Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH mt76-next 12/20] wifi: mt76: mt7925: read the monitor state under the mutex for deep sleep
Date: Fri, 20 Nov 2026 18:44:51 +0100	[thread overview]
Message-ID: <20261120174459.1657382-12-nbd@nbd.name> (raw)
In-Reply-To: <20261120174459.1657382-1-nbd@nbd.name>

mt7925_deep_sleep_set() reads IEEE80211_CONF_MONITOR before it takes
the mutex. The value can thus miss a monitor change that mt7925_config()
applied under the mutex, and deep sleep can then go on while a monitor
runs. Reachable via the deep-sleep file in debugfs.

Read the flag under the mutex, as mt7925_set_runtime_pm() does.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7925/debugfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7925/debugfs.c
index d0677a24e080..6cfd3c4cac8c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/debugfs.c
@@ -231,8 +231,8 @@ mt7925_deep_sleep_set(void *data, u64 val)
 {
 	struct mt792x_dev *dev = data;
 	struct mt76_connac_pm *pm = &dev->pm;
-	bool monitor = !!(dev->mphy.hw->conf.flags & IEEE80211_CONF_MONITOR);
 	bool enable = !!val;
+	bool monitor;
 
 	if (mt76_is_usb(&dev->mt76))
 		return -EOPNOTSUPP;
@@ -241,6 +241,7 @@ mt7925_deep_sleep_set(void *data, u64 val)
 	if (pm->ds_enable_user == enable)
 		goto out;
 
+	monitor = !!(dev->mphy.hw->conf.flags & IEEE80211_CONF_MONITOR);
 	pm->ds_enable_user = enable;
 	pm->ds_enable = enable && !monitor;
 	mt7925_mcu_set_deep_sleep(dev, pm->ds_enable);
-- 
2.47.3


  parent reply	other threads:[~2026-11-20 17:45 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 17:44 [PATCH mt76-next 01/20] wifi: mt76: mt7925: free the vif links when all links go Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 02/20] wifi: mt76: mt7925: free removed vif links after an RCU grace period Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 03/20] wifi: mt76: remove a replayed station from the driver before the add Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 04/20] wifi: mt76: mt7925: run the reset link replay under the wiphy lock Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 05/20] wifi: mt76: mt7925: take the mutex before the link_info_changed lookup Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 06/20] wifi: mt76: mt7925: hold the mutex for the link lookup in conf_tx Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 07/20] wifi: mt76: mt7925: skip a polled link without a station Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 08/20] wifi: mt76: mt7925: skip a link without a link conf in the MLO PS update Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 09/20] wifi: mt76: mt7925: restore the beacon filter when monitor mode ends Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 10/20] wifi: mt76: usb: do not park the TX worker again under MT76_RESET Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 11/20] wifi: mt76: mt7925: keep the default link in the active links Felix Fietkau
2026-11-20 17:44 ` Felix Fietkau [this message]
2026-11-20 17:44 ` [PATCH mt76-next 13/20] wifi: mt76: clear roc_link before the ROC link is freed Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 14/20] wifi: mt76: mt792x: handle all interfaces of a channel context Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 15/20] wifi: mt76: mt792x: set up the sniffer when a monitor gets its channel Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 16/20] wifi: mt76: buffer Disassociation frames for stations in power save Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 17/20] wifi: mt76: mt7921: read the monitor state under the mutex for deep sleep Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 18/20] wifi: mt76: mt7925: wake the device to unassign a channel context Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 19/20] wifi: mt76: mt7996: keep the firmware log settings across a reload Felix Fietkau
2026-11-20 17:44 ` [PATCH mt76-next 20/20] wifi: mt76: mt7915: " Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120174459.1657382-12-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox