          30.5  67.8    30.5  80.9
  8 threaded NAPI with GRO       30.5  80.9    30.5  161.7

RT3070 did not have any visible change for both TX and RX.

Ho Jie Feng (8):
  wifi: rt2x00: start the link tuner when an interface is added
  wifi: rt2800: calibrate the crystal of RT3593 with the beacons
  wifi: rt2800: use the 3SS fallback table of RT3883 on RT3593
  wifi: rt2800: report the MCS16 to MCS8 fallback of RT3593 in TX status
  wifi: rt2800: don't report an A-MPDU length to minstrel_ht
  wifi: rt2800: set the mac80211 fast-xmit and aggregation flags
  wifi: rt2800usb: enable RX bulk aggregation
  wifi: rt2x00usb: use a threaded NAPI with GRO for RX

 drivers/net/wireless/ralink/rt2x00/rt2800.h   |   1 +
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 115 +++++++++++++++++-
 .../net/wireless/ralink/rt2x00/rt2800lib.h    |   4 +
 .../net/wireless/ralink/rt2x00/rt2800usb.c    |  33 ++++-
 .../net/wireless/ralink/rt2x00/rt2800usb.h    |   6 +
 drivers/net/wireless/ralink/rt2x00/rt2x00.h   |  16 ++-
 .../net/wireless/ralink/rt2x00/rt2x00dev.c    | 105 ++++++++++++----
 .../net/wireless/ralink/rt2x00/rt2x00lib.h    |   2 +
 .../net/wireless/ralink/rt2x00/rt2x00link.c   |   9 ++
 .../net/wireless/ralink/rt2x00/rt2x00mac.c    |   6 +
 .../net/wireless/ralink/rt2x00/rt2x00mmio.c   |   2 +-
 .../net/wireless/ralink/rt2x00/rt2x00usb.c    |  52 ++++++--
 12 files changed, 307 insertions(+), 44 deletions(-)


base-commit: 734bef548a96e8774d6eef5dfa2026c6edc4e80b
-- 
2.53.0