Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH mt76-next 02/20] wifi: mt76: mt7925: skip the ND offload update of a vif not in the driver
Date: Thu, 19 Nov 2026 13:43:34 +0100	[thread overview]
Message-ID: <20261119124352.1842164-2-nbd@nbd.name> (raw)
In-Reply-To: <20261119124352.1842164-1-nbd@nbd.name>

mac80211 also reports an IPv6 address change of a station interface
that is down, whose drv_priv ieee80211_do_stop() cleared. For an
interface without MLO, __mt7925_ipv6_addr_change() then queues the ND
offload addresses for bss_idx 0, which can be the BSS of another
interface.

Skip the update while the interface is not added to the driver.

Fixes: 9f8f587cab69 ("wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7925/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index b88d92f9aaf2..0e26bfa75143 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -2081,6 +2081,9 @@ static void mt7925_ipv6_addr_change(struct ieee80211_hw *hw,
 	struct ieee80211_bss_conf *bss_conf;
 	int i;
 
+	if (!mvif->phy)
+		return;
+
 	for_each_set_bit(i, &valid, IEEE80211_MLD_MAX_NUM_LINKS) {
 		bss_conf = mt792x_vif_to_bss_conf(vif, i);
 		__mt7925_ipv6_addr_change(hw, bss_conf, idev);
-- 
2.47.3


  reply	other threads:[~2026-11-19 12:44 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 12:43 [PATCH mt76-next 01/20] wifi: mt76: mt7921: skip the ND offload update of a vif not in the driver Felix Fietkau
2026-11-19 12:43 ` Felix Fietkau [this message]
2026-11-19 12:43 ` [PATCH mt76-next 03/20] wifi: mt76: take the remaining wcids off the phy tx_list at reset Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 04/20] wifi: mt76: take the remaining wcids off sta_poll_list " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 05/20] wifi: mt76: mt7915: take the remaining stations off sta_rc_list " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 06/20] wifi: mt76: mt7996: list only published links on sta_rc_list Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 07/20] wifi: mt76: mt7996: take the remaining links off sta_rc_list at reset Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 08/20] wifi: mt76: mt7915: take the TWT flows of a removed station off twt_list Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 09/20] wifi: mt76: mt7996: " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 10/20] wifi: mt76: mt7915: drop the TWT agreements at a full reset Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 11/20] wifi: mt76: mt7996: " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 12/20] wifi: mt76: mt7915: read twt_list under the mutex in twt_stats Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 13/20] wifi: mt76: mt7996: " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 14/20] wifi: mt76: mt7915: publish the global wcid again after a full reset Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 15/20] wifi: mt76: mt7996: " Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 16/20] wifi: mt76: mt7925: keep the antenna mask across a firmware reload Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 17/20] wifi: mt76: mt7925: remove mt7925_mcu_del_dev() Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 18/20] wifi: mt76: mt7921: keep the antenna mask across a firmware reload Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 19/20] wifi: mt76: mt792x: flush frames that still wait for the TX worker Felix Fietkau
2026-11-19 12:43 ` [PATCH mt76-next 20/20] wifi: mt76: mt7925: send the deauth of an MLD station on its AC queue Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119124352.1842164-2-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox