From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
To: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@lists.ath9k.org>
Subject: [RFC/WIP 05/22] ath9k: Use proper start/stop routines for BTCOEX
Date: Tue, 21 Feb 2012 14:52:32 +0530 [thread overview]
Message-ID: <20291.25176.959512.155936@gargle.gargle.HOWL> (raw)
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 3 ++-
drivers/net/wireless/ath/ath9k/gpio.c | 31 ++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath9k/main.c | 19 ++-----------------
3 files changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index aa60983..2ede897 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -456,7 +456,8 @@ struct ath_btcoex {
int ath9k_init_btcoex(struct ath_softc *sc);
void ath9k_deinit_btcoex(struct ath_softc *sc);
-int ath_init_btcoex_timer(struct ath_softc *sc);
+void ath9k_start_btcoex(struct ath_softc *sc);
+void ath9k_stop_btcoex(struct ath_softc *sc);
void ath9k_btcoex_timer_resume(struct ath_softc *sc);
void ath9k_btcoex_timer_pause(struct ath_softc *sc);
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index ef23624..1ca2ca5 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -245,7 +245,7 @@ static void ath_btcoex_no_stomp_timer(void *arg)
ath9k_ps_restore(sc);
}
-int ath_init_btcoex_timer(struct ath_softc *sc)
+static int ath_init_btcoex_timer(struct ath_softc *sc)
{
struct ath_btcoex *btcoex = &sc->btcoex;
@@ -318,6 +318,35 @@ void ath9k_btcoex_timer_pause(struct ath_softc *sc)
btcoex->hw_timer_enabled = false;
}
+void ath9k_start_btcoex(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+
+ if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
+ !ah->btcoex_hw.enabled) {
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI))
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ ath9k_hw_btcoex_enable(ah);
+
+ if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
+ ath9k_btcoex_timer_resume(sc);
+ }
+}
+
+void ath9k_stop_btcoex(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+
+ if (ah->btcoex_hw.enabled &&
+ ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
+ ath9k_hw_btcoex_disable(ah);
+ if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
+ ath9k_btcoex_timer_pause(sc);
+ ath_mci_flush_profile(&sc->btcoex.mci);
+ }
+}
+
void ath9k_deinit_btcoex(struct ath_softc *sc)
{
if ((sc->btcoex.no_stomp_timer) &&
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index ec82e92..ee5335c 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1079,16 +1079,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_pcu_lock);
- if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
- !ah->btcoex_hw.enabled) {
- if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI))
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_LOW_WLAN_WGHT);
- ath9k_hw_btcoex_enable(ah);
-
- if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
- ath9k_btcoex_timer_resume(sc);
- }
+ ath9k_start_btcoex(sc);
if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
common->bus_ops->extn_synch_en(common);
@@ -1189,13 +1180,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
/* Ensure HW is awake when we try to shut it down. */
ath9k_ps_wakeup(sc);
- if (ah->btcoex_hw.enabled &&
- ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
- ath9k_hw_btcoex_disable(ah);
- if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
- ath9k_btcoex_timer_pause(sc);
- ath_mci_flush_profile(&sc->btcoex.mci);
- }
+ ath9k_stop_btcoex(sc);
spin_lock_bh(&sc->sc_pcu_lock);
--
1.7.9.1
reply other threads:[~2012-02-21 9:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20291.25176.959512.155936@gargle.gargle.HOWL \
--to=c_manoha@qca.qualcomm.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).