Linux wireless drivers development
 help / color / mirror / Atom feed
From: Sean Wang <sean.wang@kernel.org>
To: nbd@nbd.name, lorenzo.bianconi@kernel.org
Cc: yu-ching.liu@mediatek.com, chengwei.yu@mediatek.com,
	jacobs.wu@mediatek.com, posh.sun@mediatek.com,
	clifford.hsu@mediatek.com, linux-wireless@vger.kernel.org,
	linux-mediatek@lists.infradead.org,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v2 05/19] wifi: mt76: mt7925: install NAN BIP keys standalone in sta_key_tlv
Date: Mon, 16 Nov 2026 17:16:16 -0600	[thread overview]
Message-ID: <20261116231630.1733906-6-sean.wang@kernel.org> (raw)
In-Reply-To: <20261116231630.1733906-1-sean.wang@kernel.org>

From: Chengwei Yu <chengwei.yu@mediatek.com>

mt7925_mcu_sta_key_tlv() packs a BIP_CMAC_128 key together with the CCMP
key that sta_key_conf cached from an earlier key installation on the same
link: cipher_id BIP_CMAC_128, key_len 32, the CCMP key in the first 16
bytes and the CMAC key in the second 16, indexed by the CCMP key's id.
That matches STA/AP mode, where the IGTK always follows the GTK on the
same WTBL.

A NAN interface has no such pairing. No CCMP key is ever installed on a
NAN or NAN_DATA interface WTBL, so sta_key_conf is still zeroed when a NAN
TX IGTK/BIGTK arrives: the command would carry 16 bytes of zeros as the
first half of the key material and key_id 0 instead of the real 4-7 key
index.

Restrict the combined-key path to non-NAN interfaces so that a NAN BIP key
takes the generic path instead and is installed standalone, with its own
keyidx and its own 16-byte key material.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chengwei Yu <chengwei.yu@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index c800ec2f25dc..a902fdd441cd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -1458,7 +1458,15 @@ mt7925_mcu_sta_key_tlv(struct mt76_wcid *wcid,
 		if (cipher == CONNAC3_CIPHER_NONE)
 			return -EOPNOTSUPP;
 
-		if (cipher == CONNAC3_CIPHER_BIP_CMAC_128) {
+		/* STA/AP mode installs the IGTK together with the CCMP GTK that
+		 * sta_key_conf cached earlier on the same link.  NAN has no such
+		 * pairing: no CCMP key is ever installed on a NAN interface WTBL,
+		 * so sta_key_conf would contribute a zero key and a stale key_id.
+		 * Install the NAN BIP key standalone via the generic path instead.
+		 */
+		if (cipher == CONNAC3_CIPHER_BIP_CMAC_128 &&
+		    vif->type != NL80211_IFTYPE_NAN &&
+		    vif->type != NL80211_IFTYPE_NAN_DATA) {
 			sec->cipher_id = CONNAC3_CIPHER_BIP_CMAC_128;
 			sec->key_id = sta_key_conf->keyidx;
 			sec->key_len = 32;
-- 
2.43.0


  parent reply	other threads:[~2026-11-16 23:18 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 23:16 [PATCH v2 00/19] wifi: mt76: mt7925: add NAN security and improve NDP reliability (part 2) Sean Wang
2026-11-16 23:16 ` [PATCH v2 01/19] wifi: mt76: mt7925: add NAN low power event control on suspend/resume Sean Wang
2026-11-16 23:16 ` [PATCH v2 02/19] wifi: mt76: mt7925: implement NAN key management MCU command Sean Wang
2026-11-16 23:16 ` [PATCH v2 03/19] wifi: mt76: mt7925: add per-peer RX IGTK/BIGTK and RX GTK WTBLs Sean Wang
2026-11-16 23:16 ` [PATCH v2 04/19] wifi: mt76: mt7925: implement mt7925_nan_set_key for NAN security Sean Wang
2026-11-16 23:16 ` Sean Wang [this message]
2026-11-16 23:16 ` [PATCH v2 06/19] wifi: mt76: mt7925: do not disable RX NAPI twice on unload Sean Wang
2026-11-16 23:16 ` [PATCH v2 07/19] wifi: mt76: mt7925: assign the interface WTBL to the NAN management TXQ Sean Wang
2026-11-16 23:16 ` [PATCH v2 08/19] wifi: mt76: mt7925: do not deactivate shared NAN BSS on peer STA removal Sean Wang
2026-11-16 23:16 ` [PATCH v2 09/19] wifi: mt76: gate NAN unicast mgmt by peer availability via STA queues Sean Wang
2026-11-16 23:16 ` [PATCH v2 10/19] wifi: mt76: mt7925: hold NAN mgmt TX to the discovery window Sean Wang
2026-11-16 23:16 ` [PATCH v2 11/19] wifi: mt76: mt7925: double the retry budget for NAN unicast management Sean Wang
2026-11-16 23:16 ` [PATCH v2 12/19] wifi: mt76: mt7925: let TX status of DW-held NAN frames outlive the DW period Sean Wang
2026-11-16 23:16 ` [PATCH v2 13/19] wifi: mt76: mt7925: defer the NAN joined-cluster event out of NAN_START Sean Wang
2026-11-16 23:16 ` [PATCH v2 14/19] wifi: mt76: mt7925: steer NAN handshake frames by committed-bitmap state Sean Wang
2026-11-16 23:16 ` [PATCH v2 15/19] wifi: mt76: mt7925: disable only the RX NAPI instances that exist Sean Wang
2026-11-16 23:16 ` [PATCH v2 16/19] wifi: mt76: mt7925: stop queueing resets once the device is being removed Sean Wang
2026-11-16 23:16 ` [PATCH v2 17/19] wifi: mt76: mt7925: bound the lifetime of NAN unicast management frames Sean Wang
2026-11-16 23:16 ` [PATCH v2 18/19] wifi: mt76: mt7925: always deliver the joined-cluster event through the deferred work Sean Wang
2026-11-16 23:16 ` [PATCH v2 19/19] wifi: mt76: mt792x: allow three channels in the NAN combination Sean Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116231630.1733906-6-sean.wang@kernel.org \
    --to=sean.wang@kernel.org \
    --cc=chengwei.yu@mediatek.com \
    --cc=clifford.hsu@mediatek.com \
    --cc=jacobs.wu@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@kernel.org \
    --cc=nbd@nbd.name \
    --cc=posh.sun@mediatek.com \
    --cc=sean.wang@mediatek.com \
    --cc=yu-ching.liu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox