Linux wireless drivers development
 help / color / mirror / Atom feed
From: Leonard Lausen <leonard@lausen.nl>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: leonard@lausen.nl, Luka Gejak <luka.gejak@linux.dev>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-wireless@vger.kernel.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH rtw-next v2 2/2] wifi: rtw88: sdio: combine free TX page register reads
Date: Mon, 16 Nov 2026 10:08:05 +0000	[thread overview]
Message-ID: <20261116100804.425592-6-leonard@lausen.nl> (raw)
In-Reply-To: <20261116100804.425592-2-leonard@lausen.nl>

TX capacity checks on non-8051 chips read three adjacent 32-bit registers
in separate SDIO requests. Combine them into one 12-byte CMD53 read when
the existing power/alignment check permits it, with the per-register
fallback otherwise. Propagate read errors before checking queue capacity.

Allocate a DMA-safe buffer at probe and copy its little-endian values
into the caller's array before releasing the host. Holding the host
through the read and copy serializes access to the shared buffer.

Signed-off-by: Leonard Lausen <leonard@lausen.nl>
---
 drivers/net/wireless/realtek/rtw88/sdio.c | 64 +++++++++++++++++++++++++++++--
 drivers/net/wireless/realtek/rtw88/sdio.h |  1 +
 2 files changed, 61 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/sdio.c b/drivers/net/wireless/realtek/rtw88/sdio.c
index ecd4d751c05a5..09337acb76749 100644
--- a/drivers/net/wireless/realtek/rtw88/sdio.c
+++ b/drivers/net/wireless/realtek/rtw88/sdio.c
@@ -26,6 +26,7 @@
 #define RTW_SDIO_TX_FIFO_HIWATER			16
 #define RTW_SDIO_TX_FIFO_LOWATER			8
 #define RTW_SDIO_TX_RETRY_DELAY			msecs_to_jiffies(1)
+#define RTW_SDIO_FREE_TXPG_COUNT			3
 
 static bool rtw_sdio_is_bus_addr(u32 addr)
 {
@@ -675,6 +676,43 @@ static atomic_t *rtw_sdio_8723bs_free_txpg(struct rtw_dev *rtwdev, u8 queue)
 	}
 }
 
+static int rtw_sdio_read_free_txpg(struct rtw_dev *rtwdev, u32 *free_txpg)
+{
+	u32 addr = rtw_sdio_to_bus_offset(rtwdev, REG_SDIO_FREE_TXPG);
+	struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	bool bus_claim = rtw_sdio_bus_claim_needed(rtwsdio);
+	int i, ret;
+
+	if (bus_claim)
+		sdio_claim_host(rtwsdio->sdio_func);
+
+	if (!rtw_sdio_use_memcpy_io(rtwdev, addr, sizeof(u32))) {
+		for (i = 0; i < RTW_SDIO_FREE_TXPG_COUNT; i++) {
+			free_txpg[i] = rtw_sdio_readl(rtwdev,
+						      addr + i * sizeof(u32),
+						      &ret);
+			if (ret)
+				break;
+		}
+		goto out;
+	}
+
+	ret = sdio_memcpy_fromio(rtwsdio->sdio_func,
+				 rtwsdio->free_txpg_buf, addr,
+				 RTW_SDIO_FREE_TXPG_COUNT * sizeof(__le32));
+	if (!ret) {
+		/* Copy the shared DMA buffer before releasing the host. */
+		for (i = 0; i < RTW_SDIO_FREE_TXPG_COUNT; i++)
+			free_txpg[i] = le32_to_cpu(rtwsdio->free_txpg_buf[i]);
+	}
+
+out:
+	if (bus_claim)
+		sdio_release_host(rtwsdio->sdio_func);
+
+	return ret;
+}
+
 static int rtw_sdio_check_free_txpg(struct rtw_dev *rtwdev, u8 queue,
 				    size_t count)
 {
@@ -727,11 +765,15 @@ static int rtw_sdio_check_free_txpg(struct rtw_dev *rtwdev, u8 queue,
 		/* add the pages from the public queue */
 		pages_free += (free_txpg >> 24) & 0xff;
 	} else {
-		u32 free_txpg[3];
+		u32 free_txpg[RTW_SDIO_FREE_TXPG_COUNT];
+		int ret;
 
-		free_txpg[0] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG);
-		free_txpg[1] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 4);
-		free_txpg[2] = rtw_sdio_read32(rtwdev, REG_SDIO_FREE_TXPG + 8);
+		ret = rtw_sdio_read_free_txpg(rtwdev, free_txpg);
+		if (ret) {
+			rtw_warn(rtwdev, "Failed to read free TX pages: %d\n",
+				 ret);
+			return ret;
+		}
 
 		switch (queue) {
 		case RTW_TX_QUEUE_BCN:
@@ -1782,6 +1824,7 @@ static void rtw_sdio_deinit_tx(struct rtw_dev *rtwdev)
 int rtw_sdio_probe(struct sdio_func *sdio_func,
 		   const struct sdio_device_id *id)
 {
+	struct rtw_sdio *rtwsdio;
 	struct ieee80211_hw *hw;
 	struct rtw_dev *rtwdev;
 	int drv_data_size;
@@ -1805,6 +1848,19 @@ int rtw_sdio_probe(struct sdio_func *sdio_func,
 	if (ret)
 		goto err_release_hw;
 
+	rtwsdio = (struct rtw_sdio *)rtwdev->priv;
+	if (!rtw_chip_wcpu_8051(rtwdev)) {
+		rtwsdio->free_txpg_buf =
+			devm_kmalloc_array(rtwdev->dev,
+					   RTW_SDIO_FREE_TXPG_COUNT,
+					   sizeof(*rtwsdio->free_txpg_buf),
+					   GFP_KERNEL);
+		if (!rtwsdio->free_txpg_buf) {
+			ret = -ENOMEM;
+			goto err_deinit_core;
+		}
+	}
+
 	rtw_dbg(rtwdev, RTW_DBG_SDIO,
 		"rtw88 SDIO probe: vendor=0x%04x device=%04x class=%02x",
 		id->vendor, id->device, id->class);
diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h
index 6e7e6009744b0..5c2337ccffb2a 100644
--- a/drivers/net/wireless/realtek/rtw88/sdio.h
+++ b/drivers/net/wireless/realtek/rtw88/sdio.h
@@ -181,6 +181,7 @@ struct rtw_sdio {
 	atomic_t tx_oqt_free;
 	/* one writer at a time between the credit check and the accounting */
 	struct mutex tx_credit_lock;
+	__le32 *free_txpg_buf;
 };
 
 extern const struct dev_pm_ops rtw_sdio_pm_ops;

      parent reply	other threads:[~2026-11-16 10:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 10:08 [PATCH rtw-next v2 0/2] wifi: rtw88: reduce RTL8822CS SDIO request overhead Leonard Lausen
2026-11-16 10:08 ` [PATCH rtw-next v2 1/2] wifi: rtw88: 8822c: filter hardware-handled control frames on SDIO Leonard Lausen
2026-11-16 16:30   ` Luka Gejak
2026-11-16 10:08 ` Leonard Lausen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116100804.425592-6-leonard@lausen.nl \
    --to=leonard@lausen.nl \
    --cc=heiko@sntech.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luka.gejak@linux.dev \
    --cc=pkshih@realtek.com \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox